Commission of the Transverse Bunch-by-Bunch Feedback at SPEAR3
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Martin, D. J..
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Photolithography was used to produce a resistance grid on the surface of a DCB fracture specimen. The grid line spacings were 10 microns over a distance of 2 cm. Slow crack growth was measured on soda-lime-silica glass. At low values of K(I) (0.3 to 0.4 MPa.sq r + m, increased. Equations are given for the design of grids. The grid technique could be used to measure very slow crack growth at high temperature with appropriate compatible metal-ceramic materials.
A new approach to providing motion drive signals to a flight simulator utilizing coordinated adaptive filters is presented. Some motivation for the use of coordinated washout is discussed, along with conditions that determine the burden of coordination. The coordinated adaptive filters are derived, based on continuous steepest descent, and the application of the filters to simulated flight data is demonstrated.
Flutter analysis, criteria and experiments emphasizing aircraft applications
Sinusoidal pulse test method to account for variation of shock spectra with damping
Elastic properties, displacement, and influence coefficient measurements of aircraft structures
Explore the source record for details and available documents.
Static aeroelastic divergence characteristics of delta-planform model of canard control surfaces
Testing method for spacecraft response during environmental testing equivalent to its response to excitation by sinusoidal transients in flight
Explore the source record for details and available documents.
Aeroelasticity - methods of measuring structural influence coefficients
The static aeroelastic divergence characteristics of a delta-planform model of the canard control surface of a proposed air-to-ground missile have been studied both analytically and experimentally in the Mach number range from 0.6 to 3.0. The experiments indicated that divergence occurred at a nearly constant value of dynamic pressure at Mach numbers up to 1.2. At higher Mach numbers somewhat higher values of dynamic pressure were required to produce divergence. The analysis and the experiment indicate that the camber stiffness of the control surface and the stiffness of the control actuator are both important in divergence of surfaces of this type.
Explore the source record for details and available documents.