Search NASA⌕ Search

Engineering topics

Papin, Pallas A.

Publications and source records attributed to Papin, Pallas A..

Microstructure and Mechanical of U-6Nb and U-8Nb in Gamma Quenched and Long-Term Aged Conditions

This report documents the mechanical response and associated microstructure in a number of recent Los Alamos studies of U-6Nb and U-8Nb alloys in the as-quenched and artificially aged conditions, to serve as a primary data reference. Quasi-static tensile and hardness data (in the form of averages) are reported along with microstructures revealed by light optical and scanning electron microscopy. Total elongation data were converted to a common standard for ease of comparison of data from different tensile specimen geometries. A variety of alternate measures of total tensile elongation confirmed the trends one would find from considering only extensometer data. The various U-Nb material pedigrees and experimental conditions are as follows. Y-12-produced U-6Nb as quenched – effect of machining damage as quenched – effect of extensometer length 200oC ages for up to 22 days Rocky Flats-produced U-6Nb 40, 65, and 90oC ages for up to 10 years 300, 350, and 400°C ages for up to 1.2 years Los Alamos-produced nonbanded U-5.6Nb and U-7.7Nb variety of ages over 100-600°C for up to 5 years We characterized the chemical banding by microprobe and Knoop microhardness surveyed over long regions in a dozen Y-12 U-6Nb specimens. As expected, the light-vs.-dark imaging response (both by light optical and scanning electron microscopy) correlated well with the local wt.% Nb. However, the hardness did not correlate well with either imaging or microprobe, and hence cannot be used to predict the local wt.% Nb.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Update on Fabrication of Extrusions for TREAT Trade Study

This supplemental report describes fuel fabrication efforts conducted for the Idaho National Laboratory Trade Study for the TREAT Conversion project that is exploring the replacement of the HEU (Highly Enriched Uranium) fuel core of the TREAT reactor with LEU (Low Enriched Uranium) fuel. Previous reports have documented fabrication of fuel by the “upgrade” process developed at Los Alamos National Laboratory. These experiments supplement an earlier report that describes efforts to increase the graphite content of extruded fuel and minimize cracking.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fabrication of TREAT Fuel with Increased Graphite Loading

As part of the feasibility study exploring the replacement of the HEU fuel core of the TREAT reactor at Idaho National Laboratory with LEU fuel, this study demonstrates that it is possible to increase the graphite content of extruded fuel by reformulation. The extrusion process was use to fabricate the “upgrade” core1 for the TREAT reactor. The graphite content achieved is determined by calculation and has not been measured by any analytical method. In conjunction, a technique, Raman Spectroscopy, has been investigated for measuring the graphite content. This method shows some promise in differentiating between carbon and graphite; however, standards that would allow the technique to be calibrated to quantify the graphite concentration have yet to be fabricated. Continued research into Raman Spectroscopy is on going. As part of this study, cracking of graphite extrusions due to volatile evolution during heat treatment has been largely eliminated. Continued research to optimize this extrusion method is required.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Canless HIP Development for Aluminum Cladding of LEU Fuel Foils using Electron Beam Welding

The conventional canning method for HIP processing of fuel foils requires that foil assemblies be stacked within a stainless steel can, which is then welded shut and the internal air evacuated. A few of the detracting aspects associated with this method include i) the time required to hand construct and disassemble each can, ii) the possibility for bonding between adjacent foil assemblies and backing plates, and iii) the generation of large volumes of contaminated waste (can material and backing plates) that must be disposed. The new “canless” HIP approach discussed in this report involves the hermetic sealing of individual foil assemblies by electron beam welding their outer perimeter. A foil assembly consists of a zirconium-clad LEU (U-10Mo) foil sandwiched between two aluminum 6061 plates. Hermetic sealing is accomplished by making 4 intersecting aluminum-to-aluminum, full-penetration lap welds as shown in Figure 1. Since welds are made in a hard vacuum (10-5 torr), there is no need for a separate air evacuation step. The fuel itself sits within a pocket machined into one of the aluminum plates. Multiple foil assemblies welded in this manner can then be placed in a HIP fixture and batch processed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Characterization of Depleted-Uranium Strength and Damage Behavior

The intent of this report is to document the status of our knowledge of the mechanical and damage behavior of Depleted Uranium(DU hereafter). This report briefly summaries the motivation of the experimental and modeling research conducted at Los Alamos National Laboratory(LANL) on DU since the early 1980’s and thereafter the current experimental data quantifying the strength and damage behavior of DU as a function of a number of experimental variables including processing, strain rate, temperature, stress state, and shock prestraining. The effect of shock prestraining on the structure-property response of DU is described and the effect on post-shock mechanical behavior of DU is discussed. The constitutive experimental data utilized to support the derivation of two constitutive strength (plasticity) models, the Preston-Tonks-Wallace (PTW) and Mechanical Threshold Stress (MTS) models, for both annealed and shock prestrained DU are detailed and the Taylor cylinder validation tests and finite-element modeling (FEM) utilized to validate these strength models is discussed. The similarities and differences in the PTW and MTS model descriptions for DU are discussed for both the annealed and shock prestrained conditions. Quasi-static tensile data as a function of triaxial constraint and spallation test data are described. An appendix additionally briefly describes low-pressure equation-of-state data for DU utilized to support the spallation experiments. The constitutive behavior of DU screw/bolt material is presented. The response of DU subjected to dynamic tensile extrusion testing as a function of temperature is also described. This integrated experimental technique is planned to provide an additional validation test in the future. The damage data as a function of triaxiality, tensile and spallation data, is thereafter utilized to support derivation of the Tensile Plasticity (TEPLA) damage model and simulations for comparison to the DU spallation data are presented. Finally, a discussion of future needs in the area of needed DU strength and damage research at LANL is presented to support the development of physically-based predictive strength and damage modeling capability.

36 MATERIALS SCIENCE↗

The Surprising Occurrence of Non-Steady-State Growth of Divergent Lamellar Decomposition Products in Uranium-Niobium Alloys: A Preliminary Report

Metastable materials are all expected to decompose sooner or later, but sometimes the kinetic paths they travel confound standard textbook explanations. Such is the case for supersaturated uranium-niobium alloy microstructures that transform to lamellar products in the 300-647 ºC temperature range. An experimental study of these isothermal transformation kinetics is reported here for U-5.5Nb and U-7.5Nb alloys. About 85 specimens from each alloy were isothermally aged at eight temperatures for durations spanning five orders of magnitude, up to two years. The volume fractions and growth rates of fine-spacing discontinuous precipitation (DP) and coarse-spacing discontinuous coarsening (DC) lamellar reaction products were directly measured by quantitative metallography. This study was enhanced by explicit consideration of the DP initiation site during measurements: (1) prior matrix grain boundaries (the usual site found in every alloy that produces DP) and (2) carbide inclusions (a rarely-encountered site). This constitutes the first systematic study of inclusion-nucleated DP in any alloy system. The growth rates were measured by the robust method of Cahn and Hagel (1963). The measurements were taken across the entire span of fraction transformed, giving the best opportunity to discriminate between typical vs. anomalous growth behavior. In both alloys the growth rates for DP and DC are constant at the lowest aging temperatures (300-400ºC), in line with standard explanations. The growth rates, however, noticeably diminish with reaction time at the higher aging temperatures (450-625ºC), dropping by an order of magnitude or more. These results corroborate as-yet unpublished data of divergent lamellar spacings (i.e., increase of the spacing with reaction time) observed at the same higher aging temperatures. These surprising results are rationalized in terms of kinetic competition for chemical driving force between the lamellar and precursor nonlamellar reactions on comparable time scales. In previous studies divergent lamellar products occurred only in transformations involving diffusion of both interstitial and substitutional elements. Since the same phenomena are now seen in a purely substitutional system like U-Nb, it is likely that divergent and time-varying lamellar reactions may be more prevalent in other substitutional alloy systems than previously thought.

36 MATERIALS SCIENCE↗

Cameco UO 3 Materials Analysis

Uranium trioxide (UO 3 ) was characterized using a variety of techniques to better understand its physical properties. Scanning electron microscope (SEM) images were collected to examine particle morphology, which consisted of semi-spherical particles that tended to agglomerate before sonication. Particle size analysis revealed a singular mode distribution with a mean particle size of 43.0 {micro}m. After sonication a bimodal distribution was produced with peak particle sizes at 0.226 μm and 9.43 μm. The O/U ratio was measured to be 3.09 by Cameco in 2009, by gravimetric analysis. X-ray diffraction (XRD) showed that the sample was mostly Υ-UO 3 (87.1%) with a small amount of UO 3 ̣ 0.80 H 2 O (12.9%). Bulk and tap densities were determined to be 3.678 ±} 0.2 and 4.81 ± 0.2 g/cm 3 }, respectively (crystalline density is 7.3 g/cm 3 ). The stoichiometry was measured to be 2.99 in 2012.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Chemical analysis of uranium-niobium alloys by wavelength dispersive spectroscopy at the sigma complex

Uranium-niobium alloys play an important role in the nation's nuclear stockpile. It is possible to chemically quantify this alloy at a micron scale by using a technique know as wavelength dispersive spectroscopy. This report documents how this technique was used and how it is possible to reproduce measurements of this type. Discussion regarding the accuracy and precision of the measurements, the development of standards, and the comparison of different ways to model the matrices are all presented.

36 MATERIALS SCIENCE↗