Search NASA⌕ Search

Engineering topics

Minor, A. M.

Publications and source records attributed to Minor, A. M..

16 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Correlated 4D-STEM and EDS for the classification of fine Beta-precipitates in aluminum alloy AA 6063-T6

Tuning the properties of aluminum alloys AA 6063-T6 involves artificial aging to induce precipitate formation, particularly β’’ and β’ phases. Previous characterization challenges due to their similar appearance are addressed here by correlating 4D scanning transmission electron microscopy (4DSTEM) and energy-dispersive spectroscopy (EDS) mapping. This approach allows us to analyze the structure and composition of precipitates individually, overcoming limitations of conventional imaging and structural analysis techniques when the precipitates appear simultaneously, as is often the case. We present detailed characterizations of needle-shaped Beta precipitates, revealing distinct diffraction patterns (DPs) and compositional differences. The method's applicability extends beyond aluminum alloys, offering a promising strategy for complex composite material characterization with multimodal scanning transmission electron microscopy (STEM) techniques.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Near-Monochromatic Tuneable Cryogenic Niobium Electron Field Emitter

We report creating, manipulating, and detecting coherent electrons is at the heart of future quantum microscopy and spectroscopy technologies. Leveraging and specifically altering the quantum features of an electron beam source at low temperatures can enhance its emission properties. Here, we describe electron field emission from a monocrystalline, superconducting niobium nanotip at a temperature of 5.9 K. The emitted electron energy spectrum reveals an ultranarrow distribution down to 16 meV due to tunable resonant tunneling field emission via localized band states at a nanoprotrusion’s apex and a cutoff at the sharp low-temperature Fermi edge. This is an order of magnitude lower than for conventional field emission electron sources. The self-focusing geometry of the tip leads to emission in an angle of 3.7°, a reduced brightness of 3.8 × 10 8 A/(m 2 srV), and a stability of hours at 4.1 nA beam current and 69 meV energy width. This source will decrease the impact of lens aberration and enable new modes in low-energy electron microscopy, electron energy loss spectroscopy, and high-resolution vibrational spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Atomic Resolution Probing of Phase Transformations and Domain Evolution During Large Superelastic Deformation in Ferroelectrics with in situ TEM

Intrinsically brittle Ferroelectrics have attractive applications such as flexible/wearable electronic devices and mechanically-written high-density memory that depend on both functional and mechanical performance. One potential way to mitigate their brittle behavior is through large superelastic deformation stemming from strain-driven phase transformations and domain evolution. Therefore, in this work, we investigated free-standing single-crystal BaTiO 3 and Pb(Mg 1/3 Nb 2/3 )O 3 -PbTiO 3 sub-micrometer pillars during large superelastic deformation, directly observing the stress-induced phase transformations and domain evolution by using in situ Scanning Transmission Electron Microscope (STEM). We found ultra-small and multiple-phase coexistence with sizes down to a few unit cells, and we were able to study them at atomic resolution while under load. Notably, extremely small phase transformation structures and domain structures are often introduced during the large superelastic deformations since the stress field is not screened in ferroelectrics, as compared to the situation with electrical field or thermal cycling.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Multiscale analysis of nanoindentation-induced defect structures in gum metal

Using ex-situ transmission electron microscopy and the recently developed nanoprobe diffraction (NPD) technique, we characterize a nanoindented solution treated gum metal. Lattice rotations are resolved at a 1.2 nm length-scale and shown to be continuous within the nanoindentation pit; further, it is revealed that these can be accommodated by a reasonable number of geometrically necessary dislocations at a density of ~10 15 /m 2 . We furthermore provide direct evidence that dislocations within the nanoindent, rather than secondary phase nanoparticles, can serve as potent barriers to dislocation motion. We also demonstrate that plasticity in these alloys under nanoindentation can be accommodated solely by dislocation nucleation and propagation, with no competing deformation mechanisms present. Conventional transmission electron microscopy and “ g•b ” analysis reveal the presence of dislocations on &lang;$ \bar{1}11 $&rang;{110} slip systems and highly localized plastic deformation in the form of shear bands on <111>{$ \bar{1} \bar{1}2 $} slip systems, similar to previously observed “giant faults”.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Indentation size effect in unirradiated and ion-irradiated 800H steel at high temperatures

Nanoindentation is a widespread and useful method for evaluating mechanical properties at the sub-micron length scale. However, the indentation size effect remains a major obstacle to obtain meaningful macroscopic mechanical properties from small volume testing. Here, this work systematically addresses the Indentation Size Effect (ISE) phenomenon as a function of temperature and defect density in an austenitic Fe-Cr-Ni alloy (800H) to establish the baseline for nanoindentation testing of ion-irradiated alloys in environmental conditions. The 800H steel sample was irradiated with 70 MeV Fe 9+ at 450 °C to the total dose of 20.68 dpa. All samples were tested up to 300 °C in order to quantify the effect of temperature on the indentation size effect. It was found that in all cases, the ISE is less pronounced at high temperatures due to the increase of the plastic zone size. For the same grain orientation, the ISE is less pronounced in the irradiated 800H at all temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Electron transport and visible light absorption in a plasmonic photocatalyst based on strontium niobate

Semiconductor compounds are widely used for photocatalytic hydrogen production applications, where photogenerated electron–hole pairs are exploited to induce catalysis. Recently, powders of a metallic oxide (Sr 1-x NbO 3 , 0.03$<$x$<$0.20) were reported to show competitive photocatalytic efficiencies under visible light, which was attributed to interband absorption. This discovery expanded the range of materials available for optimized performance as photocatalysts. Here we study epitaxial thin films of SrNbO 3+δ and find that their bandgaps are ~4.1 eV. Surprisingly, the carrier density of the conducting phase exceeds 10 22 cm -3 and the carrier mobility is only 2.47 cm 2 V -1 s -1 . Contrary to earlier reports, the visible light absorption at 1.8 eV (~688 nm) is due to the plasmon resonance, arising from the large carrier density. We propose that the hot electron and hole carriers excited via Landau damping (during the plasmon decay) are responsible for the photocatalytic property of this material under visible light irradiation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2017

Influence of the Ag concentration on the medium-range order in a CuZrAlAg bulk metallic glass

Fluctuation electron microscopy of bulk metallic glasses of CuZrAl(Ag) demonstrates that medium-range order is sensitive to minor compositional changes. Furthermore, by analyzing nanodiffraction patterns medium-range order is detected with crystal-like motifs based on the B2 CuZr structure and its distorted structures resembling the martensitic ones. This result thus demonstrates some structural homology between the metallic glass and its high temperature crystalline phase. The amount of medium-range order seems slightly affected with increasing Ag concentration (0, 2, 5 at.%) but the structural motifs of the medium-range ordered clusters become more diverse at the highest Ag concentration. The decrease of dominant clusters is consistent with the destabilization of the B2 structure measured by calorimetry and accounts for the increased glass-forming ability.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Local and transient nanoscale strain mapping during in situ deformation

The mobility of defects such as dislocations controls the mechanical properties of metals. This mobility is determined both by the characteristics of the defect and the material, as well as the local stress and strain applied to the defect. Therefore, the knowledge of the stress and strain during deformation at the scale of defects is important for understanding fundamental deformation mechanisms. In this paper, we demonstrate a method of measuring local stresses and strains during continuous in situ deformation with a resolution of a few nanometers using nanodiffraction strain mapping. Finally, our results demonstrate how large multidimensional data sets captured with high speed electron detectors can be analyzed in multiple ways after an in situ TEM experiment, opening the door for true multimodal analysis from a single electron scattering experiment.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Observation of polar vortices in oxide superlattices

The complex interplay of spin, charge, orbital and lattice degrees of freedom provides a plethora of exotic phases and physical phenomena. In recent years, complex spin topologies have emerged as a consequence of the electronic band structure and the interplay between spin and spin-orbit coupling in materials. Here we produce complex topologies of electrical polarization-namely, nanometre-scale vortex-antivortex (that is, clockwise-anticlockwise) arrays that are reminiscent of rotational spin topologies-by making use of the competition between charge, orbital and lattice degrees of freedom in superlattices of alternating lead titanate and strontium titanate layers. Atomic-scale mapping of the polar atomic displacements by scanning transmission electron microscopy reveals the presence of long-range ordered vortex-antivortex arrays that exhibit nearly continuous polarization rotation. Phase-field modelling confirms that the vortex array is the low-energy state for a range of superlattice periods. Within this range, the large gradient energy from the vortex structure is counterbalanced by the corresponding large reduction in overall electrostatic energy (which would otherwise arise from polar discontinuities at the lead titanate/strontium titanate interfaces) and the elastic energy associated with epitaxial constraints and domain formation. These observations have implications for the creation of new states of matter (such as dipolar skyrmions, hedgehog states) and associated phenomena in ferroic materials, such as electrically controllable chirality.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Strain mapping at nanometer resolution using advanced nano-beam electron diffraction

In this work, we report on the development of a nanometer scale strain mapping technique by means of scanning nano-beam electron diffraction. Only recently possible due to fast acquisition with a direct electron detector, this technique allows for strain mapping with a high precision of 0.1% at a lateral resolution of 1 nm for a large field of view reaching up to 1 μm. We demonstrate its application to a technologically relevant strain-engineered GaAs/GaAsP hetero-structure and show that the method can even be applied to highly defected regions with substantial changes in local crystal orientation. Strain maps derived from atomically resolved scanning transmission electron microscopy images were used to validate the accuracy, precision and resolution of this versatile technique.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Accessing defect dynamics using intense, nanosecond pulsed ion beams

Gaining in-situ access to relaxation dynamics of radiation induced defects will lead to a better understanding of materials and is important for the verification of theoretical models and simulations. We show preliminary results from experiments at the new Neutralized Drift Compression Experiment (NDCX-II) at Lawrence Berkeley National Laboratory that will enable in-situ access to defect dynamics through pump-probe experiments. Here, the unique capabilities of the NDCX-II accelerator to generate intense, nanosecond pulsed ion beams are utilized. Preliminary data of channeling experiments using lithium and potassium ions and silicon membranes are shown. We compare these data to simulation results using Crystal Trim. Furthermore, we discuss the improvements to the accelerator to higher performance levels and the new diagnostics tools that are being incorporated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2013

A Study of Solder Alloy Ductility for Cryogenic Applications

For aerospace applications it is important to understand the mechanical performance of components at the extreme temperature conditions seen in service. For solder alloys used in microelectronics, cryogenic temperatures can prove problematic. At low temperatures Sn-based solders undergo a ductile to brittle transition that leads to brittle cracks, which can result in catastrophic failure of electronic components, assemblies and spacecraft payloads. As industrial processes begin to move away from Pb-Sn solder, it is even more critical to characterize the behavior of alternative Sn-based solders. Here we report on initial investigations using a modified Charpy test apparatus to characterize the ductile to brittle transformation temperature of nine different solder systems.

solders↗