Engineering topics
Liu, Z
Publications and source records attributed to Liu, Z.
Rational Design Synthesis and Evaluation of First Generation Inhibitors of the Giardia Lamblia Fructose-1 6-biphosphate Aldolase
Inhibitors of the Giardia lamblia fructose 1,6-bisphosphate aldolase (GlFBPA), which transforms fructose 1,6-bisphosphate (FBP) to dihydroxyacetone phosphate and glyceraldehyde 3-phosphate, were designed based on 3-hydroxy-2-pyridone and 1,2-dihydroxypyridine scaffolds that position two negatively charged tetrahedral groups for interaction with substrate phosphate binding residues, a hydrogen bond donor to the catalytic Asp83, and a Zn{sup 2+} binding group. The inhibition activities for the GlFBPA catalyzed reaction of FBP of the prepared alkyl phosphonate/phosphate substituted 3-hydroxy-2-pyridinones and a dihydroxypyridine were determined. The 3-hydroxy-2-pyridone inhibitor 8 was found to bind to GlFBPA with an affinity (K{sub i} = 14 {micro}M) that is comparable to that of FBP (K{sub m} = 2 {micro}M) or its inert analog TBP (K{sub i} = 1 {micro}M). The X-ray structure of the GlFBPA-inhibitor 8 complex (2.3 {angstrom}) shows that 8 binds to the active site in the manner predicted by in silico docking with the exception of coordination with Zn{sup 2+}. The observed distances and orientation of the pyridone ring O=C-C-OH relative to Zn{sup 2+} are not consistent with a strong interaction. To determine if Zn{sup 2+} coordination occurs in the GlFBPA-inhibitor 8 complex in solution, EXAFS spectra were measured. A four coordinate geometry comprised of the three enzyme histidine ligands and an oxygen atom from the pyridone ring O=C-C-OH was indicated. Analysis of the Zn{sup 2+} coordination geometries in recently reported structures of class II FBPAs suggests that strong Zn{sup 2+} coordination is reserved for the enediolate-like transition state, accounting for minimal contribution of Zn{sup 2+} coordination to binding of 8 to GlFBPA.
Pressure-Induced Local Structure Distortions in Cu(pyz)F(2)(H(2)O)(2)
We employed infrared spectroscopy along with complementary lattice dynamics and spin density calculations to investigate pressure-driven local structure distortions in the copper coordination polymer Cu(pyz)F{sub 2}(H{sub 2}O){sub 2}. Here, pyz is pyrazine. Our study reveals rich and fully reversible local lattice distortions that buckle the pyrazine ring, disrupt the bc-plane O-H {hor_ellipsis} F hydrogen-bonding network, and reinforce magnetic property switching. The resiliency of the soft organic ring is a major factor in the stability of this material. Interestingly, the collective character of the lattice vibrations masks direct information on the Cu-N and Cu-O linkages through the series of pressure-induced Jahn-Teller axis switching transitions, although Cu-F bond softening is clearly identified above 3 GPa. These findings illustrate the importance of combined bulk and local probe techniques for microscopic structure determination in complex materials.
Pressure- and Heat-Induced Insertion of CO2 into an Auxetic Small-Pore Zeolite
When the small-pore zeolite natrolite is compressed at ca. 1.5 GPa and heated to ca. 110 C in the presence of CO{sub 2}, the unit cell volume of natrolite expands by 6.8% and ca. 12 wt % of CO{sub 2} is contained in the expanded elliptical channels. This CO{sub 2} insertion into natrolite is found to be reversible upon pressure release.
The Study of Structural Transition of ZnS Nanorods under High Pressure
The study of pressure behavior for ZnS nanorods by X-ray diffraction measurements up to 37.2 GPa is carried out. ZnS nanorods transform from the initial wurtzite phase to rock salt phase at 19.6 GPa without undergoing the transition to zinc blende structure, and this is the first report about the direct phase transition from wurtzite to rock salt phase for ZnS. The longitudinal c-axis of ZnS nanorods exhibits more compressible behavior than that of radial a-axis direction, which is caused by the special rod morphology, and this induces the special direct phase transition to rock salt phase without zinc blende phase in the transition process. The results show the morphology of ZnS nanorods plays a crucial role in the special pressure behavior and also suggests we could explore the various pressure behaviors applying particular shaped nanomaterials under high pressure.
Convert Graphene Sheets to Boron Nitride and Boron Nitride-carbon Sheets via a Carbon-substitution Reaction
Here we discuss our synthesis of highly crystalline pure boron nitride (BN) and BN-carbon (BN-C) sheets by using graphene sheets as templates via a carbon-substitution reaction. Typically, these sheets are several micrometers wide and have a few layers. The composition ratios of BN-C sheets can be controlled by the post-treatment (remove carbon by oxidation) temperature. We also observed pure BN and BN-C nanoribbons. We characterized the BN-C sheets via Raman spectroscopy and density functional theory calculations. The results reveal that BN-C sheets with an armchair C-BN chain, and embedded C2 or C6 units in BN-dominated regions energetically are the most favorable.
High-pressure Study of Silane to 150 GPa
We present an extensive study of the optical, electronic, and structural properties of silane (SiH{sub 4}) to 150 GPa through the use of Raman spectroscopy, optical microscopy, synchrotron infrared reflectivity, optical absorption, and synchrotron x-ray diffraction measurements. To mitigate possible contamination from previously reported metal hydride formation, we performed experiments using gold-lined sample gaskets, finding molecular silane remains in the transparent and insulating P2{sub 1}/c structure until {approx}40 GPa. Silane shows a partial loss of crystallinity above {approx}50 GPa and appears to visibly darken. The darkening is plausibly the result of a loss of molecular character with many enthalpically competitive pathways available, including decomposition, combined with the absorptive nature of the sample. Above 100 GPa we observed crystallization into structures partially consistent with the previously reported nonmolecular I4{sup -} 2d and I4{sub 1}/a types. In the absence of decomposition, silane remains partially transparent and nonmetallic to at least 150 GPa with a band gap constrained between 0.6 and 1.8 eV. Under pressure, silane is sensitive to irradiation from x-rays and lasers, and may easily decompose into metallic silicon. We suggest that previous reports of metallization starting from molecular SiH{sub 4} arise from decomposition, and superconductivity may originate from hydrogen-doped silicon. While silane may readily decompose, the inherent metastability provides access to a wide range of path- and sample-history-dependent states and suggests a unique range of physical properties for hydrogen-rich silicon alloys.
High-pressure Structural Stability of Multiferroic Hexagonal RMnO3 (R=Y Ho Lu)
Structural changes in RMnO{sub 3} (R = Y, Ho, Lu) under high pressure were examined by synchrotron x-ray diffraction methods at room temperature. Compression occurs more readily in the ab plane than along the c axis. With increased pressure, a pressure-induced hexagonal to orthorhombic phase transition was observed starting at {approx}22 GPa for Lu(Y)MnO{sub 3}. When the pressure is increased to 35 GPa, a small volume fraction of Lu(Y)MnO{sub 3} is converted to the orthorhombic phase and the orthorhombic phase is maintained on pressure release. High-pressure infrared absorption spectroscopy and Mn K-edge near-edge x-ray absorption spectroscopy confirm that the hexagonal P6{sub 3}cm structure is stable below {approx}20 GPa and the environment around the Mn ion is not changed. Shifts in the unoccupied p-band density of states with pressure are observed in the Mn K-edge spectra. A schematic pressure-temperature phase diagram is given for the small ion RMnO{sub 3} system.
Effect of Enantiomeric Excess on the Phase Behavior of Antiferroelectric Liquid Crystals
Null transmission ellipsometry and resonant x-ray diffraction are employed to study the effect of enantiomeric excess (EE) on the phase behavior of antiferroelectric liquid crystal 10OTBBB1M7. Phase sequence, layer spacing, and pitch of the helical structures of the smectic-C*{sub {alpha}} and smectic-C* phases are studied as a function of temperature and EE. Upon reducing EE, a liquid-gas-type critical point of the smectic-C*{sub {alpha}} to smectic-C* transition is observed, as well as the disappearance of the smectic-C*{sub d4} and the smectic-C*{sub d3} phases. Results are analyzed in a mean-field model.
Observation of Anomalous Phonons in Orthorhombic Rare-earth Manganites
We observe the appearance of a phonon near the lock-in temperature in orthorhombic REMnO{sub 3} (RE denotes rare earth) (RE: Lu and Ho) and anomalous phonon hardening in orthorhombic LuMnO{sub 3}. The anomalous phonon occurs at the onset of spontaneous polarization. No such changes were found in incommensurate orthorhombic DyMnO{sub 3}. These observations directly reveal different electric polarization mechanisms in the E-type and incommensurate-type orthorhombic REMnO{sub 3}.
A far- and Mid-infrared Study of HMX (octahydro-1 3 5 7-tetranitro-1 3 5 7-terazocine) Under High Pressure
We report two separate synchrotron FTIR measurements of the high explosive HMX at ambient temperature and static high pressure in the far- (100-500 wavenumbers) and mid- (500-3200 wavenumbers) infrared (IR) regions up to 30 GPa. The sample for the far-IR experiment was loaded with no pressure-transmitting medium and the sample for the mid-IR study utilized a KBr pressurizing medium. Two possible phase transitions from beta-HMX at ambient conditions were observed near 5 and 12 GPa (likely into the epsilon phase). A phase transition was observed near 25 GPa probably into the delta phase. Pressure cycling in both experiments found no irreversible damage within this pressure range.
Effect of H2O on Upper Mantle Phase Transitions in MgSiO3: is the Seismic X-discontinuity an Indicator of Mantle Water Content
The mantle X-discontinuity, usually assigned to positive seismic velocity reflectors in the 260-330 km depth range, has proved difficult to explain in terms of a single mineralogical phase transformation in part because of its depth variability. The coesite to stishovite transition of SiO{sub 2} matches deeper X-discontinuity depths but requires 5-10% free silica in the mantle to match observed impedance contrast. The orthoenstatite (OEn) to high-pressure clinoenstatite (HPCen) transformation of MgSiO{sub 3} also broadly coincides with depths of the X but requires chemically depleted and orthoenstatite-rich lithology at 300 km depth in order to match observed seismic impedance contrast. On the basis of high-pressure infrared spectroscopy, X-ray diffraction, and Raman spectroscopy, we show that 1300 ppm variation of H{sub 2}O content in MgSiO{sub 3} can displace the transition of low-pressure clinoenstatite (LPCen) to HPCen by up to 2 GPa, similar to previous quench experiments on the OEn to HPCen phase transition, where about 30-45 km (1.0-1.5 GPa) of deflection could occur per 0.1 wt% H{sub 2}O. If the mantle X-discontinuity results from pyroxene transitions in a depleted harzburgite layer, because of the strong influence of minor amounts of water on the transformation boundary, the depth of the mantle X-discontinuity could serve as a potentially sensitive indicator of water content in the uppermantle.
Spectroscopic Study of the Effects of Pressure Media on High-Pressure Phase Transitions in Natrolite
Structural phase transitions in natrolite have been investigated as a function of pressure and different hydrostatic media using micro-Raman scattering and synchrotron infrared (IR) spectroscopy. Natrolite undergoes two reversible phase transitions at 0.86 and 1.53 GPa under pure water pressure medium. These phase transitions are characterized by the changes in the vibrational frequencies of four- and eight-membered rings related to the variations in the bridging T-O-T angles and the geometry of the elliptical eight-ring channels under pressure. Concomitant to the changes in the framework vibrational modes, the number of the O-H stretching vibrational modes of natrolite changes as a result of the rearrangements of the hydrogen bonds in the channels caused by a successive increase in the hydration level under hydrostatic pressure. Similar phase transitions were also observed at relatively higher pressures (1.13 and 1.59 GPa) under alcohol-water pressure medium. Furthermore, no phase transition was found up to 2.52 GPa if a lower volume ratio of the alcohol-water to natrolite was employed. This indicates that the water content in the pressure media plays a crucial role in triggering the pressure-induced phase transitions in natrolite. In addition, the average of the mode Grueneisen parameters is calculated to be about 0.6, while the thermodynamic Grueneisen parameter is found to be 1.33. This might be attributed to the contrast in the rigidity between the TO{sub 4} tetrahedral primary building units and other flexible secondary building units in the natrolite framework upon compression and subsequent water insertion.
Phlogopite and Quartz Lamellae in Diamond-bearing Diopside from Marbles of the Kokchetav Massif Kazakhstan: Exsolution or Replacement Reaction
Exsolution lamellae of pyroxene in garnet (grt), coesite in titanite and omphacite from UHPM terranes are widely accepted as products of decompression. However, interpretation of oriented lamellae of phyllosilicates, framework silicates and oxides as a product of decompression of pyroxene is very often under debate. Results are presented here of FIB-TEM, FEG-EMP and synchrotron-assisted infrared (IR) spectroscopy studies of phlogopite (Phlog) and phlogopite + quartz (Qtz) lamellae in diamond-bearing clinopyroxene (Cpx) from ultra-high pressure (UHP) marble. These techniques allowed collection of three-dimensional information from the grain boundaries of both the single (phlogopite), two-phase lamellae (phlogopite + quartz), and fluid inclusions inside of diamond included in K-rich Cpx and understanding their relationships and mechanisms of formation. The Cpx grains contain in their cores lamellae-I, which are represented by topotactically oriented extremely thin lamellae of phlogopite (that generally are two units cell wide but locally can be seen to be somewhat broader) and microdiamond. The core composition is: (Ca{sub 0.94}K{sub 0.04}Na{sub 0.02})(Al{sub 0.06}Fe{sub 0.08}Mg{sub 0.88})(Si{sub 1.98}Al{sub 0.02})O{sub 6.00}. Fluid inclusions rich in K and Si are recognized in the core of the Cpx, having no visible connections to the lamellae-I. Lamellar-II inclusions consist of micron-size single laths of phlogopite and lens-like quartz or slightly elongated phlogopite + quartz intergrowths; all are situated in the rim zone of the Cpx. The composition of the rim is (Ca{sub 0.95}Fe{sub 0.03}Na{sub 0.02})(Al{sub 0.05}Fe{sub 0.05}Mg{sub 0.90})Si{sub 2}O{sub 6}, and the rim contains more Ca, Mg than the core, with no K there. Such chemical tests support our microstructural observations and conclusion that the phlogopite lamellae-I are exsolved from the K-rich Cpx-precursor during decompression. It is assumed that Cpx-precursor was also enriched in H{sub 2}O, because diamond included in the core of this Cpx contains fluid inclusions. The synchrotron IR spectra of such diamond record the presence of OH{sup -} stretching and H{sub 2}O bending motion regions. Lamellar-II inclusions are interpreted as forming partly because of modification of the lamellae-i in the presence of fluid enriched in K, Fe and Si during deformation of the host diopside; the latter is probably related to the shallower stage of exhumation of the UHP marble. This study emphasizes that in each case to understand the mechanism of lamellar inclusion formation more detailed studies are needed combining both compositional, structural and three-dimensional textural features of lamellar inclusions and their host.
Performance of a Drift Chamber Candidate for a Cosmic Muon Tomography System
In the last decade, many groups around the world have been exploring different ways to probe transport containers which may contain illicit Special Nuclear Materials such as uranium. The muon tomography technique has been proposed as a cost effective system with an acceptable accuracy. A group of Canadian institutions (see above), funded by Defence Research and Development Canada, is testing different technologies to track the cosmic muons. One candidate is the single wire Drift Chamber. With the capability of a 2D impact position measurement, two detectors will be placed above and two below the object to be probed. In order to achieve a good 3D image quality of the cargo content, a good angular resolution is required. The simulation showed that 1mrad was required implying the spatial resolution of the trackers must be in the range of 1 to 2 mm for 1 m separation. A tracking system using three prototypes has been built and tested. The spatial resolution obtained is 1.7 mm perpendicular to the wire and 3 mm along the wire.
Nuclear structure studies along the proton dripline at ATLAS
Nuclei far from the line of stability are a focal point of contemporary nuclear physics. Nuclear structure studies along the proton dripline remain an important component of the scientific program at the ATLAS facility. The Gammasphere gamma-ray array and the Fragment Mass Analyzer offer the unprecedented sensitivity and selectivity required to study nuclei at and beyond the proton dripline. Recent results in proton decay studies, in-beam {gamma}-ray spectroscopy around {sup 100}Sn and studies of proton resonances in light nuclei involved in the astrophysical hydrogen burning are presented. Future prospects in the context of planned and on-going upgrades of ATLAS and experimental apparatus are also briefly discussed.