Search NASA⌕ Search

Engineering topics

Li, J

Publications and source records attributed to Li, J.

At least 145 records · Page 8

Observations of low-aberration plasma lens focusing of relativistic electron beams at the underdense threshold

Focusing of a 15 MeV electron bunch by a plasma lens operated at the threshold of the underdense regime has been demonstrated. The strong, 1.7 cm focal length, plasma lens focused both transverse directions simultaneously and reduced the minimum area of the beam spot by a factor of 23. It is shown through analytic analysis and simulation that the observed spherical aberration of this underdense lens, when expressed as the fractional departure of the focusing strength from its linear expectation, is DELTAK/K=0.08+-0.04. This is significantly lower than the minimum theoretical value for the spherical aberration of an overdense plasma lens. Parameter scans showing the dependence of focusing performance on beam charge, as well as time resolved measurements of the focused electron bunch, are reported.

43 PARTICLE ACCELERATORS↗

ANALYSIS OF RADIAL VELOCITY DATA BY A NOVEL ADAPTIVE APPROACH

In this paper, we introduce an estimation technique for analyzing radial velocity data commonly encountered in extrasolar planet detection. We discuss the Keplerian model for radial velocity data measurements and introduce a technique named the iterative adaptive approach (IAA) to estimate the three-dimensional spectrum (power versus eccentricity, orbital period and periastron passage time) of the radial velocity data. We then discuss different ways to regularize the IAA algorithm in the presence of noise and measurement errors. We also discuss briefly the computational aspects of the method and introduce a computationally efficient version of IAA. Finally, we establish the significance of the spectral peaks by using a relaxation maximum likelihood algorithm and a generalized likelihood ratio test. Numerical experiments are carried out on both simulated and real life data sets to evaluate the performance of our method. The real life data sets discussed are radial velocity measurements of the stars HD 63454, HD 208487, and GJ 876.

79 ASTRONOMY AND ASTROPHYSICS↗

Determination of the Magnetic Structure of Yb3Pt4:a k=0 Local-moment Antiferromagnet

We have used neutron-diffraction measurements to study the zero-field magnetic structure of the intermetallic compound Yb{sub 3}Pt{sub 4}, which was earlier found to order antiferromagnetically at the Neel temperature T{sub N} = 2.4 K, and displays a field-driven quantum-critical point at 1.6 T. In Yb{sub 3}Pt{sub 4}, the Yb moments sit on a single low-symmetry site in the rhombohedral lattice with space group R{bar 3}. The Yb ions form octahedra with edges that are twisted with respect to the hexagonal unit cell, a twisting that results in every Yb ion having exactly one Yb nearest neighbor. Below T{sub N}, we found new diffracted intensity due to a k=0 magnetic structure. This magnetic structure was compared to all symmetry-allowed magnetic structures and was subsequently refined. The best-fitting magnetic-structure model is antiferromagnetic and involves pairs of Yb nearest neighbors on which the moments point almost exactly toward each other. This structure has moment components within the ab plane as well as parallel to the c axis although the easy magnetization direction lies in the ab plane. Our magnetization results suggest that besides the crystal-electric-field anisotropy, anisotropic exchange favoring alignment along the c axis is responsible for the overall direction of the ordered moments. The magnitude of the ordered Yb moments in Yb{sub 3}Pt{sub 4} is 0.81 {mu}{sub B}/Yb at 1.4 K. The analysis of the bulk properties, the size of the ordered moment, and the observation of well-defined crystal-field levels argue that the Yb moments are spatially localized in zero field.

36 MATERIALS SCIENCE↗

Vulnerability of the Superficial Zone of Immature Articular Cartilage to Compressive Injury

The zonal composition and functioning of adult articular cartilage causes depth-dependent responses to compressive injury. In immature cartilage, shear and compressive moduli as well as collagen and sulfated glycosaminoglycan (sGAG) content also vary with depth. However, there is little understanding of the depth-dependent damage caused by injury. Since injury to immature knee joints most often causes articular cartilage lesions, this study was undertaken to characterize the zonal dependence of biomechanical, biochemical, and matrix-associated changes caused by compressive injury. Disks from the superficial and deeper zones of bovine calves were biomechanically characterized. Injury to the disks was achieved by applying a final strain of 50% compression at 100%/second, followed by biomechanical recharacterization. Tissue compaction upon injury as well as sGAG density, sGAG loss, and biosynthesis were measured. Collagen fiber orientation and matrix damage were assessed using histology, diffraction-enhanced x-ray imaging, and texture analysis. Injured superficial zone disks showed surface disruption, tissue compaction by 20.3 {+-} 4.3% (mean {+-} SEM), and immediate biomechanical impairment that was revealed by a mean {+-} SEM decrease in dynamic stiffness to 7.1 {+-} 3.3% of the value before injury and equilibrium moduli that were below the level of detection. Tissue areas that appeared intact on histology showed clear textural alterations. Injured deeper zone disks showed collagen crimping but remained undamaged and biomechanically intact. Superficial zone disks did not lose sGAG immediately after injury, but lost 17.8 {+-} 1.4% of sGAG after 48 hours; deeper zone disks lost only 2.8 {+-} 0.3% of sGAG content. Biomechanical impairment was associated primarily with structural damage. The soft superficial zone of immature cartilage is vulnerable to compressive injury, causing superficial matrix disruption, extensive compaction, and textural alteration, which results in immediate loss of biomechanical function. In conjunction with delayed superficial sGAG loss, these changes may predispose the articular surface to further softening and tissue damage, thus increasing the risk of development of secondary osteoarthritis.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of Strain on the Growth of InAs/GaSb Superlattices: An X-ray Diffraction Study

We present a detailed x-ray diffraction study of the strain in InAs/GaSb superlattices grown by molecular beam epitaxy. The superlattices were grown with either InSb or GaAs interfaces (IFs). We show that the superlattice morphology, either planar or nanostructured, is dependent on the chemical bonds at the heterointerfaces. In both cases, the misfit strain has been determined for the superlattice layers and the IFs. We also determined how the magnitude and sign of this strain is crucial in governing the morphology of the superlattice. Our analysis suggests that the growth of self-assembled nanostructures may be extended to many systems generally thought to have too small a lattice mismatch.

36 MATERIALS SCIENCE↗

Ab initio no core calculations of light nuclei and preludes to Hamiltonian quantum field theory

Recent advances in ab initio quantum many-body methods and growth in computer power now enable highly precise calculations of nuclear structure. The precision has attained a level sufficient to make clear statements on the nature of 3-body forces in nuclear physics. Total binding energies, spin-dependent structure effects, and electroweak properties of light nuclei play major roles in pinpointing properties of the underlying strong interaction. Eventually, we anticipate a theory bridge with immense predictive power from QCD through nuclear forces to nuclear structure and nuclear reactions. Light front Hamiltonian quantum field theory offers an attractive pathway and we outline key elements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Upper critical field and Raman spectra of MgB{sub 2} thin films irradiated with low energy oxygen ion

The structure, upper critical field, and Raman spectrum of epitaxial MgB{sub 2} thin films irradiated by 300 keV O{sub 2}{sup +} ions have been investigated. Lattice parameter c expands after irradiation. There is a significant increase in upper critical field in the moderately irradiated films, while the critical temperature is reduced slightly. The values of critical field at zero temperature exhibit a maximum for samples with a moderate irradiation level for the applied magnetic field both perpendicular and parallel to the film surface. The temperature dependence of the anisotropy parameter, which is defined as the ratio of the upper critical field with the field parallel to the film surface and perpendicular to the film surface, reveals that oxygen ion irradiation mainly affects the sigma band at a low irradiation level. With increasing irradiation level, pi band scattering is strongly enhanced, and finally both bands are in the dirty limit. A broad peak centered around 570 cm{sup -1} is observed in the Raman spectrum of the unirradiated films, and the peak position has a visible redshift in the irradiated samples. In particular, high-frequency spectral structures appear and become dominant, while the E{sub 2g} broad band diminishes gradually with increasing irradiation fluence. The results are discussed by considering the disorder-induced change in carrier scattering within and between the sigma and pi bands and a violation of the Raman selection rules due to oxygen ion irradiation.

36 MATERIALS SCIENCE↗

Sound velocities of compressed Fe{sup 3}c from simultaneous synchrotron x-ray diffraction and nuclear resonant scattering measurements.

The applications of nuclear resonant scattering in laser-heated diamond anvil cells have provided an important probe for the magnetic and vibrational properties of {sup 57}Fe-bearing materials under high pressure and high temperature. Synchrotron X-ray diffraction is one of the most powerful tools for studying phase stability and equation of state over a wide range of pressure and temperature conditions. Recently an experimental capability has been developed for simultaneous nuclear resonant scattering and X-ray diffraction measurements using synchrotron radiation. Here the application of this method to determine the sound velocities of compressed Fe{sub 3}C is shown. The X-ray diffraction measurements allow detection of microscale impurities, phase transitions and chemical reactions upon compression or heating. They also provide information on sample pressure, grain size distribution and unit cell volume. By combining the Debye velocity extracted from the nuclear resonant inelastic X-ray scattering measurements and the structure, density and elasticity data from the X-ray diffraction measurements simultaneously obtained, more accurate sound velocity data can be derived. Our results on few-crystal and powder samples indicate strong anisotropy in the sound velocities of Fe{sub 3}C under ambient conditions.

43 PARTICLE ACCELERATORS↗

Thermal removal of mercury in spent powdered activated carbon from TOXECON process

This research developed and demonstrated a technology to liberate Hg adsorbed onto powdered activated carbon (PAC) by the TOXECON process using pilot-scale high temperature air slide (HTAS) and bench-scale thermogravimetric analyzer (TGA). The HTAS removed 65, 83, and 92% of Hg captured with PAC when ran at 900{sup o}F, 1,000{sup o}F, and 1,200 {sup o}F, respectively, while the TGA removed 46 and 100% of Hg at 800 {sup o}F and 900{sup o}F, respectively. However, addition of CuO-Fe{sub 2}O{sub 3} mixture and CuCl catalysts enhanced Hg removal and PAC regeneration at lower temperatures. CuO-Fe{sub 2}O{sub 3} mixture performed better than CuCl in PAC regeneration. Scanning electron microscopy images and energy dispersive X-ray analysis show no change in PAC particle aggregation or chemical composition. Thermally treated sorbents had higher surface area and pore volume than the untreated samples indicating regeneration. The optimum temperature for PAC regeneration in the HTAS was 1,000{sup o}F. At this temperature, the regenerated sorbent had sufficient adsorption capacity similar to its virgin counterpart at 33.9% loss on ignition. Consequently, the regenerated PAC may be recycled back into the system by blending it with virgin PAC.

01 COAL, LIGNITE, AND PEAT↗

Characterization of wall temperature and radiation power through cylindrical dump micro-combustors

The micro-combustor (emitter) is a key component of the micro-thermophotovoltaic (TPV) system. An experimental study on the wall temperature and radiation power through the wall of a series of cylindrical dump micro-combustors was carried out. The effects of combustor diameter (d), combustor length (L), step height (s), flow velocity (u{sub 0}) and fuel-air equivalence ratio ({phi}) on the wall temperature distribution were investigated. 'Emitter efficiency' was defined and quantified based on the measured wall temperature. It was demonstrated that for this particular configuration, that is, a cylindrical micro-combustor with a backward-facing step, the two dimensionless ratios -L/d and s/d, are sufficient to determine the emitter efficiency, provided the flow velocity (U{sub e}) and {phi} are known. Based on this result, the effects of the dimensionless step height (s/d) on the emitter efficiency were examined. It was shown that such a sudden flow expansion in the dump combustors does not favor the radiation through the outer wall. Finally, the position of the highest wall temperature and its variation with the flow Reynolds number were discussed. It was noted that the Reynolds number and the relative flow expansion (s/d) alone are inadequate to determine the relative position of the highest wall temperature. (author)

30 DIRECT ENERGY CONVERSION↗

Magneto-optical Kerr effect in perpendicularly magnetized Co/Pt films on two-dimensional colloidal crystals

Magneto-optical Kerr effect and optical reflectance are measured in the visible region for perpendicularly magnetized Co/Pt films on self-assembly array of two-dimensional closely packed polystyrene spheres. Peaks and valleys are observed in the magneto-optical Kerr and the optical reflectance spectra and their positions scale with the sphere diameter. In explanation of the above scenario, not only the Mie optical scattering of single nanocaps but also the surface plasmon resonance should be considered. This work will facilitate development of magnetoplasmonic nanosensors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of hydrogen bond on coal extraction by in-situ vacuum FTIR

Coal chemical formation environment might result in different properties of hydrogen bonds in coal structure. The thermo stability, amount and types of hydrogen bond in six typical Chinese coal macerals were investigated by in situ vacuum Fourier transform infrared spectroscopy (FTIR). It was found that three types of hydrogen bond were involved in coal structure, which were OH-N, OH self associated, and OH tetrapolymer hydrogen bond. There was no correlation between the amount of three types of hydrogen bonds and extraction yield. The thermo stability of hydrogen bond in inertinite was stronger than that of vitrinite, especially the thermo stability of hydrogen bond in Pingshuo inertinite.

01 COAL, LIGNITE, AND PEAT↗

A Pentacyclic Aurora Kinase Inhibitor (AKI-001) With High in Vivo Potency And Oral Bioavailability

Aurora kinase inhibitors have attracted a great deal of interest as a new class of antimitotic agents. We report a novel class of Aurora inhibitors based on a pentacyclic scaffold. A prototype pentacyclic inhibitor 32 (AKI-001) derived from two early lead structures improves upon the best properties of each parent and compares favorably to a previously reported Aurora inhibitor, 39 (VX-680). The inhibitor exhibits low nanomolar potency against both Aurora A and Aurora B enzymes, excellent cellular potency (IC{sub 50} < 100 nM), and good oral bioavailability. Phenotypic cellular assays show that both Aurora A and Aurora B are inhibited at inhibitor concentrations sufficient to block proliferation. Importantly, the cellular activity translates to potent inhibition of tumor growth in vivo. An oral dose of 5 mg/kg QD is well tolerated and results in near stasis (92% TGI) in an HCT116 mouse xenograft model.

59 BASIC BIOLOGICAL SCIENCES↗

Study on premixed combustion in cylindrical micro combustors: Transient flame behavior and wall heat flux

The micro combustor is a key component of the micro thermophotovoltaic (TPV) system. Improving the wall temperature of the micro combustor is an effective way to elevate the system efficiency. An experimental study on the wall temperature and radiation heat flux of a series of cylindrical micro combustors (with a backward-facing step) was carried out. For the micro combustors with d = 2 mm, the regime of successful ignition (under the cold wall condition) was identified for different combustor lengths. Acoustic emission was detected for some cases and the emitted sound was recorded and analyzed. Under the steady-state condition, the effects of the combustor diameter (d), combustor length (L), flow velocity (u{sub 0}) and fuel-air equivalence ratio ({phi}) on the wall temperature distribution were investigated by measuring the detailed wall temperature profiles. In the case that the micro combustor is working as an emitter, the optimum efficiency was found at {phi} {approx} 0.8, independent of the combustor dimensions (d and L) and the flow velocity. Under the experimental conditions employed in the present study, the positions of the peak wall temperature were found to be about 8-11 mm and 4-6 mm from the step for the d = 3 mm and d = 2 mm micro combustors, respectively, which are 8-11 and 8-12 times of their respective step heights. This result suggests that the backward-facing step employed in the combustor design is effective in stabilizing the flame position. (author)

30 DIRECT ENERGY CONVERSION↗