Engineering topics

Luthcke, Scott B.

Publications and source records attributed to Luthcke, Scott B..

27 records · Page 2

NASA NTRS2001

Precise Orbit Determination for GEOSAT Follow-On Using Satellite Laser Ranging Data and Intermission Altimeter Crossovers

The US Navy's GEOSAT Follow-On Spacecraft was launched on February 10, 1998 with the primary objective of the mission to map the oceans using a radar altimeter. Following an extensive set of calibration campaigns in 1999 and 2000, the US Navy formally accepted delivery of the satellite on November 29, 2000. Satellite laser ranging (SLR) and Doppler (Tranet-style) beacons track the spacecraft. Although limited amounts of GPS data were obtained, the primary mode of tracking remains satellite laser ranging. The GFO altimeter measurements are highly precise, with orbit error the largest component in the error budget. We have tuned the non-conservative force model for GFO and the gravity model using SLR, Doppler and altimeter crossover data sampled over one year. Gravity covariance projections to 70x70 show the radial orbit error on GEOSAT was reduced from 2.6 cm in EGM96 to 1.3 cm with the addition of SLR, GFO/GFO and TOPEX/GFO crossover data. Evaluation of the gravity fields using SLR and crossover data support the covariance projections and also show a dramatic reduction in geographically-correlated error for the tuned fields. In this paper, we report on progress in orbit determination for GFO using GFO/GFO and TOPEX/GFO altimeter crossovers. We will discuss improvements in satellite force modeling and orbit determination strategy, which allows reduction in GFO radial orbit error from 10-15 cm to better than 5 cm.

Lemoine, Frank G.↗

NASA NTRS2000

Gravity and Nonconservative Force Model Tuning for the GEOSAT Follow-On Spacecraft

The US Navy's GEOSAT Follow-On spacecraft was launched on February 10, 1998 and the primary objective of the mission was to map the oceans using a radar altimeter. Three radar altimeter calibration campaigns have been conducted in 1999 and 2000. The spacecraft is tracked by satellite laser ranging (SLR) and Doppler beacons and a limited amount of data have been obtained from the Global Positioning Receiver (GPS) on board the satellite. Even with EGM96, the predicted radial orbit error due to gravity field mismodelling (to 70x70) remains high at 2.61 cm (compared to 0.88 cm for TOPEX). We report on the preliminary gravity model tuning for GFO using SLR, and altimeter crossover data. Preliminary solutions using SLR and GFO/GFO crossover data from CalVal campaigns I and II in June-August 1999, and January-February 2000 have reduced the predicted radial orbit error to 1.9 cm and further reduction will be possible when additional data are added to the solutions. The gravity model tuning has improved principally the low order m-daily terms and has reduced significantly the geographically correlated error present in this satellite orbit. In addition to gravity field mismodelling, the largest contributor to the orbit error is the non-conservative force mismodelling. We report on further nonconservative force model tuning results using available data from over one cycle in beta prime.

Lemoine, Frank G.↗

NASA NTRS1999

Gravity and Macro-Model Tuning for the Geosat Follow-on Spacecraft

The US Navy's GEOSAT Follow-On (GFO) spacecraft was launched on February 10, 1998 and the primary objective of the mission was to map the oceans using a radar altimeter. The spacecraft tracking complement consisted of GPS receivers, a laser retroreflector and Doppler beacons. Since the GPS receivers have not yet returned reliable data, the only means of providing high-quality precise orbits has been though satellite laser ranging (SLR). The spacecraft has been tracked by the international satellite laser ranging network since April 22, 1998, and an average of 7.4 passes per day have been obtained from US and participating foreign stations. Since the predicted radial orbit error due to the gravity field is two to three cm, the largest contributor to the high SLR residuals (7-10 cm RMS for five day arcs) is the mismodelling of the non-conservative forces, not withstanding the development of a three-dimensional eight-panel model and an analytical attitude model for the GFO spacecraft. The SLR residuals show a clear correlation with beta-prime (solar elevation) angle, peaking in mid-August 1998 when the beta-prime angle reached -80 to -90 degrees. In this paper we discuss the tuning of the non-conservative force model, for GFO and report the subsequent addition of the GFO tracking data to the Earth gravity model solutions.

Lemoine, Frank G.↗

NASA NTRS1999

Precise Orbit Determination for the GEOSAT Follow-On Spacecraft

The US Navy's GEOSAT Follow-On spacecraft was launched on February 10, 1998 with its primary mission objective to map the oceans using a radar altimeter. The spacecraft tracking complement consists of GPS receivers, a laser retroreflector and Doppler beacons. Since the GPS receivers have not yet returned reliable data, the only means of providing high-quality precise orbits has been though satellite laser ranging (SLR). SLR has tracked the spacecraft since April 22, 1998, and an average of 7 passes per day have been obtained from US and foreign stations. Since the predicted radial orbit error due to the gravity field is only two to three cm, the largest contributor to the high SLR residuals (10 cm) is the mismodelling of the non-conservative forces. The SLR residuals show a clear correlation with beta prime (solar elevation) angle, peaking in mid-August 1998 when the beta prime angle reached -80 to -90 degrees. We report in this paper on the analysis of the GFO tracking data (SLR, Doppler, and if available GPS) using GEODYN, and on the tuning of the non-conservative force model and the gravity model using these data.

Lemoine, Frank G.↗

NASA NTRS1999

Improvements in Nonconservative Force Modelling for TOPEX/POSEIDON

It was recognized prior to the launch of TOPEX/POSEIDON, that the most important source of orbit error other than the gravity field, was due to nonconservative force modelling. Accordingly, an intensive effort was undertaken to study the nonconservative forces acting on the spacecraft using detailed finite element modelling (Antreasian, 1992; Antreasian and Rosborough, 1992). However, this detailed modelling was not suitable for orbit determination, and a simplified eight plate "box-wing" model was developed that took into account the aggregate effect of the various materials and associated thermal properties of each spacecraft surface. The a priori model was later tuned post launch with actual tracking data [Nerem et al., 1994; Marshall and Luthcke, 1994; Marshall et al., 1995]. More recently, Kubitschek (1997] developed a newer box-wing model for TOPEX/POSEIDON, which included updated material properties, accounted for a solar array deflection, and modelled solar array warping due to thermal effects. We have used this updated model as a basis to retune the macromodel for TOPEX/POSEIDON, and report on preliminary results using at least 36 cycles (one year) of SLR and DORIS data in 1993.

Lemoine, Frank G.↗

NASA NTRS1998

Application of the Shuttle Laser Altimeter in an Accuracy Assessment of Global 1-Kilometer Digital Elevation Data

Shuttle Laser Altimeter (SLA) data have been used to evaluate the accuracy of GTOPO30, the first comprehensive, 1 km resolution, global topographic data set. GTOPO30 was developed by the USGS Eros Data Center (EDC), in part, to address NASA's needs for a global topographic model in support of remote sensing instruments aboard the Earth Observing System AM-1 spacecraft. SLA flew as a part of the STS-72 mission in January, 1996 observing the latitude band from +/- 28.5 deg, and on STS-85 in August, 1997 extending the observations to +/- 57 deg. Combining the SLA ranging data with shuttle position and pointing knowledge yields surface elevation data of very high vertical accuracy in an Earth-centered, absolute reference frame (2.8 m rms difference for SLA-01 with respect to ocean reference surface). Use of the well-determined mean sea surface reference for calibration allows propagation of high accuracy altimetry onto the continents. 436,635 SLA-01 land elevations were compared to the GTOPO30 grid after conversion to a mean sea level vertical datum using the Earth Geoid Model 96, jointly developed by Goddard and NIMA. The comparison reveals systematic elevation biases in southern Asia, Africa, Australia, and south America on the order 10's to 100 meters in the GTOPO30 compilation on spatial scales of 100's to 1000's of kilometers. These biases are likely due to vertical datum errors in the topographic source materials used to compile GTOPO30, which primarily consist of Defense Mapping Agency (DMA) digital elevation and topographic map products. These biases imply that elevation corrections applied to land gravity measurements using these DMA source materials will be biased, leading to errors in geoid models incorporating these land gravity data.

Harding, David J.↗

NASA NTRS1994

Radiative force model performance for TOPEX/Poseidon precision orbit determination

The TOPEX/Poseidon spacecraft was launched to study the Earth's oceans. To maximize the benefit from the alimetric data collected, mission requirements dictate that TOPEX/Poseidon's orbit must be computed at extremely high accuracy. To meet these demands, a nonconservative force model which accounts for the satellite's complex geometry, attitude and surface properties has been developed. The 'box-wing' representation treats the spacecraft as the combination of flat plates arranged in the shape of a box and a connected solar array. Model performance and parameter sensitivities are discussed.

TRT-THEORETICAL↗

NASA NTRS1993

Expected orbit determination performance for the TOPEX/Poseidon mission

Each of the components required for the computation of precise orbits for the TOPEX/Poseidon (T/P) spacecraft - gravity field modeling, nonconservative force modeling, and satellite tracking technologies - is examined. The research conducted in the Space Geodesy Branch at Goddard Space Flight Center in preparation for meeting the 13-cm radial orbit accuracy requirement for the T/P mission is outlined. New developments in modeling the earth's gravitational field and modeling the complex nonconservative forces acting on T/P are highlighted. The T/P error budget is reviewed, and a prelaunch assessment of the predicted orbit determination accuracies is summarized.

Nerem, R. S.↗

NASA NTRS1993

Conservative force model performance for TOPEX/Poseidon precision orbit determination

The TOPEX/Poseidon spacecraft was launched on August 10, 1992 to study the Earth's oceans. To achieve maximum benefit from the altimetric data collected, mission requirements dictate that TOPEX/Poseidon's orbit must be computed at an unprecedented level of accuracy. In order to satisfy these requirements, a model which accounts for the satellite's complex geometry, attitude, and surface properties has been developed. This `box-wing' representation treats the spacecraft as the combination of flat plates arranged in the shape of a box and a connecetd solar array. The nonconservative forces acting on each of the eight surfaces are computed independently, yielding vector accelerations which are summed to compute the total aggregate effect on the satellite center-of-mass. Parameters associated with each flat plate were derived from a finite element analysis of the spacecraft. Certain parameters can be inferred from tracking data and have been adjusted to obtain a better representation of the satellite acceleration history. Changes in the nominal mission profile and the presence of an `anomalistic' force have complicated this tuning process. Model performance, parameter sensitivities, and the `anomalistic' force will be discussed.

Marshall, J. Andrew↗