Engineering topics

Marshall, W. K.

Publications and source records attributed to Marshall, W. K..

11 records

NASA NTRS1989

Design And Analysis Of Optical Communication Links

To convey to prospective designers intuitive understanding based on unique characteristics of optical communication systems, report presents method of design and analysis of outer-space optical communication link using pulse-position modulation (PPM) and in which received signal sufficiently weak to require detection by photomultiplier operating in photon-counting mode. Step 1 requires some knowledge or assumptions about parameters of transmitter and receiver. Step 2 determination of average number of background-noise photons detected during PPM timeslot. Step 3 average number, Ps of signal photons detected per signal pulse compared with average number, Pn of noise pulses detected per PPM timeslot.

Lesh, J. R.↗

NASA NTRS1988

Performance of efficient Q-switched diode-laser-pumped Nd:YAG and Ho:YLF lasers for space applications

Solid-state lasers pumped by continuous-wave diode lasers can be Q-switched to obtain high peak power output pulses. The dependence of laser-pulse energy, average output power, peak power, and pulse width on pulse-repetition frequency in Q-switched Nd:YAG and Ho:YLF lasers is determined and compared. At low pulse repetition rates, the much longer upper-stage lifetime in Ho:YLF gives a distinct advantage. At higher pulse rates, the overall laser efficiency and the stimulated emission cross section are more important parameters, leading to an advantage for Nd:YAG. The results are of significance for designing lasers for use in space optical communications and remote sensing systems.

Marshall, W. K.↗

NASA NTRS1986

Received optical power calculations for optical communications link performance analysis

The factors affecting optical communication link performance differ substantially from those at microwave frequencies, due to the drastically differing technologies, modulation formats, and effects of quantum noise in optical communications. In addition detailed design control table calculations for optical systems are less well developed than corresponding microwave system techniques, reflecting the relatively less mature state of development of optical communications. Described below are detailed calculations of received optical signal and background power in optical communication systems, with emphasis on analytic models for accurately predicting transmitter and receiver system losses.

Marshall, W. K.↗

NASA NTRS1986

Electroabsorption Infrared Modulators

Solid-state infrared modulator arrays fabricated and tested successfully. Arrays based on electro-absorption, and because of high speed inherent in small devices of this kind, expected to perform well at multigigahertz frequencies in such applications as multiplexing, demultiplexing, high-speed recording, and printing.

Robinson, D. L.↗

NASA NTRS1986

Direct analysis of gain-guided phase-locked semiconductor laser arrays

A method for analyzing arbitrary one-dimensional waveguides is described and applied to find the lateral modes of gain-guided laser arrays directly, without the need for a coupled-mode approximation. Detailed results are given for a four-element array for which experimental results are available, and the effect of varying device parameters on the relative gains of the modes is considered. The results show differences between gain-guided and real-index guided arrays which are not evident in prior analyses.

Marshall, W. K.↗

NASA NTRS1986

A simple method for designing or analyzing an optical communication link

A simple method is described for determining the performance of a free space optical communication link. The method can be used either in the system design (synthesis) mode or in the performance evaluation (analysis) mode. Although restricted to photo counting based detection of pulse position modulated signals, the method is still sufficiently general to accommodate space-based, as well as ground-based, reception.

Lesh, J. R.↗

NASA NTRS1985

Gain saturation effects in supermodes of phase-locked semiconductor laser arrays

A basic modal analysis that includes gain saturation effects in phase-locked semiconductor laser arrays is presented. For a particular supermode operation, different lasers in the array emit different amounts of light, and hence their (waveguide) propagation constants are modified differently. Solving the lasers' rate equations self-consistently with the coupled-mode wave equations seems to provide an answer that is in much better agreement with experimental results than the result using only the coupled-mode analysis.

Katz, J.↗

NASA NTRS1985

Waveguide PIN junction electrooptic phase modulators Theoretical analysis and design criteria

Basic design equations for waveguide PIN heterojunction electrooptic phase modulators utilizing the linear electrooptic effect are derived, and criteria for optimum operation (in terms of obtainable phase shifts) are discussed. Although the numerical examples pertain to devices fabricated of the AlGaAs system on (100) substrates, the same method can be directly applied to modulators fabricated of other materials.

Marshall, W. K.↗

NASA NTRS1985

Detection and Symbol Synchronization for Multiple-bit Per Photon Optical Communications

Methods of detection and synchronization in a highly efficient direct detection optical communication system are reported. Results of measurements on this moderate-rate demonstration system capable of transmitting 2.5 bits/detected photon in low-background situations indicate that symbol slot synchronization is not a problem, and that a simple symbol detection scheme is adequate for this situation. This system is a candidate for interplanetary optical communications.

Marshall, W. K.↗

NASA NTRS1984

Monolithically integrated array of GaAlAs electroabsorption modulators

The operation of an eight-element monolithic array of GaAlAs electroabsorption modulators has been demonstrated. The single-mode waveguide modulators are implemented in a reverse-biased p-pi-n heterojunction configuration, with center-to-center spacing of 9 microns between adjacent channels. This device may be useful for intensity modulation in high (spatial) resolution applications.

Robinson, D. L.↗

NASA NTRS1982

A PPM modulator and demodulator for the 2.5 bit/detected photon demonstration

In addition to performing the basic pulse position modulation and demodulation, the hardware described also indicates the occurrence of erasures and errors of various types. The analyzer portion of the circuit counts the number of pulses received in a word, demodulates a second input pulse (if one is received), indicates the occurrence of erasures, and detects PPM word errors. Word errors are detected by comparing the modulator input word to the corresponding demodulator output. These functions are provided mainly for testing and diagnosis of the system during the feasibility demonstration period.

Marshall, W. K.↗