Search NASA⌕ Search

Engineering topics

Middleton, Robert

Publications and source records attributed to Middleton, Robert.

Dynamic Species Reduction for Multi-Cycle CFD Simulations (Final Technical Report)

This project primarily sought to address some of the computational cost concerns of detailed simulations by developing improved methods of handling species transport, and chemical kinetics evaluation in a commercial 3D Computational Fluid Dynamics (CFD) environment. Secondary goals were to apply these techniques to fuels and conditions of interest to better understand the key species and reactions required to adequately capture cycle to cycle coupling. Improved modeling will lead to better understanding of these combustion modes and their dependence on fuel composition, which can then enable more clean and efficient engines, ultimately benefiting the consumer as well as the general public. Two approaches were used to address the computational cost. A “Dynamic Species Reduction” (DSR) procedure was developed to remove chemical species from the simulation during periods when chemical reactions were not expected to be important, particularly during gas exchange when temperatures are low and little fuel remains. This modelling procedure automatically detects relevant species to retain in the simulation domain based on their local concentration, removes species below a specified concentration threshold, and then adjusts the remaining species mass to conserve not only the number of H, C, and O atoms in each cell, but also the relative proportions between species and the heating value of the mixture in every cell. The second procedure was a “Product Directed Remapping” (PDR) updates the algorithm used to group individual computational cells for chemical kinetics evaluation to account for non-uniform temperature distributions and the CO to CO 2 ratio in the cells. The model techniques developed in this work successfully demonstrated computational performance improvements for a range of conditions relevant for Highly Dilute SI and HCCI engine operation. Runtime reductions of 10% were observed for small mechanisms, with further reductions of up to 36% observed for larger mechanisms. Improvements were primarily related to reducing the number of chemical species tracked during the gas exchange process using the Dynamic Species Reduction method. With smaller benefits observed from changes to the kinetics binning and evaluation strategy in the post combustion region using the PDR method. The results of this work show the potential for improved computational runtime for complicated simulations. They can and should be extended to additional conditions and new bio-derived and renewable fuels as they are developed and new kinetic mechanisms become available.

10 SYNTHETIC FUELS↗

Power Split Supercharging: A Mild Hybrid Approach to Boost Fuel Economy

This work investigates an innovative low-voltage (<60 V) hybrid device that enables engine boosting and downsizing in addition to mild hybrid functionalities such as regenerative braking, start-stop, and torque assist. A planetary gear set and a brake permit the power split supercharger (PSS) to share a 9 kW motor between supercharging the engine and direct torque supply to the crankshaft. In contrast, most e-boosting schemes use two separate motors for these two functionalities. This single motor structure restricts the PSS operation to only one of the supercharging or parallel hybrid modes; therefore, an optimized decision making strategy is necessary to select both the device mode and its power split ratio. An adaptive equivalent consumption minimization strategy (A-ECMS), which uses the battery state of charge (SoC) history to adjust the equivalence factor, is developed for energy management of the PSS. The A-ECMS effectiveness is compared against a dynamic programming (DP) solution with full drive cycle preview through hardware-in-the-loop experiments on an engine dynamometer testbed. The experiments show that the PSS with A-ECMS reduces vehicle fuel consumption by 18.4% over standard FTP75 cycle, compared to a baseline turbocharged engine, while global optimal DP solution decreases the fuel consumption by 22.8% compared to the baseline.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Final Report: Utilizing Alternative Fuel Ignition Properties to Improve SI and CI Engine Efficiency

Experimental and modeling studies were completed to explore leveraging physical and chemical fuel properties for improved thermal efficiency of internal combustion engines. Fundamental studies of the ignition chemistry of ethanol and iso-octane blends and constant volume spray chamber studies of gasoline and diesel sprays supported the core research effort which used several reciprocating engine platforms. Single cylinder spark ignition (SI) engine studies were carried out to characterize the impact of ethanol/gasoline, syngas (H 2 and CO)/gasoline and other oxygenate/gasoline blends on engine performance. The results of the single-cylinder engine experiments and other data from the literature were used to train a GT Power model and to develop a knock criteria based on reaction chemistry. The models were used to interpret the experimental results and project future performance. Studies were also carried out using a state of the art, direct injection (DI) turbocharged multi- cylinder engine with piezo-actuated fuel injectors to demonstrate the promising spray and spark timing strategies from single-cylinder engine studies on the multi-cylinder engine. Key outcomes and conclusions of the studies were: 1. Efficiency benefits of ethanol and gasoline fuel blends were consistent and substantial (e.g. 5-8% absolute improvement in gross indicated thermal efficiency (GITE)). 2. The best ethanol/gasoline blend (based on maximum thermal efficiency) was determined by the engine hardware and limits based on component protection (e.g. peak in-cylinder pressure or maximum turbocharger inlet temperature) – and not by knock limits. Blends with <50% ethanol delivered significant thermal efficiency gains with conventional SI hardware while maintain good safety integrity to the engine hardware. 3. Other compositions of fuel blends including syngas (H 2 and CO) and other dilution strategies provided significant efficiency gains as well (e.g. 5% absolute improvement in ITE). 4. When the combination of engine and fuel system is not knock limited, multiple fuel injection events maintain thermal efficiency while improving engine-out emissions (e.g. CO, UHC, and particulate number).

33 ADVANCED PROPULSION SYSTEMS↗

The UK's National Policy and Programme for the Management of Spent Fuel and Radioactive Waste - 16574

This paper provides a broad overview of the United Kingdom's (UK's) national policies and national programme for the management of spent fuel and radioactive waste. The aim of the paper is to ensure a clear understanding of the approach taken in the UK so that opportunities for learning lessons and joint working, where they exist, can be identified and to ensure a general understanding of the interdependencies between the various approaches taken in the UK. With a legacy that dates back to the late 1940's/early 1950's the UK have a range of complex and difficult issues to resolve that have evolved over time. What was considered to be acceptable in the past is not thought of in the same way today. We therefore need to be forward thinking, innovative and above all ready to adapt our practices and policies to address previously unknown issues and complications. Due to the wide range of types of radioactive wastes and materials to be managed in the UK we have needed to establish a set of high level principles to cover all radioactive waste types while at the same time ensure that specific approaches for specific issues are developed within that framework. In the UK we have also had to consider the issue of integration to ensure that an approach that addresses one issue does not inadvertently cause a problem elsewhere - for example: in disposing of the high volumes of very low level waste we needed an approach to ensure that other low level waste has a disposal route. Financing of decommissioning and future waste management is clearly one of the biggest challenges to be addressed. As mentioned above ensuring that the legacy left for future generation is not one of a burden - we need to ensure that measures are in place to fund and manage long lived radioactive wastes. Finally, it is clear that not all radioactive wastes are the same and therefore different approaches are needed for managing the different types of material. This requires a proportionate and prioritised approach so while the same ultimate goal is applied (i.e.: the safe and responsible management of radioactive waste) some radioactive wastes are more equal than others and need to be treated accordingly. In the UK we believe that we have a broad programme in place that allows the right balance to be struck in managing all our radioactive waste and spent fuel in a proportionate, safe and responsible manner.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗