Search NASA⌕ Search

Engineering topics

Li, Sheng

Publications and source records attributed to Li, Sheng.

At least 19 records

Perturbation of soil organic carbon induced by land-use change from primary forest

Abstract The impact of land-use change (LUC) on soil organic carbon (SOC) has been a wide concern of land management policymakers because CO 2 emissions induced by LUC have been the second largest carbon source worldwide. However, due to insufficient data quality and limited biome coverage, a global big picture of the impact of LUC on SOC is still not clear. This study conducted a meta-analysis on 288 independent observations sourced from 62 peer-reviewed papers to provide a global summary of the change in SOC after the conversion of primary forests into other land-use types. The conversion of primary forest to cropland resulted in the most severe SOC loss (−33.2%), followed by conversion into plantation forests (−22.3%) and secondary forests (−19.1%). Nonetheless, SOC increased by 9.1% after a conversion from primary forests into pasture. More SOC loss was found at sites with lower precipitation for primary forests converted to cropland and plantation forests. The SOC loss decreased consistently with increasing mean annual temperature (MAT) for all four types of LUC. Moreover, the loss of SOC tended to worsen over time when primary forests are converted to cropland or plantation forests. In contrast, SOC loss recovered over time following conversion to secondary forests. The gain of SOC gradually increased over time after conversion to pastures. To conclude, the changes in SOC are related not only to the land-use type but also to precipitation, temperature and turn years after LUC. Due to limited data, this study focuses on soil profiles within 30 cm depth, and future research should explore SOC dynamics induced by LUC at greater depths. Overall, cases of SOC loss of approximately 30% following deforestation were very common (except for conversion to pasture), and the results of this study show that the loss of SOC following LUC should be carefully considered and monitored in land management.

Zhang, Zhiyuan (ORCID:0000000223407001)↗

Structural and dynamic changes in P-Rex1 upon activation by PIP 3 and inhibition by IP 4

PIP 3 -dependent Rac exchanger 1 (P-Rex1) is abundantly expressed in neutrophils and plays central roles in chemotaxis and cancer metastasis by serving as a guanine-nucleotide exchange factor (GEF) for Rac. The enzyme is synergistically activated by PIP 3 and heterotrimeric Gβγ subunits, but mechanistic details remain poorly understood. While investigating the regulation of P-Rex1 by PIP 3 , we discovered that Ins(1,3,4,5)P 4 (IP 4 ) inhibits P-Rex1 activity and induces large decreases in backbone dynamics in diverse regions of the protein. Cryo-electron microscopy analysis of the P-Rex1·IP 4 complex revealed a conformation wherein the pleckstrin homology (PH) domain occludes the active site of the Dbl homology (DH) domain. This configuration is stabilized by interactions between the first DEP domain (DEP1) and the DH domain and between the PH domain and a 4-helix bundle (4HB) subdomain that extends from the C-terminal domain of P-Rex1. Disruption of the DH–DEP1 interface in a DH/PH-DEP1 fragment enhanced activity and led to a more extended conformation in solution, whereas mutations that constrain the occluded conformation led to decreased GEF activity. Variants of full-length P-Rex1 in which the DH–DEP1 and PH–4HB interfaces were disturbed exhibited enhanced activity during chemokineinduced cell migration, confirming that the observed structure represents the autoinhibited state in living cells. Interactions with PIP 3 -containing liposomes led to disruption of these interfaces and increased dynamics protein-wide. Our results further suggest that inositol phosphates such as IP 4 help to inhibit basal P-Rex1 activity in neutrophils, similar to their inhibitory effects on phosphatidylinositol-3-kinase.

59 BASIC BIOLOGICAL SCIENCES↗

Tailoring physical properties of crystals through synthetic temperature control: A case study for new polymorphic NbFeT e 2 phases

Growth parameters play a significant role in the crystal quality and physical properties of layered materials. Here we present a case study on a van der Waals magnetic NbFeTe 2 material. Two different types of polymorphic NbFeTe 2 phases, synthesized at different temperatures, display significantly different behaviors in crystal symmetry, electronic structure, electrical transport, and magnetism. While the phase synthesized at low temperature showing behavior consistent with previous reports, the new phase synthesized at high temperature, has completely different physical properties, such as metallic resistivity, long-range ferromagnetic order, anomalous Hall effect, negative magnetoresistance, and distinct electronic structures. Neutron diffraction reveals out-of-plane ferromagnetism below 70 K, consistent with the electrical transport and magnetic susceptibility studies. Finally, our work suggests that simply tuning synthetic parameters in a controlled manner could be an effective route to alter the physical properties of existing materials potentially unlocking new states of matter, or even discovering new materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ideal weak topological insulator and protected helical saddle points

Here we report the design and observation of an ideal weak topological insulator in a quasi-one-dimensional bismuth halide, Bi 4 I 1.2 Br 2.8 . Via angle-resolved photoemission spectroscopy, we identify that Bi 4 I 1.2 Br 2.8 hosts topological surface states on the (100)′ side surface in the form of two anisotropic π-offset Dirac cones while topologically dark on the (001) top surface. The results fully determine a unique side-surface Hamiltonian and thereby identify two pairs of nondegenerate helical saddle points. The fact that both the surface Dirac and helical saddle points are in the global bulk band gap of 195 meV suggests the potential of this system to be a fertile ground for topological many-body physics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controlled Growth of Single‐Crystal Graphene Wafers on Twin‐Boundary‐Free Cu(111) Substrates

Single-crystal graphene (SCG) wafers are needed to enable mass-electronics and optoelectronics owing to their excellent properties and compatibility with silicon-based technology. Controlled synthesis of high-quality SCG wafers can be done exploiting single-crystal Cu(111) substrates as epitaxial growth substrates recently. However, current Cu(111) films prepared by magnetron sputtering on single-crystal sapphire wafers still suffer from in-plane twin boundaries, which degrade the SCG chemical vapor deposition. Here, in this study, it is shown how to eliminate twin boundaries on Cu and achieve 4 in. Cu(111) wafers with ≈95% crystallinity. The introduction of a temperature gradient on Cu films with designed texture during annealing drives abnormal grain growth across the whole Cu wafer. In-plane twin boundaries are eliminated via migration of out-of-plane grain boundaries. SCG wafers grown on the resulting single-crystal Cu(111) substrates exhibit improved crystallinity with >97% aligned graphene domains. As-synthesized SCG wafers exhibit an average carrier mobility up to 7284 cm 2 V −1 s −1 at room temperature from 103 devices and a uniform sheet resistance with only 5% deviation in 4 in. region.

36 MATERIALS SCIENCE↗

Charge order induced Dirac pockets in the nonsymmorphic crystal TaTe 4

The interplay between charge order (CO) and nontrivial band topology has spurred tremendous interest in understanding topological excitations beyond the single-particle description. In a quasi-one-dimensional nonsymmorphic crystal TaTe 4 , the (2a×2b×3c) charge ordered ground state drives the system into a space group where the symmetry indicator features the emergence of Dirac fermions and unconventional double Dirac fermions. In this study, using angle-resolved photoemission spectroscopy and first-principles calculations, we provide evidence of the CO induced Dirac fermion-related bands near the Fermi level. Furthermore, the band folding at the Fermi level is compatible with the new periodicity dictated by the CO, indicating that the electrons near the Fermi level follow the crystalline symmetries needed to host double Dirac fermions in this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sequentially regular polymer acceptors featuring flexible spacers for high-performance and mechanically robust all-polymer solar cells

Developing high-performance and mechanically robust polymer solar cells (PSCs) is crucial for realizing wearable power sources. While efficient all-polymer solar cells (all-PSCs) can be fabricated from polymerized small-molecule acceptors (PSMAs) with high optical absorption and electron mobilities, they still show limited mechanical robustness. Here, we achieve highly efficient and mechanically robust all-PSCs by designing a PSMA (PYFS-Reg) containing sequence-regular flexible spacers (FSs). The regular incorporation of the FS units into PSMAs is essential in simultaneously improving the electrical and mechanical properties of blend films. As a result, all-PSCs featuring PYFS-Reg achieve a high power conversion efficiency (PCE = 16.1%) and stretchability (crack onset strain (COS) = 22.4%), outperforming PSMAs without FSs (i.e., PYBDT, PCE = 12.6% and COS = 11.7%) or with randomly distributed FSs (i.e., PYFS-Ran, PCE = 12.2% and COS = 18.1%). Importantly, these all-PSCs are fabricated by an environmentally benign, non-halogenated solvent process. To further demonstrate their feasible applications in wearable devices, we construct intrinsically stretchable (IS) all-PSCs by using PYFS-Reg-based active layers, which exhibit a high PCE (10.6%) and excellent device stretchability (strain at PCE 80% = 36.7%).

14 SOLAR ENERGY↗

Effects of a composite flame retardant system on the flame retardancy and mechanical performance of epoxy resin adhesive

Abstract A flame‐retarded epoxy resin (ER) adhesive with strong flame retardancy and adhesion performance was prepared. The coated ammonium polyphosphate (MFAPP), melamine (MEL), and organic montmorillonite (OMMT) were mixed to prepare a composite flame retardant. It was subsequently blended with a toughened ER thoroughly and then the mixture was cured with polyamide. The resultant ER adhesive thermosets achieved UL‐94 V‐0 rating during vertical burning test, and the limiting oxygen index value was as high as 31.6%. The shear strength of the ER adhesive was 27.9 MPa when 25 wt% MFAPP/MEL/OMMT was introduced. Compared with the pure adhesive, the flame retardant epoxy adhesive maintained outstanding adhesion performance because of the good compatibility between the composite flame retardant additives and the toughened ER adhesive. Cone calorimetry tests indicated that the release of heat and smoke were obviously declined with the incorporation of the composite flame retardant system in comparison to pure ER adhesive thermoset. The investigation of flame retardant mechanism revealed that the composite MFAPP/MEL/OMMT flame retardant system stimulated the generation of highly expanded, integral, and strong char layer and the formed char layer exerted superior insulation effect during combusiton. The present work provided an alternative approach to prepare flame retardant ER adhesive with the similar excellent adhesive performance.

Li, Sheng↗

Structural basis for the mechanisms of human presequence protease conformational switch and substrate recognition

Presequence protease (PreP), a 117kDa mitochondrial M16C metalloprotease vital for mitochondrial proteostasis, degrades presequence peptides cleaved off from nuclear-encoded proteins and other aggregation-prone peptides, such as amyloid β (Aβ). PreP structures have only been determined in a closed conformation; thus, the mechanisms of substrate binding and selectivity remain elusive. Here, we leverage advanced vitrification techniques to overcome the preferential denaturation of one of two ~55 kDa homologous domains of PreP caused by air-water interface adsorption. Thereby, we elucidate cryoEM structures of three apo-PreP open states along with Aβ- and citrate synthase presequence-bound PreP at 3.3–4.6 Å resolution. Together with integrative biophysical and pharmacological approaches, these structures reveal the key stages of the PreP catalytic cycle and how the binding of substrates or PreP inhibitor drives a rigid body motion of the protein for substrate binding and catalysis. Together, our studies provide key mechanistic insights into M16C metalloproteases for future therapeutic innovations.

59 BASIC BIOLOGICAL SCIENCES↗

Gate-Tunable Transport in Quasi-One-Dimensional α-Bi 4 I 4 Field Effect Transistors

Bi 4 I 4 belongs to a novel family of quasi-one-dimensional (1D) topological insulators (TIs). While its β phase was demonstrated to be a prototypical weak TI, the α phase, long thought to be a trivial insulator, was recently predicted to be a rare higher order TI. Here, we report the first gate tunable transport together with evidence for unconventional band topology in exfoliated α-Bi 4 I 4 field effect transistors. We observe a Dirac-like longitudinal resistance peak and a sign change in the Hall resistance; their temperature dependences suggest competing transport mechanisms: a hole-doped insulating bulk and one or more gate-tunable ambipolar boundary channels. Our combined transport, photoemission, and theoretical results indicate that the gate-tunable channels likely arise from novel gapped side surface states, two-dimensional (2D) TI in the bottommost layer, and/or helical hinge states of the upper layers. Markedly, a gate-tunable supercurrent is observed in an α-Bi 4 I 4 Josephson junction, underscoring the potential of these boundary channels to mediate topological superconductivity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Transport anomalies in the layered compound BaPt 4 Se 6

We report a layered ternary selenide BaPt 4 Se 6 featuring sesqui-selenide Pt 2 Se 3 layers sandwiched by Ba atoms. The Pt 2 Se 3 layers in this compound can be derived from the Dirac-semimetal PtSe 2 phase with Se vacancies that form a honeycomb structure. This structure results in a Pt (VI) and Pt (II) mixed-valence compound with both PtSe 6 octahedra and PtSe 4 square net coordination configurations. Temperature-dependent electrical transport measurements suggest two distinct anomalies: a resistivity crossover, mimic to the metal-insulator (M-I) transition at ~150 K, and a resistivity plateau at temperatures below 10 K. The resistivity crossover is not associated with any structural, magnetic, or charge order modulated phase transitions. Magnetoresistivity, Hall, and heat capacity measurements concurrently suggest an existing hidden state below 5 K in this system. Angle-resolved photoemission spectroscopy measurements reveal a metallic state and no dramatic reconstruction of the electronic structure up to 200 K.

36 MATERIALS SCIENCE↗