Engineering topics

Palaszewski, Bryan

Publications and source records attributed to Palaszewski, Bryan.

At least 55 records · Page 3

NASA NTRS1995

Metallized Gelled Propellants: Oxygen/RP-1/aluminum Rocket Combustion Experiments

A series of combustion experiments were conducted to measure the specific impulse, Cstar-, and specific-impulse efficiencies of a rocket engine using metallized gelled liquid propellants. These experiments used a small 20- to 40-1bf (89- to 178-N) thrust, modular engine consisting of an injector, igniter, chamber and nozzle. The fuels used were traditional liquid RP-1 and gelled RP-1 with 0-, 5-, and 55-wt% loadings of aluminum and gaseous oxygen was the oxidizer. Ten different injectors were used during the testing: 6 for the baseline 02/RP-1 tests and 4 for the gelled fuel tests which covered a wide range of mixture ratios. At the peak of the Isp versus oxidizer-to-fuel ratio (O/F) data, a range of 93 to 99% Cstar efficiency was reached with ungelled 02/RP-1. A Cstar efficiency range of 75 to 99% was obtained with gelled RP-l (0-wt% RP-1/Al) while the metallized 5-wt% RP-1/Al delivered a Cstar efficiency of 94 to 99% at the peak Isp in the O/F range tested. An 88 to 99% Cstar efficiency was obtained at the peak Isp of the gelled RP1/Al with 55-wt% Al. Specific impulse efficiencies for the 55-wt% RP-1/Al of 67%-83% were obtained at a 2.4:1 expansion ratio. Injector erosion was evident with the 55-wt% testing, while there was little or no erosion seen with the gelled RP-1 with 0- and 5-wt% Al. A protective layer of gelled fuel formed in the firings that minimized the damage to the rocket injector face. This effect may provide a useful technique for engine cooling. These experiments represent a first step in characterizing the performance of and operational issues with gelled RP-1 fuels.

Palaszewski, Bryan↗

NASA NTRS1994

Metallized gelled propellants: Oxygen/RP-1/aluminum combustion experiments

A series of combustion experiments using metallized gelled liquid propellants were conducted. These experiments used a small 30- to 40-lb(sub f) thrust engine composed of a modular injector, igniter, chamber and nozzle. The fuels used were traditional liquid RP-1 and gelled RP-1 with 0-wt percent, 5-wt percent, and 44-wt percent loadings of aluminum and gaseous oxygen and the oxidizer. Ten different injectors were used during the testing: 6 were for the baseline O2/RP-1 tests and 4 for the gelled fuels. Relatively high C-star efficiencies were obtained with gelled RP-1 (0-wt% RP-1/Al) and metallized 5-wt% RP-1/Al over the O/F range tested: 90-98%. A peak of 98 percent efficiency was reached with ungelled O2/RP-1 and up to 95% efficiency was obtained with gelled RP-1/Al (55-wt% Al). Injector erosion was evident with the 55-wt% testing, while there was little or no erosion seen with the gelled RP-1 with 0 and 5-wt% Al. A protective layer of gelled fuel formed in the firings that minimized the damage to the rocket injector face. This effect may provide a useful technique for engine cooling.

Palaszewski, Bryan↗

NASA NTRS1994

Cryogenic Gellant and Fuel Formulation for Metallized Gelled Propellants: Hydrocarbons and Hydrogen with Aluminum

An experimental program to determine the viability of nanoparticulate gellant materials for gelled hydrocarbons and gelled liquid hydrogen was conducted. The gellants included alkoxides (BTMSE and BTMSH) and silica-based materials. Hexane, ethane, propane and hydrogen were gelled with the newly-formulated materials and their rheological properties were determined: shear stress versus shear rate and their attendant viscosities. Metallized hexane with aluminum particles was also rheologically characterized. The propellant and gellant formulations were selected for the very high surface area and relatively-high energy content of the gellants. These new gellants can therefore improve rocket engine specific impulse over that obtained with traditional cryogenic-fuel gellant materials silicon dioxide, frozen methane, or frozen ethane particles. Significant reductions in the total mass of the gellant were enabled in the fuels. In gelled liquid hydrogen, the total mass of gellant was reduced from 10-40 wt percent of frozen hydrocarbon particles to less that 8 wt percent with the alkoxide.

Wong, Wing↗

NASA NTRS1994

Lunar missions using advanced chemical propulsion: System design issues

To provide the transportation of lunar base elements to the moon, large high-energy propulsion systems will be required. Advanced propulsion systems for lunar missions can provide significant launch mass reductions and payload increases. These mass reductions and added payload masses can be translated into significant launch cost savings for the lunar base missions. The masses in low Earth orbit (LEO) were compared for several propulsion systems: nitrogen tetroxide/monomethyl hydrazine (NTO/MMH), oxygen/methane (O2/CH4), oxygen/hydrogen (O2/H2), and metallized O2/H2/Al propellants. Also, the payload mass increases enabled with O2/H2 and O2/H2/Al systems were addressed. In addition, many system design issues involving the engine thrust levels, engine commonality between the transfer vehicle and the excursion vehicle, and the number of launches to place the lunar mission vehicles into LEO will be discussed. Analyses of small lunar missions launched from a single STS-C flight are also presented.

TRT-THEORETICAL↗

NASA NTRS1993

Technology for gelled liquid cryogenic propellants - Metallized hydrogen/aluminum

The theoretical basis for solid-loaded or densified liquid hydrogen propellants for advanced space applications is outlined. Metallized propellants make it possible to increase the safety of propulsion systems as well as the payloads of future vehicles. Nanogellant formulated liquid hydrogen gels and other fuel gels are characterized by excellent settling stability, low yield point, and a high shear thinning index which makes them attractive for propulsion applications.

Starkovich, John↗

NASA NTRS1993

Space transportation alternatives for large space programs - The International Space University summer session - 1992

The issues discussed in this paper are the result of a 10-week study by the Space Solar Power Program design project members and the Space Transportation Group at the International Space University (ISU) summer session of 1992 to investigate new paradigms in space propulsion and how those paradigms might reduce the costs for large space programs. The program plan was to place a series of power satellites in Earth orbit. Several designs were studied where many kW, MW or GW of power would be transmitted to Earth or to other spacecraft in orbit. During the summer session, a space solar power system was also detailed and analyzed. At ISU, the focus of the study was to foster and develop some of the new paradigms that may eliminate the barriers to low cost for space exploration and exploitation. Many international and technical aspects of a large multinational program were studied. Environmental safety, space construction and maintenance, legal and policy issues of frequency allocation, technology transfer and control and many other areas were addressed.

Palaszewski, Bryan↗

NASA NTRS1993

Atomic hydrogen propellants: Historical perspectives and future possibilities

Atomic hydrogen, a very high density free-radical propellant, is anticipated to generate a specific impulse of 600-1500 lb-f sec/lb-mass performance; this may facilitate the development of unique launch vehicles. A development status evaluation is presently given for atomic hydrogen investigations. It is noted that breakthroughs are required in the production, storage, and transfer of atomic hydrogen, before this fuel can become a viable rocket propellant.

Palaszewski, Bryan↗

NASA NTRS1993

Atomic hydrogen propellants - Historical perspectives and future possibilities

Palaszewski, Bryan↗

NASA NTRS1992

Metallized propellants for the human exploration of Mars

An evaluation is conducted of the use of novel, metallized-propellant propulsion systems to reduce launch masses for manned Mars missions on the basis of density and I(sp) enhancements. The use of metallized propellants leads to a 3.3 percent LEO mass saving which represents 38,000 kg less than O2/H2 propulsion. Attention is given to the possibility of using space-storable propellants for the Mars excursion vehicle, as an alternative to the storing of cryogenic H2 on Mars, albeit at the cost of lower I(sp).

Palaszewski, Bryan↗

NASA NTRS1992

Electric propulsion for lunar exploration and lunar base development

Using electric propulsion to deliver materials to lunar orbit for the development and construction of a lunar base was investigated. Because the mass of the base and its life-cycle resupply mass are large, high specific impulse propulsion systems may significantly reduce the transportation system mass and cost. Three electric propulsion technologies (arcjet, ion, and magnetoplasmadynamic (MPD) propulsion) were compared with oxygen/hydrogen propulsion for a lunar base development scenario. Detailed estimates of the orbital transfer vehicles' (OTV's) masses and their propellant masses are presented. The fleet sizes for the chemical and electric propulsion systems are estimated. Ion and MPD propulsion systems enable significant launch mass savings over O2/H2 propulsion. Because of the longer trip time required for the low-thrust OTV's, more of them are required to perform the mission model. By offloading the lunar cargo from the manned O2/H2 OTV missions onto the electric propulsion OTV's, a significant reduction of the low Earth orbit (LEO) launch mass is possible over the 19-year base development period.

Palaszewski, Bryan↗

NASA NTRS1992

Space System Architecture Code

Space System Architecture Code (SSAC) program performs sensitivity studies on operating parameters of space missions. SSAC examines effects of variations in sizes of crews of piloted missions, chemical vs. nuclear electric propulsion, and specific impulse. Written in FORTRAN 77.

Jan, Darrell L.↗

NASA NTRS1991

Design issues for propulsion systems using metallized propellants

Metallized propellants are liquid propellants that contain metal particles. These particles are suspended in a gelled fuel or oxidizer. Aluminum is used as the metal additive. The addition of metal to conventional propellants can increase their specific impulse and their density over conventional propellants, and consequently, the payload delivered on Mars and lunar transportation vehicles, Earth-to-Orbit vehicles and upper stages for robotic planetary missions. Gelled fuels also provide increased safety during accidental propellant leakage or spills. To take full advantage of these potential performance increases, there are changes that must be made to the vehicle design. The differences are discussed between metallized propellant and traditional liquid propellants and their effect on the propulsion system design. These differences include the propellant density, mixture ratio, engine performance, and propellant rheology. Missions related to the Space Exploration Initiative are considered as design examples to illustrate these issues.

Palaszewski, Bryan↗

NASA NTRS1991

Launch vehicle performance using metallized propellants

Metallized propellant propulsion systems are considered as replacements for the solid rocket boosters and liquid sustainer stages on the current launch vehicles: both the Space Transportation System (STS) and the Titan 4. Liquid rocket boosters for the STS were analyzed as replacements for current solid rocket boosters. These boosters can provide a liquid propulsion system within the volume constraints of a solid rocket booster. A replacement for the Space Shuttle Main Engines using metallized 02/H2/A1 was studied. The liquid stages of the Titan 4 were also investigated; the Aerozine-50 (A-50) fuel was replaced with metallized storable A-50/A1. A metallized propellant is similar to a traditional liquid propellant. However, it has metal particles, such as aluminum, that are suspended in a gelled fuel, such as hydrogen, RP-1, A-50 or monomethyl hydrazine (MMH). The fuels then undergo combustion with liquid oxygen or nitrogen tetroxide (NTO). These propellants provide options for increasing the performance of existing launch vehicle chemical propulsion systems by increasing fuel density or specific impulse or both. These increases in density and specific impulse can significantly reduce the propulsion system liftoff weight and allow a liquid rocket booster to fit into the same volume as an existing solid rocket booster. Also, because gelled fuels are akin to liquid propellants, metallized systems can provide enhanced controllability over solid propulsion systems. Gelling of the propellant also reduces the sensitivity to impacts and consequently reduces the propellant explosion hazard.

Palaszewski, Bryan↗

NASA NTRS1991

Lunar missions using chemical propulsion: System design issues

To transport lunar base elements to the Moon, large high-energy propulsion systems will be required. Advanced propulsion systems for lunar missions can significantly reduce launch mass and increase the delivered payload, resulting in significant launch cost savings. In this report, the masses in low Earth orbit (LEO) are compared for several propulsion systems: nitrogen tetroxide/monomethyl hydrazine (NTO/MMH), oxygen/methane (O2/CH4), oxygen/hydrogen (O2/H2), and metallized O2/H2/Al propellants. Also addressed are payload mass increases enabled with these systems; system design issues involving the engine thrust levels, engine commonality between the transfer vehicle and the excursion vehicle; the number of launches to place the lunar mission vehicles into LEO; and analyses of small lunar missions launched from a single Space Transportation System-Cargo (STS-C) flight.

Palaszewski, Bryan↗

NASA NTRS1991

Design issues for propulsion systems using metallized propellants

Palaszewski, Bryan↗

NASA NTRS1990

Lunar missions using advanced chemical propulsion - System design issues

In this paper, the masses in low earth orbit (LEO) were compared for several propulsion systems: nitrogen tetroxide/monomethyl hydrazine, oxygen/methane, oxygen/hydrogen, and metallized O2/H2/Al propellants. Also, the payload mass increases enabled with these systems were addressed. In addition, many system design issues involving the engine thrust levels, engine commonality between the transfer vehicle and the excursion vehicle, and the number of launches to place the lunar mission vehicles into LEO are discussed. Analyses of small lunar missions launched from a single STS-C flight are also presented.

Palaszewski, Bryan↗

NASA NTRS1989

Lunar transfer vehicle design issues with electric propulsion systems

This paper describes parametric design studies of electric propulsion lunar transfer vehicles. In designing a lunar transfer vehicle, selecting the 'best' operating points for the design parameters allows significant reductions in the mass in low earth orbit (LEO) for the mission. These parameters include the specific impulse, the power level, and the propulsion technology. Many of the decisions regarding the operating points are controlled by the propulsion and power system technologies that are available for the spacecraft. The relationship between these technologies is discussed and analyzed here. It is found that both ion and MPD propulsion offer significant LEO mass reductions over O2/H2 for lunar transfer vehicle missions. The recommended operating points for the lunar transfer vehicle are an I(sp) of 5000 lb(f)-s/lb(m) and a 1 MW power level. For large lunar missions, krypton may be the best choice for ion propulsion.

Palaszewski, Bryan↗

NASA NTRS1989

Electric Propulsion for Manned Mars Exploration

Advanced high-power electric propulsion systems can significantly enhance piloted Mars missions. An increase in the science payload delivered to Mars and the reduction of the total Earth-departure mass are the major system-level benefits of electric propulsion. Other potential benefits are the return of the cargo vehicle to Earth orbit and the availability of high power in Mars orbit for high-power science and communications. Parametric analyses for sizing the cargo mission vehicle for Mars exploration missions are presented. The nuclear-electric propulsion system thruster size, power level, mass, propellant type and payload mass capability are considered in these system-level trade studies. Descriptions of the propulsion system selection issues for both ion and MPD thruster technologies are also discussed. On a manned Mars mission, the total launch mass for an unmanned cargo vehicle in low earth orbit (LEO) can be reduced by up to 50 percent over the baseline oxygen/hydrogen propulsion system. Because the cargo vehicle is sent to Mars prior to the manned mission, the trip time for the vehicle is not a critical factor. By taking advantage of the high specific impulse (I sub sp) of an ion or a Magneto-Plasma-Dynamic (MPD) thruster system, the total LEO mass is reduced from 590,000 kg for the oxygen/hydrogen propulsion system to 309,000 kg for the MPD system and 295,000 kg for the ion system. Many factors must be analyzed in the design of a electric propulsion Mars cargo vehicle. The propellant selection, the number of thrusters, the power level and the specific impulse are among the most important of the parameters. To fully address the electric propulsion system design, trade studies for the differing ion and MPD propulsion system configurations (thruster power levels, number of thrusters, propellants and power systems) must be conducted.

Palaszewski, Bryan↗