Search NASA⌕ Search

Engineering topics

Lu, Xing

Publications and source records attributed to Lu, Xing.

27 records · Page 2

The Molecular Gas Environment in the 20 km s{sup −1} Cloud in the Central Molecular Zone

We recently reported a population of protostellar candidates in the 20 km s{sup −1} cloud in the Central Molecular Zone of the Milky Way, traced by H{sub 2}O masers in gravitationally bound dense cores. In this paper, we report molecular line studies with high angular resolution (∼3″) of the environment of star formation in this cloud. Maps of various molecular line transitions as well as the continuum at 1.3 mm are obtained using the Submillimeter Array. Five NH{sub 3} inversion lines and the 1.3 cm continuum are observed with the Karl G. Jansky Very Large Array. The interferometric observations are complemented with single-dish data. We find that the CH{sub 3}OH, SO, and HNCO lines, which are usually shock tracers, are better correlated spatially with the compact dust emission from dense cores among the detected lines. These lines also show enhancement in intensities with respect to SiO intensities toward the compact dust emission, suggesting the presence of slow shocks or hot cores in these regions. We find gas temperatures of ≳100 K at 0.1 pc scales based on RADEX modeling of the H{sub 2}CO and NH{sub 3} lines. Although no strong correlations between temperatures and linewidths/H{sub 2}O maser luminosities are found, in high-angular-resolution maps we note several candidate shock-heated regions offset from any dense cores, as well as signatures of localized heating by protostars in several dense cores. Our findings suggest that at 0.1 pc scales in this cloud star formation and strong turbulence may together affect the chemistry and temperature of the molecular gas.

79 ASTRONOMY AND ASTROPHYSICS↗

DEEPLY EMBEDDED PROTOSTELLAR POPULATION IN THE 20 km s{sup −1} CLOUD OF THE CENTRAL MOLECULAR ZONE

We report the discovery of a population of deeply embedded protostellar candidates in the 20 km s{sup −1} cloud, one of the massive molecular clouds in the Central Molecular Zone (CMZ) of the Milky Way, using interferometric submillimeter continuum and H{sub 2}O maser observations. The submillimeter continuum emission shows five 1 pc scale clumps, each of which further fragments into several 0.1 pc scale cores. We identify 17 dense cores, among which 12 are gravitationally bound. Among the 18 H{sub 2}O masers detected, 13 coincide with the cores and probably trace outflows emanating from the protostars. There are also 5 gravitationally bound dense cores without H{sub 2}O maser detection. In total, the 13 masers and 5 cores may represent 18 protostars with spectral types later than B1 or potentially growing more massive stars at earlier evolutionary stages, given the non-detection in the centimeter radio continuum. In combination with previous studies of CH{sub 3}OH masers, we conclude that the star formation in this cloud is at an early evolutionary phase, before the presence of any significant ionizing or heating sources. Our findings indicate that star formation in this cloud may be triggered by a tidal compression as it approaches pericenter, similar to the case of G0.253+0.016 but with a higher star formation rate, and demonstrate that high angular resolution, high-sensitivity maser, and submillimeter observations are promising techniques to unveil deeply embedded star formation in the CMZ.

79 ASTRONOMY AND ASTROPHYSICS↗

INITIAL FRAGMENTATION IN THE INFRARED DARK CLOUD G28.53−0.25

To study the fragmentation and gravitational collapse of dense cores in infrared dark clouds (IRDCs), we have obtained submillimeter continuum and spectral line data as well as multiple inversion transitions of NH{sub 3} and H{sub 2}O maser data of four massive clumps in IRDC G28.53−0.25. Combining single-dish and interferometer NH{sub 3} data, we derive a rotation temperature of G28.53. We identity 12 dense cores at a 0.1 pc scale based on submillimeter continuum, and obtain their physical properties using NH{sub 3} and continuum data. By comparing the Jeans masses of cores with the core masses, we find that turbulent pressure is important for supporting the gas when 1 pc scale clumps fragment into 0.1 pc scale cores. All cores have a virial parameter that is smaller than 1 if we assume an inverse squared radial density profile, suggesting they are gravitationally bound, and the three most promising star-forming cores have a virial parameter that is smaller than 1 even when taking the magnetic field into account. We also associate the cores with star formation activities revealed by outflows, masers, or infrared sources. Unlike what previous studies have suggested, MM1 turns out to harbor a few star-forming cores and is likely a progenitor of a high-mass star cluster. MM5 is intermediate while MM7/8 are quiescent in terms of star formation, but they also harbor gravitationally bound dense cores and have the potential for forming stars, as in MM1.

79 ASTRONOMY AND ASTROPHYSICS↗

FRAGMENTATION OF MOLECULAR CLUMPS AND FORMATION OF A PROTOCLUSTER

Sufficiently massive clumps of molecular gas collapse under self-gravity and fragment to spawn a cluster of stars that have a range of masses. We investigate observationally the early stages of formation of a stellar cluster in a massive filamentary infrared dark cloud, G28.34+0.06 P1, in the 1.3 mm continuum and spectral line emission using the Atacama Large Millimeter/Submillimeter Array. Sensitive continuum data reveal further fragmentation in five dusty cores at a resolution of several 10{sup 3} AU. Spectral line emission from C{sup 18}O, CH{sub 3}OH, {sup 13}CS, H{sub 2}CO, and N{sub 2}D{sup +} is detected for the first time toward these dense cores. We found that three cores are chemically more evolved as compared with the other two; interestingly, though, all of them are associated with collimated outflows as suggested by evidence from the CO, SiO, CH{sub 3}OH, H{sub 2}CO, and SO emission. The parsec-scale kinematics in exhibit velocity gradients along the filament, consistent with accretion flows toward the clumps and cores. The moderate luminosity and the chemical signatures indicate that the five cores harbor low- to intermediate-mass protostars that likely become massive ones at the end of the accretion. Despite the fact that the mass limit reached by the dust continuum sensitivity is 30 times lower than the thermal Jeans mass, there is a lack of a distributed low-mass protostellar population in the clump. Our observations indicate that in a protocluster, low-mass stars form at a later stage after the birth of more massive protostars.

79 ASTRONOMY AND ASTROPHYSICS↗

The microstructure and mechanical behaviors of the Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy produced by laser melting deposition

The microstructure and mechanical properties of the Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy produced by laser melting deposition have been investigated. The columnar grains of the Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy due to the layer-by-layer epitaxial growth from the underlying template grains during laser melting deposition, which is roughly parallel to the deposition direction, had been found by optical microscopy; strong [101{sup ¯}2]{sub α} crystallographic texture has been confirmed by X-ray diffraction and electron backscattered diffraction. Depending on the last heating history, the microstructure of the alloy undergoes a continued change opposite to the deposition direction: martensitic α′ (transformed β); coarsened primary α laths with transformed β; coarsened primary α laths; and the fine basketweave microstructure with a few coarsened α laths or annealed martensitic α′. The average Vickers micro-hardness value of the alloy is 364 HV. The alloy parallel to the deposition direction presents lower tensile strength (925 MPa) and better elongation (18.8%), compared with 1025 MPa and 8.2% of that vertical to the deposition direction, which has been discussed using its microstructure characterization. - Highlights: • The columnar grains and strong [101{sup ¯}2]{sub α} crystallographic texture of the Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy due to the epitaxial growth from the underlying template grains • The microstructure evolution of the alloy depends on the last heating history. • The specimen parallel to the deposition direction presents lower ultimate tensile strength and higher elongation than the specimen vertical to the deposition direction.

36 MATERIALS SCIENCE↗

Low trap states in in situ SiN{sub x}/AlN/GaN metal-insulator-semiconductor structures grown by metal-organic chemical vapor deposition

We report the use of SiN{sub x} grown in situ by metal-organic chemical vapor deposition as the gate dielectric for AlN/GaN metal-insulator-semiconductor (MIS) structures. Two kinds of trap states with different time constants were identified and characterized. In particular, the SiN{sub x}/AlN interface exhibits remarkably low trap state densities in the range of 10{sup 11}–10{sup 12 }cm{sup −2}eV{sup −1}. Transmission electron microscopy and X-ray photoelectron spectroscopy analyses revealed that the in situ SiN{sub x} layer can provide excellent passivation without causing chemical degradation to the AlN surface. These results imply the great potential of in situ SiN{sub x} as an effective gate dielectric for AlN/GaN MIS devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Very large array observations of ammonia in high-mass star formation regions

We report systematic mapping observations of the NH{sub 3} (1, 1) and (2, 2) inversion lines toward 62 high-mass star-forming regions using the Very Large Array (VLA) in its D and DnC array configurations. The VLA images cover a spatial dynamic range from 40'' to 3'', allowing us to trace gas kinematics from ∼1 pc scales to ≲0.1 pc scales. Based on the NH{sub 3} morphology and the infrared nebulosity on 1 pc scales, we categorize three subclasses in the sample: filaments, hot cores, and NH{sub 3}-dispersed sources. The ubiquitous gas filaments found on 1 pc scales have a typical width of ∼0.1 pc and often contain regularly spaced fragments along the major axis. The spacing of the fragments and the column densities is consistent with the turbulent supported fragmentation of cylinders. Several sources show multiple filaments that converge toward a center where the velocity field in the filaments is consistent with gas flows. We derive rotational temperature maps for the entire sample. For the three hot core sources, we find a projected radial temperature distribution that is best fit by power-law indices from –0.18 to –0.35. We identify 174 velocity-coherent ∼0.1 pc scale dense cores from the entire sample. The mean physical properties for these cores are 1.1 km s{sup –1} in intrinsic linewidth, 18 K in NH{sub 3} rotational temperature, 2.3 × 10{sup 15} cm{sup –2} in NH{sub 3} gas column density, and 67 M{sub ☉} in molecular mass. The dense cores identified from the filamentary sources are closer to being virialized. Dense cores in the other two categories of sources appear to be dynamically unstable.

79 ASTRONOMY AND ASTROPHYSICS↗

Growth and characterization of horizontal GaN wires on silicon

We report the growth of in-plane GaN wires on silicon by metalorganic chemical vapor deposition. Triangular-shaped GaN microwires with semi-polar sidewalls are observed to grow on top of a GaN/Si template patterned with nano-porous SiO{sub 2}. With a length-to-thickness ratio ∼200, the GaN wires are well aligned along the three equivalent 〈 112{sup ¯}0 〉 directions. Micro-Raman measurements indicate negligible stress and a low defect density inside the wires. Stacking faults were found to be the only defect type in the GaN wire by cross-sectional transmission electron microscopy. The GaN wires exhibited high conductivity, and the resistivity was 20–30 mΩ cm, regardless of the wire thickness. With proper heterostructure and doping design, these highly aligned GaN wires are promising for photonic and electronic applications monolithically integrated on silicon.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗