Search NASA⌕ Search

Engineering topics

Poplawsky, Jonathan D.

Publications and source records attributed to Poplawsky, Jonathan D..

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Creep Behavior and Phase Equilibria in Model Precipitate Strengthened Alumina-Forming Austenitic Alloys

Abstract Creep-rupture behavior and microstructural response in alumina-forming austenitic (AFA) alloys with two different precipitation strengthening mechanisms, “Laves-phase + M 23 C 6 carbide” and “coherent L1 2 γ′-Ni 3 (Al,Ti),” were explored as “model” cases of multi-phase, multi-scale heat-resistant AFA alloys for 650–750°C use. These alloys will be used to guide and verify computational alloy design and life-prediction modeling under an on-going eXtremeMAT project through the Office of Fossil Energy and Carbon Management, US Department of Energy. Computational thermodynamics were used to design and predict the amounts of strengthening and deteriorating secondary phases at 750°C. Creep-rupture lives of the alloys tested at 750°C and 100 MPa were in a range of 4000–9000 h, and the microstructure at the gage/grip after creep-rupture testing was compared with isothermally aged alloys for 1500 h, as well as the calculated phases. Detailed microstructure characterization includes phase identification, volume fraction measurement, and compositional analysis, which were correlated with the creep-rupture properties. High-temperature oxidation resistance was also screened and compared with commercial, chromia-forming heat-resistant steels. These model alloys also provide the basis for further design and optimization of next generation AFA alloys with improved creep resistance.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ta-containing Fe-Ni based superalloys with high strength and oxidation resistance for high-temperature applications

A Fe—Ni based alloy comprising, in weight percent: Ni 30-35; Cr 12-14; Al 3-5; Ti 0-2; Ta 2-8; C<=0.05; B<=0.005; Zr<=0.2; Si<0.5; where Cr/(Cr+Fe+Ni)=0.125-0.145; Al/(Al+Ti+Ta)=0.15-0.5; and Fe≥Ni; balance Fe, the alloy having a face-centered cubic (fcc) matrix with from 25 to 30 vol. % of L12-type γ′-Ni3M (M=Al, Ta, Ti and mixtures thereof) precipitates.

Yang, Ying↗
DOE OSTI2022

Concurrent Precipitation of Nb(C,N) and Metastable M 23 C 6 in Alloy 347H at 700°C and 750°C: Computer Simulations and Comparison to Experiment

Here, we present our results for the concurrent precipitation of metastable M 23 C 6 , Nb(C,N) secondary precipitates, and the Nb(C,N) primary crystals in 347H austenitic stainless steel. For precipitation modeling, we have accounted for the elastic contribution to interfacial energy, and for the Fe-spin-polarization for NbC/Fe and M 23 C 6 /Fe interfacial energy values: for NbC/Fe ~ 0.63 J/m 2 . For M 23 C 6 precipitates, an error function was used to describe the interfacial energy growth with particle size. In precipitation simulations, the average size of the primary Nb(C,N) particles remained ~ 1 μm at 700°C and ~ 0.3 μm at 750°C. The M 23 C 6 precipitates at 750°C dissolved after 120 h (our simulations) compared to 300 h (experiments). The Nb(C,N)/Fe interfacial energy was not affected by the nitrogen additions. With these modifications, reasonable agreement with the available experimental data was obtained, which allows using them in the development of the 2nd-phase particle-informed creep theory.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A creep-resistant additively manufactured Al-Ce-Ni-Mn alloy

Existing additively manufactured aluminum alloys exhibit poor creep resistance due to coarsening of their strengthening phases and refined grain structures. In this paper, we report on a novel additively manufactured Al-10.5Ce-3.1Ni-1.2Mn wt.% alloy which displays excellent creep resistance relative to cast high-temperature aluminum alloys at 300–400 °C. In this work, the creep resistance of this alloy is attributed to a high volume fraction (~35%) of submicron intermetallic strengthening phases which are coarsening-resistant for hundreds of hours at 350 °C. The results herein demonstrate that additive manufacturing provides opportunities for development of creep-resistant aluminum alloys that may be used in bulk form in the 250–400 °C temperature range. Pathways for further development of such alloys are identified.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Biocompatibility of NbTaTiVZr with Surface Modifications for Osteoblasts

Here, we report a potential biomedical material, NbTaTiVZr, and the impact of surface roughness on the osteoblast culture and later behavior based on in vitro tests of preosteoblasts. Cell activities such as adhesion, viability, and typical protein activity on NbTaTiVZr showed comparable results with that of commercially pure Ti (CP-Ti). In addition, NbTaTiVZr with a smooth surface exhibits better cell adhesion, viability, and typical protein activity which shows that surface modification can improve the biocompatibility of NbTaTiVZr. This supports the biological evidence and shows that NbTaTiVZr can potentially be evaluated as a biomedical material for clinical use.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Understanding the microstructural stability in a y’-strengthened Ni-Fe-Cr-Al-Ti alloy

Ni-Fe-Cr-Al-Ti alloys, with Ni levels near 50 wt.%, have the potential to develop a microstructure consisting of a face-centered cubic ? matrix with the homogeneous precipitation of fine ordered ?’ precipitates similar to traditional Ni-based superalloys with significantly greater Ni content. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), atom probe tomography (APT), and CALPHAD -based thermodynamic modeling were employed to understand the phase stabilities and microstructural evolution in an age-hardenable Ni-27Fe-18Cr-1Co-1.6Al-3.75Ti-1.2Mo-0.03C (wt%) alloy. The primary heat-treatment of solution annealing at 1121°C for 4h and age-hardening treatment at 760 °C for 16h resulted in a microstructure consisting of fine ?’ precipitates in an austenitic matrix along with grain boundary carbides, consistent with thermodynamic calculations. Long-term aging at 900 °C for 250h resulted in the coarsening of ?’ along with a change in the morphology of the precipitates from spherical to a more cuboidal shape. In addition, ? phase formation was observed concomitant with the partial dissolution of the ?’ phase. The ability of computational thermodynamic models to predict microstructural characteristics is discussed.

Gwalani, Bharat↗
DOE OSTI2021

Superior High-Temperature Strength in a Supersaturated Refractory High-Entropy Alloy

Refractory high-entropy alloys (RHEA) show promising applications at high temperatures. However, achieving high strengths at elevated temperatures above 1,173K is still challenging due to heat softening. Using intrinsic material characteristics as the alloy-design principles, a single-phase body-centered-cubic (BCC) CrMoNbV RHEA with high-temperature strengths (beyond 1,000 MPa at 1,273 K) is designed, superior to other reported RHEAs as well as conventional superalloys. The origin of the high-temperature strength is revealed by in-situ neutron scattering, transmission-electron microscopy, and first-principles calculations. The CrMoNbV’s elevated-temperature strength retention up to 1,273 K arises from its large atomic-size and elastic-modulus mismatches, the insensitive temperature dependence of elastic constants, and the dominance of non-screw character dislocations caused by the strong solute pinning, which makes the solid-solution strengthening pronounced. The alloy-design principles and the insights in this study pave the way to design RHEAs with outstanding high-temperature strength.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High radiation tolerance of an ultrastrong nanostructured NiCoCr alloy with stable dispersed nanooxides and fine grain structure

The present paper reports the irradiation behavior of nanostructured NiCoCr medium entropy alloy enhanced by Y-Hf-O nanooxides and fine grains produced by powder metallurgy. Ion beam irradiation to a peak dose of 130 dpa at 580°C produced neither detectable void swelling nor irradiation-induced hardening, in contrast to significant void swelling and property degradation of single phase NiCoCr concentrated solid-solution alloy under the similar irradiation condition. The dispersed nanooxides and high density of grain boundaries act as defect sinks that effectively annihilate irradiation-induced interstitials and vacancies. Furthermore, high-density nanooxides maintain their crystalline structures and stabilize the grain boundaries during irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Gradient cell–structured high-entropy alloy with exceptional strength and ductility

We report that similar to conventional materials, most multicomponent high-entropy alloys (HEAs) lose ductility as they gain strength. In this study, we controllably introduced gradient nanoscaled dislocation cell structures in a stable single-phase HEA with face-centered cubic structure, thus resulting in enhanced strength without apparent loss of ductility. Upon application of strain, the sample-level structural gradient induces progressive formation of a high density of tiny stacking faults (SFs) and twins, nucleating from abundant low-angle dislocation cells. Furthermore, the SF-induced plasticity and the resultant refined structures, coupled with intensively accumulated dislocations, contribute to plasticity, increased strength, and work hardening. These findings offer a promising paradigm for tailoring properties with gradient dislocation cells at the nanoscale and advance our fundamental understanding of the intrinsic deformation behavior of HEAs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Strength can be controlled by edge dislocations in refractory high-entropy alloys

Energy efficiency is motivating the search for new high-temperature (high-T) metals. Some new body-centered-cubic (BCC) random multicomponent “high-entropy alloys (HEAs)” based on refractory elements (Cr-Mo-Nb-Ta-V-W-Hf-Ti-Zr) possess exceptional strengths at high temperatures but the physical origins of this outstanding behavior are not known. Here we show, using integrated in-situ neutron-diffraction (ND), high-resolution transmission electron microscopy (HRTEM), and recent theory, that the high strength and strength retention of a NbTaTiV alloy and a high-strength/low-density CrMoNbV alloy are attributable to edge dislocations. This finding is surprising because plastic flows in BCC elemental metals and dilute alloys are generally controlled by screw dislocations. We use the insight and theory to perform a computationally-guided search over 10 7 BCC HEAs and identify over 10 6 possible ultra-strong high-T alloy compositions for future exploration.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Elevated temperature ductility dip in an additively manufactured Al-Cu-Ce alloy

The deformation and failure mechanisms of Al-9Cu-6Ce (wt%) based alloys fabricated with laser powder bed fusion were investigated from room temperature to 400°C. The yield and ultimate tensile strengths decreased monotonically with increase in temperature, but the tensile elongation dipped unexpectedly at elevated temperatures and exhibited a minimum at 300°C. The dip in tensile elongation occurred with a concomitant dip in strain-rate sensitivity (SRS) of deformation. The as-fabricated alloy microstructure was heterogeneous, and the heat affected zone (HAZ) underneath the melt pool boundary was prone to strain localization. At 300 °C, the reduced SRS promoted the progression of strain localization in the HAZ leading to failure initiation and the dip in tensile elongation. Furthermore, a higher SRS or strain-hardening rate at other temperatures improved the tensile elongation by slowing the progression of strain localization in the HAZ such that failure initiated by other mechanisms elsewhere in the microstructure. Notably, the tensile elongation was limited by the defect structure only in a narrow temperature range (150 - 200 °C) while at other temperatures it was limited by the inherent microstructural features. This investigation exemplifies unexpected deformation and failure mechanisms possible in heterogeneous microstructures that result from additive manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The detrimental effect of elemental contaminants when using B additions to improve the creep properties of a Ni-based superalloy

The effect of Si contamination when using B to improve the creep properties of a Ni-based superalloy was investigated using advanced characterization techniques and first-principles simulations on alloys with high and low B levels with varying Si contents. The positive effect of B segregation along grain boundaries on the creep properties was mitigated by the presence of Si which showed a similar segregation preference. Density functional theory calculations were used for validation by calculating grain boundary cleavage energies. Silicon was shown to decrease grain boundary cohesion which offsets the positive effect of B.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Role of thermo-mechanical gyrations on the α/β interface stability in a Ti6Al4V AM alloy

Fluctuating energy distributions experienced during Additive Manufacturing yield an evolution of spatial and temporal transients within a part. In general, the in-situ monitoring of these transients is near to impossible during manufacturing. In order to then gain perspective into the impact on these localized thermo-mechanical transients on the interface stability, rapid thermo-mechanical reversals with known boundary conditions are imposed on an AM Ti6Al4V alloy which resulted in a phase transformation leading to an increased β phase stability. Our goal with this study is to comprehend the kinetics of this phase transformation with concepts of stored energy due to plastic strain accumulation and diffusion kinetics. Atom Probe Tomography is employed to study the partitioning of the solute elements across the interface. As expected, the thermo-mechanically cycled samples showed a reduced Vanadium concentration across the β phase. Finally, this concentration profile across the interface, alongside a full-width-half-max analysis, provided insight on the potential phase transformation kinetics involved in the α &rarr; β transformation subject to thermo- mechanical gyrations.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High-throughput design of high-performance lightweight high-entropy alloys

Developing affordable and light high-temperature materials alternative to Ni-base superalloys has significantly increased the efforts in designing advanced ferritic superalloys. However, currently developed ferritic superalloys still exhibit low high-temperature strengths, which limits their usage. Here we use a CALPHAD-based high-throughput computational method to design light, strong, and low-cost high-entropy alloys for elevated-temperature applications. Through the high-throughput screening, precipitation-strengthened lightweight high-entropy alloys are discovered from thousands of initial compositions, which exhibit enhanced strengths compared to other counterparts at room and elevated temperatures. The experimental and theoretical understanding of both successful and failed cases in their strengthening mechanisms and order-disorder transitions further improves the accuracy of the thermodynamic database of the discovered alloy system. This study shows that integrating high-throughput screening, multiscale modeling, and experimental validation proves to be efficient and useful in accelerating the discovery of advanced precipitation-strengthened structural materials tuned by the high-entropy alloy concept.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Bifunctional nanoprecipitates strengthen and ductilize a medium-entropy alloy

Single-phase high- and medium-entropy alloys with face-centred cubic (fcc) structure can exhibit high tensile ductility and excellent toughness, but their room-temperature strengths are low. Dislocation obstacles such as grain boundaries, twin boundaries, solute atoms and precipitates can increase strength. However, with few exceptions, such obstacles tend to decrease ductility. Interestingly, precipitates can also hinder phase transformations. Here, using a model, precipitate-strengthened, Fe–Ni–Al–Ti medium-entropy alloy, we demonstrate a strategy that combines these dual functions in a single alloy. The nanoprecipitates in our alloy, in addition to providing conventional strengthening of the matrix, also modulate its transformation from fcc-austenite to body-centred cubic (bcc) martensite, constraining it to remain as metastable fcc after quenching through the transformation temperature. During subsequent tensile testing, the matrix progressively transforms to bcc-martensite, enabling substantial increases in strength, work hardening and ductility. This use of nanoprecipitates exploits synergies between precipitation strengthening and transformation-induced plasticity, resulting in simultaneous enhancement of tensile strength and uniform elongation. Further, our findings demonstrate how synergistic deformation mechanisms can be deliberately activated, exactly when needed, by altering precipitate characteristics (such as size, spacing, and so on), along with the chemical driving force for phase transformation, to optimize strength and ductility.

36 MATERIALS SCIENCE↗