Search NASA⌕ Search

Engineering topics

Link, Elisa M

Publications and source records attributed to Link, Elisa M.

Tin Nitride Atomic Layer Deposition Using N2H4

There is substantial lag in the development of atomic layer deposition (ALD) processes for nitrides compared to the high-quality, conformal oxides for which ALD has become the standard. A major factor in this disparity is the ready availability of highly reactive oxygen sources (mainly H2O, O2, and H2O2). High-energy nitrogen precursors are similarly required for the efficient incorporation of nitrogen in a film. Ammonia has often been used in conjunction with metal chlorides but requires relatively high temperatures for thermal ALD. Plasma-enhanced ALD can utilize molecular nitrogen as a precursor but can reduce film conformality on complex supports and damage the underlying substrate. Hydrazine (N2H4) is an alternative precursor which has been rarely explored for the fabrication of nitrides in ALD, but which is experiencing a surge in popularity due to its high reactivity, which enables the deposition of nitrides as-yet undemonstrated by ALD.(1) The added reactivity and volatility of liquid hydrazine may enable new reaction mechanisms, lower deposition temperatures, and conformality for high aspect ratio applications. Sn3N4 is a metastable semiconductor which shares a crystal structure with its analog, Si3N4; unlike Si3N4, Sn3N4 has only recently been grown by ALD,(2) being synthesized much more often through reactive sputtering.(3) As a binary, Sn3N4 has applications as a battery anode material, for photoelectrochemistry, and optoelectronic devices. We will report progress on the deposition of SnxNy films from tetrakis(dimethylamido) tin (TDMASn) and N2H4. Growth per cycle of this material (determined by x-ray reflectivity) is 0.4 A at 200 C, similar to the sole report of Sn3N4 from PE-ALD,(2) despite films being substantially Sn-rich. Identification of ALD growth window and self-limiting deposition characteristics are underway; initial testing indicates a competing chemical vapor deposition process which can be eliminated with adequate tuning of pulse/purge characteristics. A comparison of film conductivity and optical absorption at different growth temperatures will be presented. General issues of N2H4 purity and routes to prevent or control oxynitride formation will be discussed. (1) Du, L., et al. The First Atomic Layer Deposition Process for FexN Films. Chem. Comm., 2019, ASAP. DOI: 10.1039/C8CC10175B. (2) Stewart, D. M., et al. Tin Oxynitride Anodes by Atomic Layer Deposition for Solid-State Batteries. Chem. Mater. 2018, 30, 2526-34. (3) Caskey, C. M., et al. Semiconducting Properties of Spinel Tin Nitride and Other IV3N4 Polymorphs. J. Mater. Chem. C 2015, 3, 1389-96.

14 SOLAR ENERGY↗

Unique interfacial thermodynamics of few-layer 2D MoS 2 for (photo)electrochemical catalysis

The electronic structure of few-layer MoS2 is studied by in-situ and operando spectroelectrochemistry in conditions relevant to its use as an electrocatalyst. We show that electron injection into the conduction band is coupled with a redshift of the exciton resonance, the magnitude of which depends on the number of vertical MoS 2 layers. In addition, the applied electric field/electronic doping imparts uniaxial tensile strain evidenced by broadening Raman signals, indicating that under conditions of electrocatalysis, the system is structurally different from equilibrium. We demonstrate that field/carrier induced changes to the electronic structure of MoS 2 alter the band edge positions which changes the fundamental thermodynamic driving force for charge transfer. This property is a function of the applied potential, an effect unique to 2D semiconductors. The dynamic band edge potentials change the relevant interfacial energetics for charge transfer and has strong implications for the mechanistic understanding of (photo)catalytic fuel-forming reactions using two-dimensional systems.

36 MATERIALS SCIENCE↗

ZnSiP2 Thin Film Growth for Si-Based Tandem Photovoltaics

ZnSiP 2 is a ternary III-V analog with 0.5% lattice mismatch with Si and a 2.1 eV band gap, in the appropriate range for a top cell on a Si-based tandem device. We have previously shown that ZnSiP 2 has many properties suitable for applications to Si-based tandem photovoltaics using bulk single crystals grown in a Zn flux. The favorable results obtained from characterization of bulk material encourage the development of ZnSiP 2 as a photovoltaic absorber. To pursue this development, we have constructed a thin film growth reactor. This reactor employs a combination of chemical vapor deposition, using silane and phosphine as precursor gases, and physical vapor deposition, using an effusion cell to evaporate elemental Zn. We will present the results of ZnSiP 2 film growth on (100) Si substrates. The composition, structure, and morphology of these films have been characterized by energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy, X-ray diffraction and transmission electron diffraction, and electron microscopy, respectively. These promising results represent significant advancement towards implementing ZnSiP 2 as a top cell material on Si-based tandem photovoltaics.

14 SOLAR ENERGY↗