Search NASA⌕ Search

Engineering topics

Menees, Gene P.

Publications and source records attributed to Menees, Gene P..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

The Use of Steady and Pulsed Detonations for Propulsion Systems

Objectives of the ODWE concept studies are: demonstrate the feasibility of the oblique detonation wave engine (ODWE) for hypersonic propulsion; demonstrate the existance and stability of an oblique detonation wave in hypersonic wind tunnels; develop engineering codes which predict the performance characteristics of the ODWE including specific impulse and thrust coefficients for various operating conditions; develop multi-dimensional computer codes which can model all aspects of the ODWE including fuel injection, mixing, ignition, combustion and expansion with fully detailed chemical kinetics and turbulence models; and validate the codes with experimental data use the simulations to predict the ODWE performance for conditions not easily obtained in wind tunnels.

Adelman, Henry G.↗
NASA NTRS1995

The Use of Steady and Unsteady Detonation Waves for Propulsion Systems

Detonation wave enhanced supersonic combustors such as the Oblique Detonation Wave Engine (ODWE) are attractive propulsion concepts for hypersonic flight. These engines utilize detonation waves to enhance fuel-air mixing and combustion. The benefits of wave combustion systems include shorter and lighter engines which require less cooling and generate lower internal drag. These features allow air-breathing operation at higher Mach numbers than the diffusive burning scramjet delaying the need for rocket engine augmentation. A comprehensive vehicle synthesis code has predicted the aerodynamic characteristics and structural size and weight of a typical single-stage-to-orbit vehicle using an ODWE. Other studies have focused on the use of unsteady or pulsed detonation waves. For low speed applications, pulsed detonation engines (PDE) have advantages in low weight and higher efficiency than turbojets. At hypersonic speeds, the pulsed detonations can be used in conjunction with a scramjet type engine to enhance mixing and provide thrust augmentation.

Adelman, Henry G.↗
NASA NTRS1994

Analytical Studies of Prompt NO(x) Emissions from Aircraft Gas Turbine Combustors

The reduction of oxides of nitrogen (NO(x)) emissions from aircraft gas turbines is a vital part of the NASA High Speed Research Program (HSRP). Emissions reduction studies are critical to the feasibility of future civil aircraft operating at supersonic speeds in the stratosphere. It is believed that large fleets of supersonic aircraft using conventional gas turbine engines would emit levels of NO(x) that are harmful to the stratospheric ozone layer.

Adelman, Henry G.↗
NASA NTRS1993

Numerical simulations of a pulsed detonation wave augmentation device

We present here the concept of a hybrid engine for Single Stage To Orbit (SSTO) air-breathing hypersonic vehicle. This concept relies on the use of pulsed detonation waves, both for thrust generation and mixing/combustion augmentation. We describe the principles behind the engine concept, which we call the Pulsed Detonation Wave Augmentor (PDWA). We demonstrate the principles of operation for two possible configurations through numerical simulations. We also attempt a first approximation to engine design, and propose various applications.

Cambier, Jean-Luc↗
NASA NTRS1993

Atmospheric entry of Mars-return nuclear-powered vehicles due to accidental termination of operations

The entry of nuclear reactors into Earth's atmosphere resulting from an accidental or inadvertent abort of a space vehicle powered by nuclear-thermal rockets is investigated. The study is made for a typical piloted Mars mission vehicle incapacitated by an accident or malfunction during the Earth-arrival phase of the Mars-return journey due to simultaneous, multiple failures of its component systems. A single accident/abort scenario resulting in three entry possibilities is considered for a nominal hyperbolic in-bound approach velocity of 8 km/sec. The most severe case involving a direct entry is then analyzed over a broad range of approach velocities extending to 12 km/sec to include sprint-type missions. The results indicate that the severe surface heating, stagnation pressures, and g-loads are greater than 150 kW/sq cm, 300 atm, and 800-g, respectively. The wall heat transfer rate exceeds the value that can be accommodated by a carbon heatshield through radiation equilibrium prior to sublimation at 5500 K. These conditions are beyond our previous experience in crew safety, structural design, and thermal protection.

Menees, Gene P.↗
NASA NTRS1993

NO(x) reduction additives for aircraft gas turbine engines

The reduction of oxides of nitrogen (NO(x)) emissions from aircraft gas turbine engines is a vital part of the NASA High Speed Research Program. Emissions reductions are critical to the feasibility of future High Speed Civil Transports which operate at supersonic speeds in the stratosphere. It is believed that large fleets of such aircraft using conventional gas turbine engines would emit levels of NO(x) that would be harmful to the stratospheric ozone layer. Previous studies have shown that NO(x) emissions can be reduced from stationary powerplant exhausts by the addition of additives such as ammonia to the exhaust gases. Since the exhaust residence times, pressures and temperatures may be different for aircraft gas turbines, a study has been made of additive effectiveness for high speed, high altitude flight.

Adelman, Henry G.↗
NASA NTRS1992

Atmospheric entry of nuclear-powered vehicles due to accidental/inadvertent termination of operations

The entries of the radioactive components into earth's atmosphere resulting from an accident or inadvertent abort of a space vehicle powered by nuclear-thermal-rockets are investigated. The study is made for a typical piloted Mars mission vehicle incapacitated by an accident or malfunction during the trans-Mars-injection maneuver due to simultaneous multiple failures of its component systems. The three different accident/abort modes considered are the following: (1) a constant-rate angular pitching motion of the vehicle, (2) a constant-acceleration angular pitching motion of the vehicle, and (3) the rocket engine breaks away from the rest of the vehicle with a finite relative (dispersion) velocity. The speeds and angles of the atmospheric entries are calculated for each mode for different values of the time of the accident, pitching rate, acceleration, and dispersion velocity. For the most severe entry speeds and flight-path angles, the stagnation-point pressures, heat transfer rates, thickness, and mass per unit area of the heat shields necessary to protect the radioactive components from disintegrating, deceleration g-loads, and high ground-impact velocities are calculated. The study points out that the high g-loads and high ground-impact velocities are the most serious problems that must be addressed.

Menees, Gene P.↗
NASA NTRS1991

Analytical and experimental investigations of the oblique detonation wave engine concept

Wave combustors, which include the Oblique Detonation Wave Engine (ODWE), are attractive propulsion concepts for hypersonic flight. These engines utilize oblique shock or detonation waves to rapidly mix, ignite, and combust the air-fuel mixture in thin zones in the combustion chamber. Benefits of these combustion systems include shorter and lighter engines which will require less cooling and can provide thrust at higher Mach numbers than conventional scramjets. The wave combustor's ability to operate at lower combustor inlet pressures may allow the vehicle to operate at lower dynamic pressures which could lessen the heating loads on the airframe. The research program at NASA-Ames includes analytical studies of the ODWE combustor using CFD codes which fully couple finite rate chemistry with fluid dynamics. In addition, experimental proof-of-concept studies are being carried out in an arc heated hypersonic wind tunnel. Several fuel injection designs were studied analytically and experimentally. In-stream strut fuel injectors were chosen to provide good mixing with minimal stagnation pressure losses. Measurements of flow field properties behind the oblique wave are compared to analytical predictions.

Menees, Gene P.↗
NASA NTRS1990

Analytical and experimental investigations of the oblique detonation wave engine concept

Wave combustors, which include the oblique detonation wave engine (ODWE), are attractive propulsion concepts for hypersonic flight. These engines utilize oblique shock or detonation waves to rapidly mix, ignite, and combust the air-fuel mixture in thin zones in the combustion chamber. Benefits of these combustion systems include shorter and lighter engines which require less cooling and can provide thrust at higher Mach numbers than conventional scramjets. The wave combustor's ability to operate at lower combustor inlet pressures may allow the vehicle to operate at lower dynamic pressures which could lessen the heating loads on the airframe. The research program at NASA-Ames includes analytical studies of the ODWE combustor using Computational Fluid Dynamics (CFD) codes which fully couple finite rate chemistry with fluid dynamics. In addition, experimental proof-of-concept studies are being performed in an arc heated hypersonic wind tunnel. Several fuel injection design were studied analytically and experimentally. In-stream strut fuel injectors were chosen to provide good mixing with minimal stagnation pressure losses. Measurements of flow field properties behind the oblique wave are compared to analytical predictions.

Menees, Gene P.↗
NASA NTRS1989

Wave combustors for trans-atmospheric vehicles

The Wave Combustor is an airbreathing hypersonic propulsion system which utilizes shock and detonation waves to enhance fuel-air mixing and combustion in supersonic flow. In this concept, an oblique shock wave in the combustor can act as a flameholder by increasing the pressure and temperature of the air-fuel mixture and thereby decreasing the ignition delay. If the oblique shock is sufficiently strong, then the combustion front and the shock wave can couple into a detonation wave. In this case, combustion occurs almost instantaneously in a thin zone behind the wave front. The result is a shorter, lighter engine compared to the scramjet. This engine, which is called the Oblique Detonation Wave Engine (ODWE), can then be utilized to provide a smaller, lighter vehicle or to provide a higher payload capability for a given vehicle weight. An analysis of the performance of a conceptual trans-atmospheric vehicle powered by an ODWE is given here.

Menees, Gene P.↗
NASA NTRS1989

Wave combustors for trans-atmospheric vehicles

A performance analysis is given of a conceptual transatmospheric vehicle (TAV). The TAV is powered by a an oblique detonation wave engine (ODWE). The ODWE is an airbreathing hypersonic propulsion system which utilizes shock and detonation waves to enhance fuel-air mixing and combustion in supersonic flow. In this wave combustor concept, an oblique shock wave in the combustor can act as a flameholder by increasing the pressure and temperature of the air-fuel mixture, thereby decreasing the ignition delay. If the oblique shock is sufficiently strong, then the combustion front and the shock wave can couple into a detonation wave. In this case, combustion occurs almost instantaneously in a thin zone behind the wave front. The result is a shorter lighter engine compared to the scramjet. The ODWE-powered hypersonic vehicle performance is compared to that of a scramjet-powered vehicle. Among the results outlined, it is found that the ODWE trades a better engine performance above Mach 15 for a lower performance below Mach 15. The overall higher performance of the ODWE results in a 51,000-lb weight savings and a higher payload weight fraction of approximately 12 percent.

Menees, Gene P.↗
NASA NTRS1989

Experimental and analytical investigations of wave enhanced supersonic combustors

Supersonic combustion ramjet (scramjet) engines rely on rapid mixing and combustion of fuel for good performance. However, both of these processes are relatively slow compared to the residence times in supersonic combusters. Methods of improving the mixing process include subjecting the fuel streams to shock waves and the generation of vortices by spiriling, bifurcating struts. The combustion process can also be enhanced by shock or detonation waves. An oblique shock wave can act as a flameholder by increasing the pressure and temperature of the air-fuel mixture and thereby decreasing the ignition delay. If the oblique shock is sufficiently strong, then the combustion front and the shock wave can couple into a detonation wave. In this case, combustion occurs almost instantaneously in a thin zone behind the wave front. While the existence of standing oblique detonation waves has been proven in computer simulations, the experimental validation is still in progress. Currently, there is an experimental and analytical program at NASA-Ames Research Center to study detonations and other means of wave enhanced supersonic mixing and combustion.

Adelman, Henry G.↗
NASA NTRS1989

Comparative flight strategies for ascent from Martian surface to orbiter rendezvous

Flight maneuvers and strategies to transport a vehicle from the Martian surface to orbiter rendezvous are analyzed to determine the most fuel-efficient method. Both endo- and exo-atmospheric flight strategies are considered for orbiter rendezvous into parking orbits of arbitrary inclination. It is found that optimal mass efficiency is achieved where the orbiter inclination is equal to or exceeds the latitude of the launch site. It is shown that high aerodynamic lifting capability improves performance for low circular orbit (LCO) rendezvous. It is suggested that the synergetic ballistic-projecting technique is best for optimal LCO rendezvous and that the all-thrust technique with plane change at apoapsis is best for optimal high elliptical orbit rendezvous.

Menees, Gene P.↗
NASA NTRS1989

A multi-temperature TVD algorithm for relaxing hypersonic flows

In this paper, the extension of a multispecies TVD algorithm, second-order accurate for real-gas flows to a multitemperature formulation is described. The convection algorithm is coupled to internal relaxation processes, and the features of the coupling are examined. The first version consists of a three-temperature model, where translational-rotational, vibrational, and electronic energy modes are separately convected. Although several species are present, there is only one vibrational temperature in this model. The second version generalizes to a vibrational temperature for each molecular specie, with additional couplings between species. The algorithms are applied to a generic two-dimensional flow field, and results are compared with experimental observations.

Cambier, Jean-Luc↗