Search NASA⌕ Search

Engineering topics

Pathak, Arjun K.

Publications and source records attributed to Pathak, Arjun K..

At least 37 records · Page 2

Unprecedented generation of 3D heterostructures by mechanochemical disassembly and re-ordering of incommensurate metal chalcogenides

Three-dimensional heterostructures are usually created either by assembling two-dimensional building blocks into hierarchical architectures or using stepwise chemical processes that sequentially deposit individual monolayers. Both approaches suffer from a number of issues, including lack of suitable precursors, limited reproducibility, and poor scalability of the preparation protocols. Therefore, development of alternative methods that enable preparation of heterostructured materials is desired. We create heterostructures with incommensurate arrangements of well-defined building blocks using a synthetic approach that comprises mechanical disassembly and simultaneous reordering of layered transition-metal dichalcogenides, MX 2 , and non-layered monochalcogenides, REX, where M = Ta, Nb, RE = Sm, La, and X = S, Se. We show that the discovered solid-state processes are rooted in stochastic mechanochemical transformations directed by electronic interaction between chemically and structurally dissimilar solids toward atomic-scale ordering, and offer an alternative to conventional heterostructuring. Details of composition–structure–properties relationships in the studied materials are also highlighted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-order magnetic phase transition in P r 2 In with negligible thermomagnetic hysteresis

Magnetic first-order phase transitions are key for the emergence of functionalities of fundamental and applied significance, including magnetic shape memory as well as magnetostrictive and magnetocaloric effects. Such transitions are usually associated with thermomagnetic hysteresis. In this paper we report the observation of a firstorder transition in Pr 2 In from a paramagnetic to a ferromagnetic state at $T_C$ = 57K without a detectable thermomagnetic hysteresis, which is also accompanied by a large magnetocaloric effect. The peculiar electronic structure of Pr2In exhibiting a large density of states near the Fermi energy explains the highly responsive magnetic behavior of the material. The magnetic properties of Pr 2 In are reported, including observation of another (second-order) magnetic transition at 35 K.

36 MATERIALS SCIENCE↗

Extreme ultraviolet time- and angle-resolved photoemission setup with 21.5 meV resolution using high-order harmonic generation from a turn-key Yb:KGW amplifier

Characterizing and controlling electronic properties of quantum materials require direct measurements of nonequilibrium electronic band structures over large regions of momentum space. Here, we demonstrate an experimental apparatus for time- and angle-resolved photoemission spectroscopy using high-order harmonic probe pulses generated by a robust, moderately high power (20 W) Yb:KGW amplifier with a tunable repetition rate between 50 and 150 kHz. By driving high-order harmonic generation (HHG) with the second harmonic of the fundamental 1025 nm laser pulses, we show that single-harmonic probe pulses at 21.8 eV photon energy can be effectively isolated without the use of a monochromator. The on-target photon flux can reach 5 × 1010 photons/s at 50 kHz, and the time resolution is measured to be 320 fs. The relatively long pulse duration of the Yb-driven HHG source allows us to reach an excellent energy resolution of 21.5 meV, which is achieved by suppressing the space-charge broadening using a low photon flux of 1.5 × 108 photons/s at a higher repetition rate of 150 kHz. The capabilities of the setup are demonstrated through measurements in the topological semimetal ZrSiS and the topological insulator Sb2−xGdxTe3.

Liu, Yangyang↗

Magnetic and transport behaviors of non-centrosymmetric Nd 7 Ni 2 Pd

Crystallographic, magnetic, electrical transport and thermodynamic properties of pseudo-binary Nd 7 Ni 2 Pd compound have been studied using temperature-dependent x-ray powder diffraction and physical property measurements. Compared to the ferromagnetic parent Nd 7 Pd 3 , the ground state of Nd 7 Ni 2 Pd is antiferromagnetic, and it exhibits strong metamagnetism. The measurements indicate two antiferromagnetic transitions in fields less than 8 kOe: a second-order paramagnetic to antiferromagnetic at T N2 = 29 K and a weak first-order antiferromagnetic to antiferromagnetic transition at T N1 = 24.5 K. Here, the compound becomes ferromagnetic in fields of 8 kOe and higher with T C = 30 K. Temperature dependence of lattice parameters is anomalous, most prominently in the basal plane at ~30 K; however, there is no detectable structural distortion or clear volume discontinuity around 25 K, suggesting a significant weakening of the first-order transition when compared to the binary Nd 7 Pd 3 .

36 MATERIALS SCIENCE↗

Managing hysteresis of Gd 5 Si 2 Ge 2 by magnetic field cycling

The influence of magnetic field cycling through the first-order magnetostructural transformation on the magnetic and magnetocaloric properties, as well as hysteresis of polycrystalline Gd 5 Si 2 Ge 2 , has been studied using magnetometry. Here, the cycling has a minimal effect on the magnetic field-induced entropy change and the phase transformation temperature of the material. On the other hand, magnetic hysteresis decreases by 30% after approximately ten cycles and remains low unless the sample is moved far into the paramagnetic regime. Factors playing a role in the history dependence of hysteresis have been discussed.

36 MATERIALS SCIENCE↗

Designed materials with the giant magnetocaloric effect near room temperature

The coupling between structural and magnetic degrees of freedom is crucial for realization of interesting physical phenomena associated with magneto-structural transformations resembling austenite-to-martensite transitions. Despite substantial efforts in design and discovery of materials with strong magnetocaloric effects, a majority of viable candidates are composed of non-earth-abundant and toxic elements, while others involve challenging syntheses and post processing. Here, guided by advanced density functional theory calculations, we report a new family of compounds, i.e., Mn 0.5 Fe 0.5 NiSi 1-x Al x [x = 0.045–0.07] exhibiting a giant magnetocaloric effect (MCE) that is tunable near room temperature. Their MCE functionality arises from a distinct magneto-structural transformation between a paramagnetic hexagonal Ni 2 In-type phase and ferromagnetic orthorhombic TiNiSi-type phase that can be actuated by magnetic field and/or pressure. As the transition is sensitive to external hydrostatic pressure, the same materials should also exhibit a strong barocaloric response in addition to the giant MCE.

36 MATERIALS SCIENCE↗

Anisotropy and orbital moment in Sm-Co permanent magnets

Structural and magnetic properties of iron-free and iron-substituted SmCo 5 have been investigated theoretically and experimentally. The nanocrystalline ribbons of SmCo 5–x Fe x (0 ≤ x ≤ 2), which were produced by rapid solidification, crystallize in the hexagonal CaCu5 structure for x ≤ 0.75. Small Fe additions (x = 0.25) substantially improve the coercivity, from 0.45 to 2.70 T, which we interpret as combined intrinsic and extrinsic effect. Most of our findings are consistent with past samarium-cobalt research, but some are at odds with findings that have seemingly been well established through decades of rare-earth transition-metal research. In particular, our local spin-density approximation with Hubbard parameter calculations indicate that the electronic structure of the Sm atoms violates Hund's rules and that the orbital moment is strongly quenched. Possible reasons for the apparent disagreement between theory and experiment are discussed. Here, we explicitly determine the dependence of the Sm 4$f$ charge distribution, arguing that an accurate density-functional description of SmCo 5 is a challenge to future research.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Giant enhancement of the magnetocaloric response in Ni–Co–Mn–Ti by rapid solidification

Magnetocaloric refrigeration is a solid-state cooling approach that assures high energy efficiency and low environmental impact. It remains uncompetitive with conventional vapor-compression technologies due to lack of high-performing materials that exhibit large magnetocaloric effects in low magnetic fields. In this work we report a game-changing enhancement of the magnetocaloric response in a transition-metal-based Ni–Co–Mn–Ti. Mechanically and chemically stable rapidly solidified ribbons exhibit magnetic entropy changes as high as ~27J·kg –1 K –1 for a moderate field change of 2T, comparable to or larger than the best known materials for near-room temperature applications. The ribbons can be easily manufactured in large quantities and the transition temperature can be adjusted by varying Co concentration.

36 MATERIALS SCIENCE↗

Formation, Stability and Magnetism of New Gd 3 TAl 3 Ge 2 Quaternary Compounds (T = Mn, Cu)

A study on the formation and stability of new quaternary compounds with the general chemical formula Gd 3 TAl 3 Ge 2 (T = Mn, Cu) has been undertaken by experimental investigations (SEM-EDX, DTA and XRD) and density functional theory (DFT) calculations. These compounds crystallize in the hexagonal Y 3 NiAl 3 Ge 2 -type structure (hP9, P–62m, Z = 1) (an ordered, quaternary derivative of the ternary ZrNiAl or of the binary Fe 2 P prototypes), with lattice parameters values a = 7.0239(2) Å and c = 4.2580(1) Å for Gd 3 MnAl 3 Ge 2 and a = 7.0434(1) Å and c = 4.2089(1) Å for Gd 3 CuAl 3 Ge 2 . DTA suggests a peritectic reaction for the formation of these compounds (at 1245°C for Gd 3 CuAl 3 Ge 2 ). The existence and stability of these phases has been explained on the basis of DFT calculations, and a comparison of ground state properties of the studied compounds with the earlier known Gd 3 CoAl 3 Ge 2 phase is outlined. The negative formation energies in all three cases govern the stability of compounds from theory as well, predicting Gd 3 MnAl 3 Ge 2 as the most stable phase with highest formation energy (–13.01 eV/f.u.). The total DOS are generic in nature and suggest the robust magnetism, with the Gd-f moments of ≈7 μ B . An antiparallel coupling among Gd-f and T-d states is observed for all compounds, as usually seen in rare earth (R) - transition metal (T) compounds. Preliminary magnetization measurements on Gd 3 MnAl 3 Ge 2 show two ferromagnetic/ferrimagnetic (FM/FIM) like transitions at T C1 = 142 K and T C2 = 97 K, with another anomaly seen at ≈15 K. Isothermal magnetization data show no hysteresis even at 5 K, and the magnetization does not saturate up to 50 kOe, further suggesting a possible FIM behavior.

36 MATERIALS SCIENCE↗

Growth of PrCo 2 single crystals with a Boron Nitride crucible

Single crystals of PrCo 2 have been grown from flux starting from Pr 0.44 Co 0.56 that was synthesized by arc melting of stoichiometric mixtures of the elements. The Pr 0.44 Co 0.56 ingot was loaded in a Boron Nitride (BN) crucible and sealed inside a quartz tube under vacuum. The quartz ampoule was heated to 1203 K, and then slowly cooled down to 923 K at a rate of 2 K/h. The obtained crystals have octahedral shapes and are of cubic C15 Laves phase structure confirmed by room temperature powder and single-crystal X-ray diffraction measurements. Magnetic susceptibility data show the Curie temperature T C = 46.7 K. The experimental value of saturation magnetization M s = 3.2 μ B /f.u is consistent with our theoretical calculations.

36 MATERIALS SCIENCE↗

Anomalous specific heat and magnetic properties of Tm x Dy 1-x Al 2 (0 ≤ x ≤ 1)

Here, we study crystal structure, phase transitions and magnetism of pseudo-binary Tm x Dy 1-x Al 2 (0 ≤ x ≤ 1) compounds using temperature dependent X-ray powder diffraction, specific heat and magnetization measurements, first principles, and model calculations. In low external magnetic fields, Dy-rich compounds undergo continuous, second-order phase transitions at the respective Curie temperatures, T C . In contrast, the Tm-rich compounds exhibit discontinuous, first-order anomalies in the magnetically ordered states. These sharp transitions correlate with a substantial energy difference between the room temperature cubic and ground state rhombohedral structures of TmAl 2 . A clear anomaly in the lattice parameter is observed at ~30 K for x = 0.5, which nearly coincides with T C = 31.2 K. The effective quadrupolar moment of the lanthanides changes sign around x = 0.5, which leads to a nearly zero anisotropy constant and approximately spherical effective 4f charge densities, providing an explanation for the lack of structural distortions below T C for x = 0.5. The calculations confirm [001] as the easy magnetization axis in the ground state tetragonal structure of DyAl 2 , and reveal collapse of the orbital magnetic moment when the easy magnetization direction changes to [111]. Within the rhombohedral ground state of TmAl 2 [111] is the easy magnetization direction.

36 MATERIALS SCIENCE↗

Multi-principal element transition metal dichalcogenides via reactive fusion of 3D-heterostructures

Transition metal dichalcogenides combining multiple principal elements in their structures are synthesized via mechanochemical exfoliation and spontaneous reassembly of binary precursors into 3D-heterostructures that are converted into single-phase layered materials by high-temperature reactive fusion. As a result, physical and chemical events enabling these transformations are summarized in the form of a conceivable reaction mechanism.

36 MATERIALS SCIENCE↗

Magnetostructural phase transitions and magnetocaloric effect in (Gd 5-x Sc x )Si 1.8 Ge 2.2

Future advancements in magnetocaloric refrigeration/heat pumping technologies depend on the discovery of new materials that demonstrate large, tunable magnetocaloric effects (MCEs) in the vicinity of coupled magnetic and structural phase transitions that occur reversibly with minimum hysteresis. Here, with this in mind, we investigate phase transitions, microstructure, magnetic, thermal, magnetocaloric, and transport properties of (Gd 5-x Sc x )Si 1.8 Ge 2.2 compounds. Replacement of magnetic Gd with non-magnetic Sc in Gd 5-x Sc x Si 1.8 Ge 2.2 increases the ferromagnetic to paramagnetic first order phase transition temperature, T C , with only a minor reduction in MCE when x ≤ 0.2. We also demonstrate that hydrostatic pressure further increases T C and reduces the hysteresis of the first order phase transition in Gd 4.8 Sc 0.2 Si 1.8 Ge 2.2 from 7 to 4 K. Temperature-dependent x-ray powder diffraction study of Gd 4.8 Sc 0.2 Si 1.8 Ge 2.2 confirms the monoclinic ↔ orthorhombic structural transformation at T C , in agreement with magnetic, calorimetric, and electrical transport measurements. In addition to the substantial magnetocaloric effect, a large magnetoresistance of ~20% is also observed in Gd 4.8 Sc 0.2 Si 1.8 Ge 2.2 for ΔH = 50 kOe in the vicinity of the magnetostructural transition. Finally, in a drastic reversal of the initial doping behavior further additions of Sc (x > 0.2) suppress formation of the monoclinic phase, change the nature of the transition from first-to second-order, and reduce both the transition temperature and magnetocaloric effect.

36 MATERIALS SCIENCE↗

Role of 4 f electrons in crystallographic and magnetic complexity

Here, the functionality of many magnetic materials critically depends on first manipulating and then taking advantage of highly nonlinear changes of properties that occur during phase transformations. Unique to lanthanides, property-defining 4f electrons are highly localized and, as commonly accepted, play little to no role in chemical bonding. Yet here we demonstrate that the competition between 4f-electron energy landscapes of Dy (4f 9 ) and Er (4f 11 ) is the key element of the puzzle required to explain complex interplay of magnetic and structural features observed in Er 1–x Dy x Co 2 , and likely many other mixed lanthanide systems. Unlike the parent binaries—DyCo 2 and ErCo 2 —Er 1–x Dy x Co 2 exhibits two successive magnetostructural transitions: a first order at TC, followed by a second order in the ferrimagnetically ordered state. Supported by first-principles calculations, our results offer new opportunities for targeted design of magnetic materials with multiple functionalities, and also provide a critical insight into the role of 4f electrons in controlling the magnetism and structure of lanthanide intermetallics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High performance Nd-Fe-B permanent magnets without critical elements

Scanning electron microscopy, and magnetization measurements reveal that as cast (Nd 1–x Ce x ) 2 Fe 14 B alloys contain significant amounts of α-Fe that can be dramatically reduced by annealing the alloys at 1000 °C for 3 days. The room temperature intrinsic coercivity, Hci, of (Nd 0.8 Ce 0.2 ) 2.2 Fe 14 B melt spun ribbons was found to be 11 kOe, which is ~32 to ~10% higher in comparison to that of Nd 2 Fe 14 B (Hci = 8.3 kOe), and (Nd 0.8 Ce 0.2 ) 2.0 Fe 14 B (Hci = 10 kOe), respectively. The substitution of Co for Fe in (Nd 0.8 Ce 0.2 ) 2 Fe 14–z Co z B significantly increases both TC and the maximum energy product, (BH)max. Our study shows that both Co-containing and Co-free Ce-substituted Nd 2 Fe 14 B alloys have excellent magnetic properties at room temperature and above. As a result, the experimental results also demonstrate the potential of Nd-Ce-Fe-TM-B based alloys as alternative to expensive Dy-containing high performance rare earth magnets.

36 MATERIALS SCIENCE↗

Magnetic properties of bulk, and rapidly solidified nanostructured (Nd 1-x Ce x ) 2 Fe 14-y Co y B ribbons

Magnetic properties of Ce and Co co-doped (Nd 1-x Ce x ) 2 Fe 14-y Co y B compounds have been investigated both in bulk polycrystalline and rapidly solidified nanostructured ribbon forms. For certain Ce concentrations the materials exhibit spin re-orientation transitions below 140 K. The Curie temperatures, saturation magnetizations, and other magnetic properties relevant for applications as permanent magnets are controlled by Ce and Co substitutions for Nd and Fe, respectively. Most importantly, the results show that Ce, Co co-doped compounds are excellent replacements for several Dy-based high performance permanent magnets (dysprosium is one of the critical elements and is, therefore, in short supply). As a result, the high temperature (>375 K) magnetic properties for Nd–Ce–Fe–Co–B based alloys show promise not only as a replacement for Dy-doped Nd 2 Fe 14 B permanent magnets, but the new alloys also require significantly lower amounts of Nd, which too is the critical element that can be replaced by a more abundant Ce.

36 MATERIALS SCIENCE↗

The structural and magnetic properties of Pr{sub 1−x}Er{sub x}Al{sub 2}

We report on the effect of Er addition to PrAl{sub 2} on the lattice parameters, magnetic behavior, heat capacity, and magnetocaloric effect by using x-ray diffraction, magnetization, and heat capacity measurements. Unlike Pr{sub 0.6}Er{sub 0.4}Al{sub 2}, other alloys we studied in the pseudobinary (Pr{sub 1−x}Er{sub x})Al{sub 2} system do not exhibit a sharp peak in heat capacity with the application of magnetic field. Both the cubic lattice parameter and the Curie temperature decrease with increasing Er concentration. The nuclear specific heat coefficient decreases from 660 mJ K mol{sup −1} for x = 0.05 to a nearly negligible value for x = 0.95. The magnetic entropy and adiabatic temperature change varies from 2 to 4 J mol{sup −1} K{sup −1} and 2.5 to 5 K at ΔH = 20 kOe for x = 0.05 to 0.95, respectively. These values of the magnetocaloric effect are comparable to those of the other rare-earth dialuminides systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗