Search NASA⌕ Search

Engineering topics

Liu, Z

Publications and source records attributed to Liu, Z.

At least 91 records · Page 5

Phase stability of some actinides with brannerite structure at high pressures

Structure behavior of actinide brannerites ThTi{sub 2}O{sub 6}, Y{sub 0.5}U{sub 0.5}Ti{sub 1.5}Nb{sub 0.5}O{sub 6} and their analog oxide CeTi{sub 2}O{sub 6} was studied at high pressure by using in situ x-ray diffraction, Raman scattering and infra-red absorption techniques, respectively. Brannerite structure was found to be not stable and started to become amorphous at pressures above 20 GPa. Some minor crystalline phase(s) due to phase decomposition was observed in all the three samples during pressurization. In addition, the observed bulk modulus indicated that the actinide-bearing brannerites are more compressible than their analog compound CeTi{sub 2}O{sub 6}, which may be related to the asymmetric 5f electron orbits of actinide elements. - Graphical abstract: Actinide-bearing compounds with brannerite structure and their analog CeTi{sub 2}O{sub 6} are not stable at high pressure. They were amorphized after {approx}20 GPa and a minor pressure-induced phase transition or decomposition process was always observed before amorphization. Highlights: > Phase stability of three brannerites CeTi{sub 2}O{sub 6}, ThTi{sub 2}O{sub 6}, and (U,Y)(Ti,Nb){sub 2}O{sub 6} at high pressures. > Brannerite structure was not stable and became amorphous after {approx}20 GPa. > Actinide-bearing brannerites are easier compressed than their analog compound CeTi{sub 2}O{sub 6}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication and characterization of SmO{<_0.7}F{<_2}FeAs bulk with a transition temperature of 56.5K.

The superconductivity of iron-based superconductor SmO{sub 0.7}F{sub 0.2}FeAs was investigated. The SmO{sub 0.7}F{sub 0.2}FeAs sample was prepared by the two-step solid-state reaction method. The onset resistivity transition temperature is as high as 56.5 K. X-ray diffraction (XRD) results show that the lattice parameters a and c are 0.39261 and 0.84751 nm, respectively. Furthermore, the global J{sub c} was more than 2.3 x 10{sup 5} A/cm2 at T = 10 K and H = 9 T, which was calculated by the formula of J{sub c} = 20 {Delta} M/[a(1 - a/(3b))]. The upper critical fields, H{sub c2} {approx} 256 T (T = 0 K), was determined according to the Werthamer-Helfand-Hohenberg formula, indicating that the SmO{sub 0.7}F{sub 0.2}FeAs was a superconductor with a very promising application.

36 MATERIALS SCIENCE↗

The suitability of large area drift chambers as the technology choice for the Cosmic Ray Inspection and Passive Tomography (CRIPT) project

The CRIPT project brings together several Canadian institutions, concerned with the detection of Special Nuclear Materials (SNM), addressing a requirement at ports-of-entry for detection of SNM in the many thousands of containers that flow into and out of Canada every day, while at the same time providing a way of monitoring the contents of nuclear waste storage containers, for waste management and non-proliferation reasons. The scale of these applications is large - typically tens of cubic metres, requiring detectors that can cover a large area at a minimum cost. The CRIPT project considered drift chambers adapted from high energy physics experience, as one of its technology choices. We report here on the performance of a full scale prototype, which covers an area of 2.4 m x 1.2 m with only 6 readout channels, and provides a 2D data point with accuracies (in x and z) of around 2 mm. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High-pressure structural stability of multiferroic hexagonal RMnO3 (R=Y, Ho, Lu)

Structural changes in RMnO{sub 3} (R= Y, Ho, Lu) under high pressure were examined by synchrotron x-ray diffraction methods at room temperature. Compression occurs more readily in the ab plane than along the c axis. With increased pressure, a pressure-induced hexagonal to orthorhombic phase transition was observed starting at {approx}22 GPa for Lu(Y)MnO{sub 3}. When the pressure is increased to 35 GPa, a small volume fraction of Lu(Y)MnO{sub 3} is converted to the orthorhombic phase and the orthorhombic phase is maintained on pressure release. High-pressure infrared absorption spectroscopy and Mn K-edge near-edge x-ray absorption spectroscopy confirm that the hexagonal P6{sub 3}cm structure is stable below {approx}20 GPa and the environment around the Mn ion is not changed. Shifts in the unoccupied p-band density of states with pressure are observed in the Mn K-edge spectra. A schematic pressure-temperature phase diagram is given for the small ion RMnO{sub 3} system.

36 MATERIALS SCIENCE↗

Renormalization of quark propagators from twisted-mass lattice QCD at N{sub f}=2

We present results concerning the nonperturbative evaluation of the renormalization constant for the quark field, Z{sub q}, from lattice simulations with twisted-mass quarks and three values of the lattice spacing. We use the regularization-invariant momentum-subtraction (RI'-MOM) scheme. Z{sub q} has very large lattice spacing artefacts; it is considered here as a test bed to elaborate accurate methods which will be used for other renormalization constants. We recall and develop the nonperturbative correction methods and propose tools to test the quality of the correction. These tests are also applied to the perturbative correction method. We check that the lattice-spacing artefacts indeed scale as a{sup 2}p{sup 2}. We then study the running of Z{sub q} with particular attention to the nonperturbative effects, presumably dominated by the dimension-two gluon condensate <A{sup 2}> in Landau gauge. We show indeed that this effect is present, and not small. We check its scaling in physical units, confirming that it is a continuum effect. It gives a {approx}4% contribution at 2 GeV. Different variants are used in order to test the reliability of our result and estimate the systematic uncertainties. Finally, combining all our results and using the known Wilson coefficient of <A{sup 2}>, we find g{sup 2}({mu}{sup 2})<A{sup 2}>{sub {mu}}{sup 2}{sub CM}=2.01(11)({sub -0.73}{sup +0.61})GeV{sup 2} at {mu}=10 GeV, the local operator A{sup 2} being renormalized in the MS scheme. This last result is in fair agreement within uncertainties with the value independently extracted from the strong coupling constant. We convert the nonperturbative part of Z{sub q} from the regularization-invariant momentum-subtraction (RI'-MOM) scheme to MS. Our result for the quark field renormalization constant in the MS scheme is Z{sub q} {sup MS} {sup pert}((2 GeV){sup 2},g{sub bare}{sup 2})=0.750(3)(7)-0.313(20)(g{sub bare}{sup 2}-1.5) for the perturbative contribution and Z{sub q}{sup MSnonperturbative}((2 GeV){sup 2},g{sub bare}{sup 2})=0.781(6)(21)-0.313(20)(g{sub bare}{sup 2}-1.5) when the nonperturbative contribution is included.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Diffusion Coefficients in Liquid and Grain Boundary Predicted by Ab Initio Molecular Dynamics

Molecular dynamics (MD) is a powerful tool to probe the thermodynamic and kinetic properties of solid, glass and liquid phases. In classical molecular dynamics (CMD), empirical models are used to describe the force by considering bond, bend and dihedral angle contributions with parameters fitted to experimental data or first-principles calculations of small clusters. In the ab initio molecular dynamics (AIMD), the forces are calculated on the fly using the first-principles density functional theory as discussed above. In the present work, we use AIMD simulations to follow the random walk of atoms in the liquid state. Based on the mean square displacements (MSD), the diffusion coefficients are calculated from the Einstein equation. Furthermore, we extend this approach to understand the diffusion in grain boundaries.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cross-polarization confocal imaging of subsurface flaws in silicon nitride.

A cross-polarization confocal microscopy (CPCM) method was developed to image subsurface flaws in optically translucent silicon nitride (Si{sub 3}N{sub 4}) ceramics. Unlike conventional confocal microscopy, which measures reflected light so is applicable only to transparent and semi-transparent materials, CPCM detects scattered light from subsurface while filtering out the reflected light from ceramic surface. For subsurface imaging, the refractive-index mismatch between imaging (air) and imaged (ceramic) medium may cause image distortion and reduce resolution in the depth direction. This effect, characterized by an axial scaling factor (ASF), was analyzed and experimentally determined for glass and Si{sub 3}N{sub 4} materials. The experimental CPCM system was used to image Hertzian C-cracks generated by various indentation loads in the subsurface of a Si{sub 3}N{sub 4} specimen. It was demonstrated that CPCM may provide detailed information of subsurface cracks, such as crack angle and path, and subsurface microstructural variations.

36 MATERIALS SCIENCE↗

Conversion of D-ribulose 5-phosphate to D-xylulose 5-phosphate : new insights from structural and biochemical studies on human RPE.

The pentose phosphate pathway (PPP) confers protection against oxidative stress by supplying NADPH necessary for the regeneration of glutathione, which detoxifies H{sub 2}O{sub 2} into H{sub 2}O and O{sub 2}. RPE functions in the PPP, catalyzing the reversible conversion of D-ribulose 5-phosphate to D-xylulose 5-phosphate and is an important enzyme for cellular response against oxidative stress. Here, using structural, biochemical, and functional studies, we show that human D-ribulose 5-phosphate 3-epimerase (hRPE) uses Fe{sup 2+} for catalysis. Structures of the binary complexes of hRPE with D-ribulose 5-phosphate and D-xylulose 5-phosphate provide the first detailed molecular insights into the binding mode of physiological ligands and reveal an octahedrally coordinated Fe{sup 2+} ion buried deep inside the active site. Human RPE folds into a typical ({beta}/{alpha}){sub 8} triosephosphate isomerase (TIM) barrel with a loop regulating access to the active site. Two aspartic acids are well positioned to carry out the proton transfers in an acid-base type of reaction mechanism. Interestingly, mutating Ser-10 to alanine almost abolished the enzymatic activity, while L12A and M72A mutations resulted in an almost 50% decrease in the activity. The binary complexes of hRPE reported here will aid in the design of small molecules for modulating the activity of the enzyme and altering flux through the PPP.

59 BASIC BIOLOGICAL SCIENCES↗

Graphene Modified LiFePO4 Cathode Materials for High Power Lithium ion Batteries

Graphene-modified LiFePO{sub 4} composite has been developed as a Li-ion battery cathode material with excellent high-rate capability and cycling stability. The composite was prepared with LiFePO{sub 4} nanoparticles and graphene oxide nanosheets by spray-drying and annealing processes. The LiFePO{sub 4} primary nanoparticles embedded in micro-sized spherical secondary particles were wrapped homogeneously and loosely with a graphene 3D network. Such a special nanostructure facilitated electron migration throughout the secondary particles, while the presence of abundant voids between the LiFePO{sub 4} nanoparticles and graphene sheets was beneficial for Li{sup +} diffusion. The composite cathode material could deliver a capacity of 70 mAh g{sup -1} at 60C discharge rate and showed a capacity decay rate of <15% when cycled under 10C charging and 20C discharging for 1000 times.

74 ATOMIC AND MOLECULAR PHYSICS↗

The effects of diesel injector needle motion on spray structure.

The internal structure of diesel fuel injectors is known to have a significant impact on the steady-state fuel distribution within the spray. However, little experimental or computational work has been performed on the dynamics of fuel injectors. Recent studies have shown that it is possible to measure the three-dimensional geometry of the injector nozzle, and to track changes in that geometry as the needle opens and closes in real time. This has enabled the dynamics of the injector to be compared with the dynamics of the spray, and allows computational fluid dynamics (CFD) simulations to use realistic time-dependent flow passage geometries. In this study, X-ray phase-enhanced imaging has been used to perform time-resolved imaging of the needle seat area in several common-rail diesel injection nozzles. The fuel distributions of the sprays emitted by these injectors were also studied with fast X-ray radiography. Correlations between eccentric motions of the injector needle valve and oscillations in the fuel density as it emerges from the nozzle are examined. CFD modeling is used to interpret the effect of needle motion on fuel flow.

33 ADVANCED PROPULSION SYSTEMS↗

Pressure-induced bonding and compound formation in xenon-hydrogen solids

Closed electron shell systems, such as hydrogen, nitrogen or group 18 elements, can form weakly bound stoichiometric compounds at high pressures. An understanding of the stability of these van der Waals compounds is lacking, as is information on the nature of their interatomic interactions. We describe the formation of a stable compound in the Xe-H{sub 2} binary system, revealed by a suite of X-ray diffraction and optical spectroscopy measurements. At 4.8 GPa, a unique hydrogen-rich structure forms that can be viewed as a tripled solid hydrogen lattice modulated by layers of xenon, consisting of xenon dimers. Varying the applied pressure tunes the Xe-Xe distances in the solid over a broad range from that of an expanded xenon lattice to the distances observed in metallic xenon at megabar pressures. Infrared and Raman spectra indicate a weakening of the intramolecular covalent bond as well as persistence of semiconducting behaviour in the compound to at least 255 GPa.

08 HYDROGEN↗

Magnetic ordering in tetragonal FeS: Evidence for strong itinerant spin fluctuations

Mackinawite is a naturally occurring layer-type FeS mineral important in biogeochemical cycles and, more recently, in the development of microbial fuel cells. Conflicting results have been published as to the magnetic properties of this mineral, with Moessbauer spectroscopy indicating no magnetic ordering down to 4.2 K but density functional theory (DFT) predicting an antiferromagnetic ground state, similar to the Fe-based high-temperature superconductors with which it is isostructural and for which it is known that magnetism is suppressed by strong itinerant spin fluctuations. We investigated this latter possibility for mackinawite using photoemission spectroscopy, near-edge x-ray absorption fine structure spectroscopy, and DFT computations. Our Fe 3{sub s} core-level photoemission spectrum of mackinawite showed a clear exchange-energy splitting (2.9 eV) consistent with a 1 {micro}{sub B} magnetic moment on the Fe ions, while the Fe L-edge x-ray absorption spectrum indicated rather delocalized Fe 3{sub d} electrons in mackinawite similar to those in Fe metal. Our DFT computations demonstrated that the ground state of mackinawite is single-stripe antiferromagnetic, with an Fe magnetic moment (2.7 {micro}{sub B}) that is significantly larger than the experimental estimate and has a strong dependence on the S height and lattice parameters. All of these trends signal the existence of strong itinerant spin fluctuations. If spin fluctuations prove to be mediators of electron pairing, we conjecture that mackinawite may be one of the simplest Fe-based superconductors.

30 DIRECT ENERGY CONVERSION↗

Effect of H2O on Upper Phase Transitions in MgSiO3: Is the Depth of the Seismic X-Discontinuity an Indicator of Mangle Water Content?

The mantle X-discontinuity, usually assigned to positive seismic velocity reflectors in the 260-330 km depth range, has proved difficult to explain in terms of a single mineralogical phase transformation in part because of its depth variability. The coesite to stishovite transition of SiO{sub 2} matches deeper X-discontinuity depths but requires 5-10% free silica in the mantle to match observed impedance contrast. The orthoenstatite (OEn) to high-pressure clinoenstatite (HPCen) transformation of MgSiO{sub 3} also broadly coincides with depths of the X but requires chemically depleted and orthoenstatite-rich lithology at 300 km depth in order to match observed seismic impedance contrast. On the basis of high-pressure infrared spectroscopy, X-ray diffraction, and Raman spectroscopy, we show that 1300 ppm variation of H{sub 2}O content in MgSiO{sub 3} can displace the transition of low-pressure clinoenstatite (LPCen) to HPCen by up to 2 GPa, similar to previous quench experiments on the OEn to HPCen phase transition, where about 30-45 km (1.0-1.5 GPa) of deflection could occur per 0.1 wt% H{sub 2}O. If the mantle X-discontinuity results from pyroxene transitions in a depleted harzburgite layer, because of the strong influence of minor amounts of water on the transformation boundary, the depth of the mantle X-discontinuity could serve as a potentially sensitive indicator of water content in the upper mantle.

58 GEOSCIENCES↗

Spectroscopy of neutron-rich {sup 168,170}Dy: Yrast band evolution close to the N{sub p}N{sub n} valence maximum

The yrast sequence of the neutron-rich dysprosium isotope {sup 168}Dy has been studied using multinucleon transfer reactions following collisions between a 460-MeV {sup 82}Se beam and an {sup 170}Er target. The reaction products were identified using the PRISMA magnetic spectrometer and the gamma rays detected using the CLARA HPGe-detector array. The 2{sup +} and 4{sup +} members of the previously measured ground-state rotational band of {sup 168}Dy have been confirmed and the yrast band extended up to 10{sup +}. A tentative candidate for the 4{sup +}->2{sup +} transition in {sup 170}Dy was also identified. The data on these nuclei and on the lighter even-even dysprosium isotopes are interpreted in terms of total Routhian surface calculations and the evolution of collectivity in the vicinity of the proton-neutron valence product maximum is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Potentiometric Sensors Based on Surface Molecular Imprinting: Detection of Cancer Biomarkers and Viruses

The continuing discovery of cancer biomarkers necessitates improved methods for their detection. Molecular imprinting using artificial materials provides an alternative to the detection of a wide range of substances. We applied surface molecular imprinting using self-assembled monolayers to design sensing elements for the detection of cancer biomarkers and other proteins. These elements consist of a gold-coated silicon chip onto which hydroxyl-terminated alkanethiol molecules and template biomolecule are co-adsorbed, where the thiol molecules are chemically bound to the metal substrate and self-assembled into highly ordered monolayers, the biomolecules can be removed, creating the foot-print cavities in the monolayer matrix for this kind of template molecules. Re-adsorption of the biomolecules to the sensing chip changes its potential, which can be measured potentiometrically. We applied this method to the detection of carcinoembryonic antigen (CEA) in both solutions of purified CEA and in the culture medium of a CEA-producing human colon cancer cell line. The CEA assay, validated also against a standard immunoassay, was both sensitive (detection range 2.5-250 ng/mL) and specific (no cross-reactivity with hemoglobin; no response by a non-imprinted sensor). Similar results were obtained for human amylase. In addition, we detected virions of poliovirus in a specific manner (no cross-reactivity to adenovirus, no response by a non-imprinted sensor). Our findings demonstrate the application of the principles of molecular imprinting to the development of a new method for the detection of protein cancer biomarkers and to protein-based macromolecular structures such as the capsid of a virion. This approach has the potential of generating a general assay methodology that could be highly sensitive, specific, simple and likely inexpensive.

59 BASIC BIOLOGICAL SCIENCES↗

Synchrotron X-ray Diffraction and Infrared Spectroscopy Studies of C60H18 Under High Pressure

In situ high-pressure angle-dispersive synchrotron X-ray diffraction and high-pressure mid-infrared (IR) spectrum measurements of C{sub 60}H{sub 18} were carried out up to 32 and 10.2 GPa, respectively. Our diffraction data indicated that the fcc structure of C{sub 60}H{sub 18} was stable up to 32 GPa. The bulk modulus B{sub 0} was determined to be 21 {+-} 1.16 GPa, about 40% higher than that of C{sub 60}. The C-H vibrations still existed up to 10.2 GPa, and the vibrational frequencies decreased with increasing pressure. IR-active vibrational frequencies and their corresponding eigenvectors of C{sub 60}H{sub 18} were simulated by DMOL{sup 3}. The effects of the hydrogen atoms attached to the fullerene molecular cage on the stability of the structure under high pressure are discussed.

08 HYDROGEN↗