Search NASA⌕ Search

Engineering topics

Neudeck, Philip G.

Publications and source records attributed to Neudeck, Philip G..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Room Temperature Radiation Testing of a 500 °C Durable 4H-SiC JFET Integrated Circuit Technology

Total ionizing dose (TID) and single-event effect (SEE) room-temperature radiation test results are presented for developmental prototype 4H-SiC junction field effect transistor (JFET) semiconductor integrated circuits (ICs) that have demonstrated prolonged operation in extremely high-temperature (500 °C) environments. The devices tested demonstrated over 7 Mrad(Si) TID tolerance and no destructive SEE susceptibility.

Lauenstein, Jean-Marie↗
NASA NTRS2018

Current Source Logic Gate

A current source logic gate with depletion mode field effect transistor ("FET") transistors and resistors may include a current source, a current steering switch input stage, and a resistor divider level shifting output stage. The current source may include a transistor and a current source resistor. The current steering switch input stage may include a transistor to steer current to set an output stage bias point depending on an input logic signal state. The resistor divider level shifting output stage may include a first resistor and a second resistor to set the output stage point and produce valid output logic signal states. The transistor of the current steering switch input stage may function as a switch to provide at least two operating points.

Krasowski, Michael J.↗
NASA NTRS2018

Demonstration of 4H-SiC JFET Digital ICs Across 1000 °C Temperature Range Without Change to Input Voltages

Operational testing of prototype 4H-SiC JFET ICs across an unrivaled ambient temperature span in excess of 1000 °C, from -190 °C to +812 °C, has been demonstrated without any change/adjustment of input signal levels or power supply voltages. This unique ability is expected to simplify infusion of this IC technology into a broader range of beneficial applications.

Neudeck, Philip G.↗
NASA NTRS2018

Interconnection of Semiconductor Devices in Extreme Environment Microelectronic Integrated Circuit Chips

A process of fabrication and the resulting integrated circuit device is made of patterned metal electrical interconnections between semiconductor devices residing on and forming extremely harsh environment integrated circuit chips. The process enables more complicated wide band gap semiconductor integrated circuits with more than one level of interconnect to function for prolonged time periods (over 1000 hours) at much higher temperatures (500 C).

Spry, David J.↗
NASA NTRS2018

Yearlong 500 C Operational Demonstration of Up-Scaled 4H-SiC JFET Integrated Circuits

This work describes recent progress in the design, processing, and testing of significantly up-scaled 500 C durable 4H-SiC junction field effect transistor (JFET) integrated circuit (IC) technology with two-level interconnect undergoing development at NASA Glenn Research Center. For the first time, stable electrical operation of semiconductor ICs for over one year at 500 C in air atmosphere is reported. These groundbreaking durability results were attained on two-level interconnect JFET demonstration ICs with 175 or more transistors on each chip. This corresponds to a more than 7-fold increase in 500 C-durable circuit complexity from the 24 transistor ring oscillator ICs reported at HiTEC 2016. These results advance the technology foundation for realizing long-term durable 500 C ICs with increased functional capability for combustion engine sensing and control, planetary exploration, deep-well drilling monitoring, and other harsh-environment applications.

Silicon carbides↗
NASA NTRS2018

Sixty Earth-Days Test of a Prototype Pt/HTCC Alumina Package in Simulated Venus Environment

This paper presents experimental results of a prototype high temperature co-fired ceramic (HTCC) package with Au/Pt metallization in a three-phase harsh environment test that culminated with 60-day demonstration in simulated Venus surface environment of 465 degrees Centigrade with corrosive atmosphere at 90 bars pressure. The prototype package is based on a previously developed and reported HTCC package successfully tested with multiple analog and digital silicon carbide (SiC) high temperatures semiconductor integrated circuits (ICs) at NASA Glenn Research Center in 500 degrees Centigrade Earth air ambient for over ten thousand hours, and short-term tested at temperatures above 800 degrees Centigrade. The three-phase harsh environment test started with 48 hours in 465 degrees Centigrade Earth air, followed by 48 hours in 465 degrees Centigrade nitrogen at 90-bar pressure and 1400 hours in simulated Venus surface environment of 465 degrees Centigrade with corrosive atmosphere at 90 bars. Initial analytical results of the package materials and surfaces after exposure to the Venus environment are discussed to assess the stability of the packaging materials in the tested environments. The test in a simulated Venus environment was implemented in the NASA Glenn Extreme Environment Rig (GEER). The results of this study suggest that an effective encapsulation of areas of surface metallization and vicinities may help to improve electrical performance of a HTCC alumina packaging system in Venus environment.

Chen, Liang-Yu↗
NASA NTRS2018

Yearlong 500 °C Operational Demonstration of Up-Scaled 4H-SiC JFET Integrated Circuits

This work describes recent progress in the design, processing, upscaling, and testing of 500°C durable two-level interconnect 4H-SiC JFET IC technology undergoing development at NASA Glenn Research Center. For the first time, stable electrical operation of semiconductor ICs for 1 year (8760 hours) at 500°C in air atmosphere is reported. These groundbreaking durability results were attained on two-level interconnect JFET demonstration ICs with 175 or more transistors on each chip. This corresponds to a more than 7-fold increase in 500°C-durable circuit complexity from the 24 transistor ring oscillator ICs reported at HiTEC 2016.

Neudeck, Philip G.↗
NASA NTRS2018

Sixty Earth-Days Test of a Prototype Pt/HTCC Alumina Package in Simulated Venus Environment

This paper presents experimental results of a prototype high temperature co-fired ceramic (HTCC) package with Au/Pt metallization in a three-phase harsh environment test that culminated with 60-day demonstration in simulated Venus surface environment of 465 degC with corrosive atmosphere at 90 bar pressure. The prototype package is based on previously developed and reported HTCC package successfully tested with multiple analog and digital silicon carbide (SiC) high temperatures semiconductor integrated circuits (ICs) at NASA Glenn Research Center in 500 degC Earth air ambient for over ten thousands hours, and short-term tested at temperatures above 800 degC. The three-phase harsh environment test started with 48 hours in 465 degC Earth air, followed by 48 hours in 465 degC nitrogen at 90 bar pressure and 1400 hours in simulated Venus surface environment of 465 degC with corrosive atmosphere at 90 bar. Initial analytical results of the package materials and surfaces after exposure to Venus environment are discussed to assess the stability of the packaging materials in the tested environments. The test in simulated Venus environment was implemented in the NASA Glenn Extreme Environment Rig (GEER). The results of this study suggest that an effective encapsulation of areas of surface metallization and vicinities may help to improve electrical performance of a HTCC alumina packaging system in Venus environment.

Chen, Liangyu↗
NASA NTRS2018

A High Frequency (HF) Inductive Power Transfer Circuit for High Temperature Applications Using SiC Schottky Diodes

Wireless sensors placed in high temperature environments, such as aircraft engines, are desirable to reduce the mass and complexity of routing wires. While communication with the sensors is straight forward, providing power wirelessly is still a challenge. This paper introduces an inductive wireless power transfer circuit incorporating SiC Schottky diodes and its operation from room temperature (25 C) to 500 C.

Diode↗
NASA NTRS2017

Prolonged 500 C Operation of 100+ Transistor Silicon Carbide Integrated Circuits

This report describes more than 5000 hours of successful 500 C operation of semiconductor integrated circuits (ICs) with more than 100 transistors. Multiple packaged chips with two different 4H-SiC junction field effect transistor (JFET) technology demonstrator circuits have surpassed thousands of hours of oven-testing at 500 C. After 100 hours of 500 C burn-in, the circuits (except for 2 failures) exhibit less than 10 change in output characteristics for the remainder of 500C testing. We also describe the observation of important differences in IC materials durability when subjected to the first nine constituents of Venus-surface atmosphere at 9.4 MPa and 460C in comparison to what is observed for Earth-atmosphere oven testing at 500 C.

Silicon Carbid↗
NASA NTRS2017

SPICE Modeling of Body Bias Effect in 4H-SiC Integrated Circuit Resistors

The DC electrical behavior of n-type 4H-SiC resistors used for realizing 500C durable integrated circuits (ICs) is studied as a function of substrate bias and temperature. Improved fidelity electrical simulation is described using SPICE NMOS model to simulate resistor substrate body bias effect that is absent from the SPICE semiconductor resistor model.

Neudeck, Philip G.↗
NASA NTRS2017

Inclusion of Body-Bias Effect in SPICE Modeling of 4H-SiC Integrated Circuit Resistors

The DC electrical behavior of n-type 4H-SiC resistors used for realizing 500 C durable integrated circuits (ICs) is studied as a function of substrate bias and temperature. Improved fidelity electrical simulation is described using SPICE NMOS model to simulate resistor substrate body bias effect that is absent from the SPICE semiconductor resistor model.

Neudeck, Philip G.↗
NASA NTRS2017

Inclusion of Body Bias Effect in SPICE Modeling of 4H-SiC Integrated Circuit Resistors

The DC electrical behavior of n-type 4H-SiC resistors used for realizing 500 degrees Celsius durable integrated circuits (ICs) is studied as a function of substrate bias and temperature. Improved fidelity electrical simulation is described using SPICE NMOS model to simulate resistor substrate body bias effect that is absent from the SPICE semiconductor resistor model.

Neudeck, Philip G.↗
NASA NTRS2017

Prolonged 500 C Operation of 100+ Transistor Silicon Carbide Integrated Circuits

This report describes more than 5000 hours of successful 500 C operation of semiconductor integrated circuits (ICs) with more than 100 transistors. Multiple packaged chips with two different 4H-SiC junction field effect transistor (JFET) technology demonstrator circuits have surpassed thousands of hours of oven-testing at 500 C. After 100 hours of 500 C burn-in, the circuits (except for 2 failures) exhibit less than 10% change in output characteristics for the remainder of 500 C testing. We also describe the observation of important differences in IC materials durability when subjected to the first nine constituents of Venus-surface atmosphere at 9.4 MPa and 460 C in comparison to what is observed for Earth-atmosphere oven testing at 500 C.

Spry, David J.↗
NASA NTRS2017

Magnetic Field Sensing with 4H SiC Diodes: N vs P Implantation

We explore the magnetic sensing capabilities of two 4H-SiC n+p diodes fabricated by NASA Glenn which only differ in the implanted ion species, nitrogen and phosphorus, and the implant activation annealing time. We use low- and high-field electrically detected magnetic resonance (EDMR) to investigate the defect structure used to sense magnetic fields as well as to evaluate the sensitivity. In addition, we expose these devices to high energy electron radiation to evaluate the defect sensing capability in a harsh radiation environment. The results from this work will allow us to tailor our processing methods to design a more optimal 4H-SiC pn diode for magnetic field sensing in harsh environments.

Cochrane, Corey J.↗