Search NASA⌕ Search

Engineering topics

Reece, Charles

Publications and source records attributed to Reece, Charles.

At least 55 records · Page 3

A New Internal Optical Profilometry System for Characterization of RF Cavity Surfaces - CYCLOPS

Jefferson Lab has received and is commissioning a new interferometric optical profilometer specifically designed to provide internal surface mapping of elliptical rf cavities. The CavitY CaLibrated Optical Profilometry System -CYCLOPS - provides better than 2 µm lateral resolution and 0.1 µm surface height resolution of programmatically selected locations on the interior surface of multi-cell cavities. The system is being used to provide detailed characterization of surface topographic evolution as a function of applied surface treatments and to investigate particular localized defects. We also intend to use the system for 3D mapping of actual interior rf surface geometry for feedback to structure design model and fabrication tooling. First uses will be illustrated. CYCLOPS was developed and fabricated by MicroDynamics Inc., Woodstock, GA, USA.

Reece, Charles↗

Development of Internal Non-Contacting Profilomerty Superconducting RF Cavities

Under the scope of this CRADA Microdynamics contributed only by transferring to JLab the control source code (on non-disclosure basis) for the CYCLOPS system that we purchased from them earlier. They invested no additional design or engineering time. They made the business decision that there was no market for this system as a product. We at JLab budgeted in-house funds to work on on continued improvements. Per Costpoint, we spent a total of $21,699 loaded on this project. Additional funds were available to hire a contract programmer to make needed program changes, however, the source language used is an older one, no longer taught or in use. I was unable to find any capable programmer. So, the work came to a halt. The CRADA expired. The system is not presently functional. We estimate that a meaningful redesign would require $250,000 in labor and materials. So, while the promised function of the system would be unique and very helpful for some of our technical trouble-shooting needs, it is presently dead in the water and very, very far down on our unfunded priorities list.

Reece, Charles↗

20 Years Experience with the World's Largest Superconducting RF Application: CEBAF

The Continuous Electron Beam Accelerator Facility (CEBAF) uses over 350 multi-cell resonant rf structures to accelerate a precision high-power electron beam for nuclear physics research. These cavities are made of bulk niobium and operated CW at 2.07K, employing the world's 2nd largest sub-lambda cryogenics system. The superconducting system is a vital part of this unique tool for fundamental research. Through 20 years of system construction and operation the preparation methods have evolved and the performance levels have continued to climb. State-of-the practice now supports > 50 MV/m surface electric fields and > 100 mT surface magnetic fields while maintaining < 30 nOhm surface resistance. The evolution of the superconducting aspects of CEBAF will be reviewed, together with the associated production methods.

Reece, Charles↗

Structural Characterization of Nb Films Deposited by ECR Plasma Energetic Deposition on Crystalline Insulators

An energetic condensation thin film coating technique with an electron cyclotron resonance (ECR) induced plasma ion source is used to deposit Nb thin films on crystalline insulating substrates, such as a-plane and c-plane sapphire (Al2O3) and on magnesium oxide, MgO (100), (110) and (111). Heteroepitaxial Nb films were produced by ECR deposition with regulated substrate temperature. The residual resistance ratio (RRR) of about 1 micron thick films reach unprecedented values (350 - 450) on (11-20) sapphire substrates. The epitaxial relationship of Nb/crystalline substrate is found to be strongly influenced by the substrate bias voltage (adding to the initial Nb+ kinetic energy), the substrate crystalline orientation, and heating conditions. At low substrate temperature, the Nb films demonstrated non-epitaxial crystalline textures, revealed by XRD Pole Figure technique and Electron Backscattering Diffraction (EBSD). The texture might be caused by ?Volmer-Weber? growth mode, i.e. island growth, at low surface adatom mobility. This study shows that the film?s crystal structural character has great impact on its RRR/Tc value, which in turn is related to the electron-mean-free-path of radio-frequency superconductivity. The knowledge learned from this research sheds some light on how to coat low-defect density Nb thin films on SRF cavity-preferred metallic substrates, such as Cu.

Zhao, X.↗

RF SURFACE IMPEDANCE OF MgB2 THIN FILMS AT 7.5 GHz

The Surface Impedance Characterization (SIC) system in Jefferson Lab can presently make direct calorimetric RF surface impedance measurements on the central 0.8 cm2 area of 5 cm diameter disk samples from 2 to 20 K exposed to RF magnetic fields up to 14 mT at 7.5 GHz. MgB2 thin films from STI/LANL were deposited on 5 cm diameter Nb disks using reactive evaporation technique. We will report the results of measurements on these samples using the SIC system. The data will be interpreted based on BCS theory as the temperature-dependant properties suggest evaluation of the Tc, energy gap, penetration depth, mean free path and coherence length.

Phillips, Harry↗

SRF MULTILAYER STRUCTURES BASED ON NBTIN

For the past three decades, bulk niobium has been the material of choice for SRF cavities applications. In the recent years, RF cavities performances have approached the theoretical limit for bulk niobium. For further improvement of RF cavity performance for future accelerator projects, an interesting alternative has been recently proposed by Alex Gurevich with the Superconductor-Insulator-Superconductor multilayer approach, using the benefit of the higher critical field Hc2 of higher-Tc superconductors without being limited with their lower Hc1. JLab is pursuing this approach with the development of multilayer structures based on NbTiN via magnetron sputtering and High Power Impulse Magnetron Sputtering (HiPIMS). Insulators such as, AlN, Al2O3 and MgO are being investigated as candidates for the insulator layers. This paper present the preliminary results on the characteristics of NbTiN and insulator layers and a first attempt of a NbTiN-based multilayer structure on bulk Nb and thick Nb films.

Valente, Anne-Marie↗

Anomalous Morphological Scaling in Epitaxial Nb Thin Films on MgO(001)

Surface and interface roughness are critical factors in determining the properties and technological viability of many systems. These considerations are of principle importance for the development of next-generation SRF cavities where the ultimate surface determines the cavity?s performance. The predominant SRF technology currently used in linear accelerators is based on bulk niobium cavities, but ongoing efforts to improve cavity?s performance have considered the possibility of multi-layered thin film coatings on SRF cavities. [1] Nucleation and growth kinetics influence epitaxial thin films grown onto different substrates. In addition, films differ from bulk systems mainly because of limited material supply as well as stress contributions due to lattice mismatch, which can induce significant surface roughness. Rough surfaces lead to undesirable effects for SRF applications, many of which can be minimized by suitable choice of thin film growth parameters. We have undertaken a systematic effort to understand the evolution of the surface under specific deposition conditions. We present our scaling analysis applied to the evolving surface during epitaxial Nb growth. Funding Agency ? Department of Energy: Development and Characterization of Thin Film SRF Surfaces for Accelerator Cavities: DE-PS02-09ER09-05 from DOE-OHEP ARRA.

Reece, Charles↗

Characterization of scale-dependent roughness of niobium surfaces as a function of surface treatment processes

Micro-roughness is attributed to be a critical issue for realizing optimum performance of Superconducting Radio Frequency (SRF) cavities. Several surface processing methods such as chemical, mechanical and plasma, are used to obtain relatively smooth surfaces. Among those process methods, Buffered Chemical Polish (BCP) and Electro-Polishing (EP) are most commonly used in current niobium cavity production. The topography of such surfaces are can be very well characterized by Atomic Force Microscopy (AFM). The Power Spectral Density (PSD) of surface height data provides a more thorough description to the topography than a simple Rq (RMS) measurement and reveals useful information about the surface including fractal and superstructure contributions. It has been noticed that polishing conditions such as processing duration and temperature can have predictable effects on the evolution of fractal features and superstructures at different scale regions in PSD spectrum in this present study. In this work, 1 dimensional average PSD functions derived from morphologies of niobium surfaces treated by BCP and EP with different controlled starting conditions and durations have been fitted with a combination of fractal, K-correlation and shifted Gaussian models, to extract characteristic parameters of the precision surfaces at different spatial harmonic scales. Analyzing such local roughness parameters, plausible explanations on such processes are given in detail.

Reece, Charles↗

Sulfur residues in niobium electropolishing

Electropolishing (EP) in sulfuric/hydrofluoric acid mixtures affords significantly greater surface smoothness than the incumbent buffered chemical polishing (BCP), making it attractive as the future baseline technology for SRF cavity manufacture. However, reported observations of particulate sulfur residues raise concern. One hypothesis is sulfate reduction to elemental sulfur at the cathode, where the measured potential drop is thermodynamically sufficient. Alternatively, the low effectiveness of the cathode?s aluminum oxide surface as a hydrogen recombination catalyst could lead to accumulation of atomic hydrogen, a powerful reductant. We explored these possibilities under standard EP conditions in a small three-electrode laboratory cell. We varied aluminum cathode area to obtain different current densities (and thus overpotentials) at constant cell current. We substituted platinum, an excellent hydrogen recombination catalyst, for aluminum in some experiments. Surface of cathodes were examined with Scanning Electron Microscope (SEM). Surface composition was analyzed by Energy Dispersive X-Ray Spectroscopy (EDS) and X-Ray Photoelectron Spectroscopy (XPS).

Reece, Charles↗

Structural Properties of Niobium Thin Films Deposited on Metallic Substrates by ECR

Particle accelerator technologies rely on SRF cavities to create the accelerating gradient for beam lines. Solid niobium cavities are widely employed throughout the community despite high material, fabrication, and operation cost. New thin film technologies are being explored for the suitability of niobium coatings for accelerating cavities. Thin layers of high-quality niobium would be deposited on a base material that has lower material and fabrication cost. Copper is a strong candidate for the cavity base due to availability, cost, machinability, and potentially improved performance characteristics of the niobium SRF surface. Initial results of TEM, EBSD and XRD analyses of niobium thin films grown on copper substrates under controlled conditions are presented to demonstrate the feasibility of the technology and establish lower limits of performance characteristics. Correlation of RRR data with the structure of niobium thin films will demonstrate the importance of thin film structural quality. *Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177.

Spradlin, Joshua↗

Detailed surface analysis of incremental Centrifugal Barrel Polishing (CBP) and EP of single-crystal niobium samples.

Detailed surface analysis of incremental Centrifugal Barrel Polishing (CBP) and EP of single-crystal niobium samples. Ari Palczewski, Hui Tian, Olga Trofimova, Charles Reece Jefferson Lab, Newport News, VA 23606 We performed Centrifugal Barrel Polishing (CBP) on single crystal niobium samples housed in a stainless steel sample holder following a polishing recipe recently developed at FNAL [1]. We were able to obtain a mirror-like finish after the final stage of tumbling, although some defects and imbedded particles remain. Our presentation will discuss the initial results from the coupon study, including qualitative and quantitative analysis of the surface characteristics from each step in the CBP process, followed by HPR and well controlled incremental EP. These will include surface roughness, size and character of contaminants, surface crystal structure, and overall finish. We will discuss how the surface characteristics should guide the SRF community in exploiting or adapting the Fermi recipe; including why minimal subsequent EP is needed, and possible places for modification of the recipe to reduce polishing time. This work is authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177. [1]CA Cooper, LD Cooley , ?Mirror Smooth Superconducting RF Cavities by Mechanical Polishing with Minimal Acid Use,? http://lss.fnal.gov/archive/2011/pub/fermilab-pub-11-032-td.pdf, (May 31, 2011)

Reece, Charles↗

SRF Challenges for Improving Operational Electron Linacs

The performance of the operational SRF-based electron linacs CEBAF, ELBE, and S-DALINAC continues to evolve positively. These facilities are exploiting opportunities to improve operational capability by both remediation of past limitations and also construction of new capacity using state-of-the-art designs and processes. A project to rework the weakest ten cryomodules in CEBAF was completed and enabled robust operation for physics at 6 GeV. The 12 GeV Upgrade of CEBAF is now underway and involves construction of ten new CW >100 MV cryomodules with 80 new 7-cell low-loss cell shaped fine-grained niobium cavities, all electropolished. The technical challenges associated with the preparation of these cavities will be reviewed and their performance in both individual acceptance testing and cryomodule testing to date will be summarized. The ELBE facility at Helmhotz Zentrum Dresden Rossendorf continues to develop its source with an SRF gun system. The long-running S-DALINAC at Technische Universität Darmstadt is operating reliably and is evolving in the direction of reduced energy spread and use of polarized electrons for nuclear physics and astrophysics research. *Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177.

Reece, Charles↗

CEBAF and Advances in RF Superconductivity

The CEBAF accelerator at Jefferson Lab has completed 18 years of operation, supporting 172 major experiments, 419 PhDs in NP to date, 204 more in progress, and 289 Physics Letters and Physical Review Letters publications and 889 publications in other refereed journals at the end of FY 2010. CEBAF has far exceeded its original performance requirements and via its current 12 GeV Upgrade Project is poised for breakthrough research in the coming decades. Its cw operation and precision beam characteristics are made possible by exploitation of superconducting rf (SRF) accelerating structures. While commitment to 5 MV/m accelerating gradient was considered risky in 1986, the continued evolution of CEBAF has been made possible by sustained advances in SRF technology in the years since. The progression of CEBAF capability from initial construction into its 12 GeV era will be reviewed alongside the enabling SRF technical advances.

Reece, Charles↗

Ultimate-Gradient SRF Test Cavity and Low Loss Tangent Measurements in Ultra Pure Sapphire

A test cavity has been designed to test wafer samples of superconducting materials at 1.3 GHz. Operating in TE01 mode, this mushroom shaped cavity creates a unique distribution of surface fields. The surface magnetic field on the sample wafer is 3.75 times greater than elsewhere on the Niobium (Nb) cavity surface. This made possible by loading the cavity with an ultra-pure sapphire just above the sample wafer. The maximum field seen by the Nb wall is only 25% of the value deposited on the sample surface. Therefore, it should be possible to push the sample wafer well beyond the BCS limit for Nb while still obtaining a respectable Q. The sapphire’s loss tangent and dielectric constant must be measured to finalize the design for the Wafer Test Cavity. A sapphire loaded CEBAF cavity has been constructed and tested; these results on the dielectric constant and loss tangent will be presented.

Pogue, Nathaniel↗

Summary Report for the C50 Cryomodule Project

The Thomas Jefferson National Accelerator Facility has recently completed the C50 cryomodule refurbishment project. The goal of this project was to enable robust 6 GeV, 5 pass operation of the Continuous Electron Beam Accelerator Facility (CEBAF). The scope of the project included removal, refurbishment and reinstallation of ten CEBAF cryomodules at a rate of three per year. The refurbishment process included reprocessing of SRF cavities to eliminate field emission and to increase the nominal gradient from the original 5 MV/m to 12.5 MV/m. New &#x27;dogleg&#x27; couplers were installed between the cavity and helium vessel flanges to intercept secondary electrons that produce arcing in the fundamental Power Coupler (FPC). Other changes included new ceramic RF windows for the air to vacuum interface of the FPC and improvements to the mechanical tuner. Damaged or worn components were replaced as well. All ten of the refurbished cryomodules are now installed in CEBAF and are currently operational. This paper will summarize the performance of the cryomodules.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

COMMISSIONING OF THE SRF SURFACE IMPEDANCE CHARACTERIZATION SYSTEM AT JEFFERSON LAB

Superconducting radio frequency (SRF) technology is widely adopted in particle accelerators. There remain many open questions, however, in developing a systematic understanding of the fundamental behavior of SRF materials, including niobium treated in different ways and various other bulk/thin film materials that are fabricated with different methods under assorted conditions. A facility that can measure the SRF properties of small samples in a range of 0~180 mT surface field and 2~20 K temperature is needed in order to fully answer these questions. The Jefferson Lab surface impedance characterization (SIC) system [1] has been designed to attempt to meet this requirement. It consists of a sapphire-loaded cylindrical Nb TE011 cavity at 7.5 GHz with a 50 mm diameter flat sample placed on a non-contacting end plate and uses a calorimetric technique [2-5] to measure the rf induced heat on the sample. Driving the resonance to a known field on this surface enables one to derive the surface resistance of the small localized area. TE011 mode identification has been done at room temperature and 4 K, and has been compared with Microwave Studio® simulation results. The variable input and transmitted rf couplers have been characterized. Rf loss mechanisms in the SIC system are under investigation. Thermal properties of the calorimeter have been well studied. A second generation calorimeter is being developed to optimize the dynamic range of the system. A prototype VCO phase lock loop system has been used in CW mode. Preliminary tests with bulk Nb samples have been done at <3 mT magnetic field. The presently available hardware is expected to enable up to 20 mT peak magnetic field on the sample, and paths to higher field tests have been identified.

Xiao, Binping↗

Evaluation of the diffusion coefficient of fluorine during the electropolishing of niobium

Future accelerators require unprecedented cavity performance, which is strongly influenced by interior surface nano-smoothness. Electropolishing (EP) is the technique of choice being developed for high–field SRF cavities. Previous study has shown that the mechanism of Nb electropolishing proceeds by formation and dissolution of a compact salt film under fluorine diffusion-limited mass transport control. We pursue an improved understanding of the microscopic conditions required for optimum surface finishing. The viscosity of the standard electrolyte has been measured using a commercial viscometer, and the diffusion coefficient of fluorine was derived at a variety of temperatures from 0ºC to 50ºC using an Nb rotating disk electrode. In addition, data indicate that electrode kinetics becomes competitive with the mass transfer current limitation and increases dramatically with temperature. These findings are expected to guide the optimization of EP process parameters for achieving controlled, reproducible and uniform nano-smooth surface finishing of SRF cavities.

43 PARTICLE ACCELERATORS↗

Exploration and comparison of hydrodynamic and thermal properties of horizontal and vertical electropolishing configurations with various boundary conditions

Extending initial efforts reported at the 2007 SRF Workshop, a system for modeling the thermal and hydrodynamic flow conditions internal to an electropolishing niobium cavity has been developed using the commercial code CFDesign®. Building upon parametric studies with small niobium samples that highlighted the process sensitivity to both local temperature and fluid flow conditions, we seek to gain predictive insight into processing methods which assure uniform controlled polishing ? in both the traditional rotating horizontal configuration as well as the potentially more convenient vertical orientation. For present modeling runs, the experimentally measured temperature-dependent viscosity of the standard HF/H2SO4 electrolyte has been included. For the horizontal configuration, we have modeled the recent JLab-adopted reduced temperature and flow conditions used for ILC cavity processing and find corroboration of improved thermal control and uniformity. For vertical EP, the amplitude and pattern of nominally steady-state internal convective flow under conditions of external wall cooling and no electrolyte circulation has been observed for vertical EP for both single-cell and 9-cell cavities. Opportunities for modeling an integrated next-generation system are being explored.

Reece, Charles↗