Engineering topics

Rhodes, T. L.

Publications and source records attributed to Rhodes, T. L..

At least 19 records

DOE OSTI2024

Integration of fixed-frequency and FM-CW (frequency-modulated continuous-wave) reflectometers for coincident turbulence measurements on LTX- β (Lithium Tokamak eXperiment- β )

The fixed-frequency and frequency-modulated continuous-wave (FM-CW) reflectometers on LTX-β (Lithium Tokamak eXperiment-β) have been configured to use the same transmission lines and antenna arrays for coincident views of the core and edge plasma. The fixed-frequency channels (13.1–20.5 and 20–40 GHz, tunable between discharges) provide time-resolved measurements of density fluctuations, while the FM-CW channels (13.1–20.2 and 19.5–33.5 GHz) measure the density profile and fluctuations, with high spatial resolution and a sampling rate determined by the frequency sweep interval (5 μs). Data from both reflectometers are synchronously acquired to simultaneously leverage the wide bandwidth and high spatial resolution of the respective systems. Experiments showed that mutual crosstalk interference is momentary and does not diminish the capability of either system. Spectral analysis indicated broad power spectra (several hundreds of kHz) and suggests that the signals from the FM-CW system are consistent with under-sampled fixed-frequency signals. Radial correlations were explored using data from the two reflectometers, as well as from the FM-CW system alone. The core channels showed high levels of agreement between these two comparisons, suggesting that the data from the reflectometers are interchangeable for statistical estimates. For the edge channels, comparisons using data from the FM-CW reflectometer alone showed significant decorrelation due to time lag caused by the finite frequency up-sweep duration. Alternatively, this effect is eliminated when cross-correlating data from the different reflectometers. Finally, these results highlight the advantages of operating the fixed-frequency and FM-CW reflectometers in this manner, where the combined system can overcome the limitations of each separate system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

New millimeter-wave diagnostics to locally probe internal density and magnetic field fluctuations in National Spherical Torus Experiment-Upgrade (invited)

A set of new millimeter-wave diagnostics will deliver unique measurement capabilities for National Spherical Torus Experiment-Upgrade to address a variety of plasma instabilities believed to be important in determining thermal and particle transport, such as micro-tearing, global Alfvén eigenmodes, kinetic ballooning, trapped electron, and electron temperature gradient modes. These diagnostics include a new integrated intermediate-k Doppler backscattering (DBS) and cross-polarization scattering (CPS) system (four channels, 82.5–87 GHz) to measure density and magnetic fluctuations, respectively. The system can access reasonably large normalized wavenumbers k θ ρ s ranging from ≤0.5 to 15 (where ion sound gyroradius ρ s = 1 cm and k θ is the binormal density turbulence wavenumber). The system addresses the challenges for making useful DBS/CPS measurements with a remote control of launch polarization (X- or O-mode), probed wavenumber, polarization match of the launch beam with the edge magnetic field pitch angle, and beam steering of the launched beam for wave-vector alignment. In addition, a low-k DBS system consisting of eight fixed frequencies (34–52 GHz) and four tunable frequencies (55–75 GHz) for low-k density turbulence and fast ion physics will be located at a nearby port location. Finally, the combined systems cover the near LCFS and pedestal regions (34–52 GHz), the pedestal or mid-radius (50–75 GHz), and core plasmas (82.5–87 GHz).

47 OTHER INSTRUMENTATION↗

DOE OSTI2024

A new synthetic correlation electron cyclotron emission diagnostic for validating nonlinear gyrokinetic simulations of electron temperature turbulence

To validate nonlinear gyrokinetic simulations of electron temperature turbulence, the experimental correlation electron cyclotron emission (CECE) measurements are to be compared using a synthetic CECE diagnostic, which generates modeled CECE measurement quantities by implementing realistic measurement parameters (e.g., spatial and wavenumber resolutions, radial location, etc.) to nonlinear gyrokinetic simulations. In this work, we calculate the radial and vertical spatial and wavenumber transfer functions, which are defined by the electron cyclotron emission emissivity radial profile and vertical probing antenna pattern, respectively. These transfer functions are applied to nonlinear gyrokinetic simulations of electron temperature turbulence using the continuum gyrokinetic code. A simultaneous comparison of the experimental electron temperature turbulence power spectrum and root-mean-square (RMS) level, as well as the radial correlation length with the new synthetic CECE diagnostic at a core location ρ ∼ 0.75 in an L-mode DIII-D tokamak plasma, is presented. Here, the preliminary result shows that the synthetic CECE output underestimates the RMS level by ∼42% and overestimates the radial correlation length by ∼40%.

Cyclotron radiation↗

DOE OSTI2024

Using convolutional neural networks to detect edge localized modes in DIII-D from Doppler backscattering measurements

In H-mode tokamak plasmas, the plasma is sometimes ejected beyond the edge transport barrier. These events are known as edge localized modes (ELMs). ELMs cause a loss of energy and damage the vessel walls. Understanding the physics of ELMs, and by extension, how to detect and mitigate them, is an important challenge. In this paper, we focus on two diagnostic methods—deuterium-alpha (D α ) spectroscopy and Doppler backscattering (DBS). The former detects ELMs by measuring Balmer alpha emission, while the latter uses microwave radiation to probe the plasma. DBS has the advantages of having a higher temporal resolution and robustness to damage. These advantages of DBS diagnostic may be beneficial for future operational tokamaks, and thus, data processing techniques for DBS should be developed in preparation. In sight of this, we explore the training of neural networks to detect ELMs from DBS data, using D α data as the ground truth. With shots found in the DIII-D database, the model is trained to classify each time step based on the occurrence of an ELM event. The results are promising. When tested on shots similar to those used for training, the model is capable of consistently achieving a high f1-score of 0.93. Furthermore, this score is a performance metric for imbalanced datasets that ranges between 0 and 1. We evaluate the performance of our neural network on a variety of ELMs in different high confinement regimes (grassy ELM, RMP mitigated, and wide-pedestal), finding broad applicability. Beyond ELMs, our work demonstrates the wider feasibility of applying neural networks to data from DBS diagnostic.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Broadening of the Divertor Heat Flux Profile in High Confinement Tokamak Fusion Plasmas with Edge Pedestals Limited by Turbulence in DIII-D

Multimachine empirical scaling predicts an extremely narrow heat exhaust layer in future high magnetic field tokamaks, producing high power densities that require mitigation. Here, in the experiments presented, the width of this exhaust layer is nearly doubled using actuators to increase turbulent transport in the plasma edge. This is achieved in low collisionality, high confinement edge pedestals with their gradients limited by turbulent transport instead of large-scale, coherent instabilities. The exhaust heat flux profile width and divertor leg diffusive spreading both double as a high frequency band of turbulent fluctuations propagating in the electron diamagnetic direction doubles in amplitude. The results are quantitatively reproduced in electromagnetic XGC particle-in-cell simulations which show the heat flux carried by electrons emerges to broaden the heat flux profile, directly supported by Langmuir probe measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Characterization of mesoscopic turbulent transport events with long-radial-range correlation in DIII-D H-mode plasmas

A dimensionless collisionality scan has been performed in H-mode plasmas on DIII-D tokamak, with detailed measurements of intermediate-to-high wavenumber turbulence using Doppler backscattering systems. Furthermore, it is found that the shorter wavelength turbulence develops into spatially asymmetric turbulent structures with a long-radial-range correlation (LRRC) in the mid-radius region of high collisionality discharges. Linear cgyro simulations indicate that the underlying turbulence is likely driven by the electron-temperature-gradient mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Design elements and first data from a new Doppler backscattering system on the MAST-U spherical tokamak

A new Doppler backscattering (DBS) system has been installed and tested on the MAST-U spherical tokamak. It utilizes eight simultaneous fixed frequency probe beams (32.5, 35, 37.5, 40, 42.5, 45, 47.5, and 50 GHz). These frequencies provide a range of radial positions from the edge plasma to the core depending on plasma conditions. The system utilizes a combination of novel features to provide remote control of the probed density wavenumber, the launched polarization (X vs O-mode), and the angle of the launched DBS to match the magnetic field pitch angle. The range of accessible density turbulence wavenumbers (kθ) is reasonably large with normalized wavenumbers kθρs ranging from ≤0.5 to 9 (ion sound gyroradius ρs = 1 cm). This wavenumber range is relevant to a variety of instabilities believed to be important in establishing plasma transport (e.g., ion temperature gradient, trapped electron, electron temperature gradient, micro-tearing, kinetic ballooning modes). The system is specifically designed to address the requirement of density fluctuation wavevector alignment which can significantly reduce the SNR if not accounted for.

Instruments & Instrumentation↗

DOE OSTI2022

Evaluation of a new DIII-D Doppler backscattering system for higher wavenumber measurement and signal enhancement

The high density fluctuation poloidal wavenumber, k θ (k θ > 8 cm –1 , k θ ρ s > 5, ρs is the ion gyro radius using the ion sound velocity), measurement capability of a new Doppler backscattering (DBS) system at the DIII-D tokamak has been experimentally evaluated. In DBS, wavenumber (k) matching becomes more important at higher wavenumbers, owing to the exponential dependence of the measured signal loss factor on wave vector mismatch. Wave vector matching allows for the Bragg scattering condition to be satisfied, which minimizes the signal loss at higher k’s. In the previous DBS system, without toroidal wave vector matching, the measured DBS signal-to-noise ratio at higher k θ (>8 cm –1 ) is substantially reduced, making it difficult to measure higher k θ turbulence. The new DBS system has been optimized to access higher wavenumber, k θ ≤ 20 cm –1 , density turbulence measurement. The optimization hardware addresses fluctuation wave vector matching using toroidal steering of the launch mirror to produce a backscattered signal with improved intensity. The probe’s sensitivity to high-k density fluctuations has been increased by approximately an order of magnitude compared to the old system that has been in use at DIII-D. Note that typical measurement locations are above or below the tokamak midplane on the low field side with normalized radial ranges of 0.5–1.0. As a result, the new DBS probe system with the toroidal matching of fluctuation wave vectors is thought to be critical to understanding high-k turbulent transport in fusion-relevant research at DIII-D.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Numerical modeling of pedestal stability and broadband turbulence of wide-pedestal QH-mode plasmas on DIII-D

The wide-pedestal quiescent high confinement mode discovered on DIII-D in recent years is a stationary and quiescent H-mode (QH-mode) with the pedestal width exceeding EPED prediction by at least 25%. Its characteristics, such as low rotation, high energy confinement and edge localized mode-free operation, make it an attractive operation mode for future reactors. Linear and nonlinear simulations using BOUT++ reduced two fluid MHD models and awere carried out to investigate the bursty broadband turbulence often observed in the edge of wide-pedestal QH-mode plasmas. Two kinds of MHD-scale instabilities in different spatial locations within the pedestal were found in the simulations: one mild peeling–ballooning (PB) mode γ PB < 0.04ω A ) located near the minimum in E r</:sub> well propagating in ion diamagnetic drift direction; and one drift-Alfvén wave locates at smaller radius compared to E r</:sub> well propagating in the electron diamagnetic drift direction and unstable only when the parallel electron dynamics is included in the simulation. The coupling between drift wave and shear Alfvén wave provides a possible cause of the experimentally observed local profile flattening in the upper-pedestal. The rotation direction, mode location, as well as the wavenumber of these two modes from BOUT++ simulations agree reasonably well with the experimental measurements, while the lack of quantitative agreement is likely due to the lack of trapped electron physics in current fluid model. This work presents improved physics understanding of the pedestal stability and turbulence dynamics for wide-pedestal QH-mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

New understanding of inter-ELM pedestal turbulence, transport, and gradient behavior in the DIII-D tokamak

New observations of pedestal localized turbulence in the inter-ELM period of H-mode plasmas in DIII-D show that ion temperature gradient mode scale (ITG-scale) density fluctuation (ñ) increases immediately after each ELM crash and is quickly suppressed during the increase in local E × B shear. This excitation and subsequent suppression of ITG-scale ñ can explain the previously reported anomalous ion heat flux, Qi during the ELM (Viezzer et al 2017 Nucl. Fusion 57 022020). Shorter wavelength trapped electron mode scale (TEM-scale) ñ starts to increase at a critical pedestal temperature gradient (∇Te,ped) and saturates as local E × B shear, ${T}_{\mathrm{i}}^{\mathrm{C}\mathrm{6}+}/{T}_{\mathrm{e}}$ ratio, and ∇Te,ped saturate. This TEM-scale ñ, which has the potential to cause electron (and also ion) heat transport, is consistent with driving an anomalous electron heat flux Qe, where Qe is estimated between ELMs using experimental profiles and power balance. Both ITG- and TEM-scale ñ amplitude variations with background Ti/Te and ∇ne,ped are found to be consistent with theoretical predictions of these measured density fluctuations being ITG and TEM instabilities respectively. Furthermore, these new and unique observations on the nature of turbulence and their potential contributions to electron and ion heat fluxes at different ELM periods (i.e. collapse, recovery, and saturation phases of pedestal gradients) can significantly test and improve our pedestal predictive capabilities for ITER and other future fusion devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Inter-ELM pedestal evolution and the role of edge fluctuations in the C-Mod and DIII-D tokamaks

Edge localized modes (ELMs) lead to a cyclical behaviour of the H-mode pedestal density, temperature and pressure. Substantial evidence exists associating the ELM crash with violation of ideal MHD stability, via current driven kink/peeling modes and/or pressure gradient driven ballooning modes. Recovery from ELM crashes and buildup to the next ELM crash is an active and critical area of edge physics research for ITER projections. In one set of theories, the pedestal pressure profile in H-mode discharges is predicted to be limited by micro-instabilities. One such micro-instability is the kinetic ballooning mode (KBM), which is hypothesized to provide a ‘soft’ limit that regulates the edge transport, thereby restricting the local pressure gradient. In this picture, e.g. in the EPED model, the pedestal width expands slowly until the ideal MHD stability limit is reached. Experiments were recently performed on the C-Mod and DIII-D devices to search for instabilities correlated with the pedestal evolution between ELMs. The results show correlations between the onset of quasi-coherent fluctuations between type I ELMs and a critical temperature gradient. Linear gyrokinetic calculations have shown that these fluctuations have characteristics similar to those expected for KBMs. These results provide additional data toward validation of the EPED model, increasing confidence in ITER projections.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

The role of ion and electron-scale turbulence in setting heat and particle transport in the DIII-D ITER baseline scenario

In this work, the heat and particle transport in a DIII-D ITER Baseline Scenario (IBS) discharge has been investigated using both linear and nonlinear gyrokinetic simulations performed with the CGYRO code [J. Candy et al: Journal Comp. Phys. (2016)].These simulations were used to investigate the role that ion-scale ($k_θp_s$ < 1:0) and electron-scale ($k_θp_s$ > 1:0) turbulence play in determining heat and particle transport in the core of conditions believed to directly extrapolate to ITER operation. This investigation spans over nearly half of the plasma minor radius, from ρ = 0:45 - 0:85. To probe the nature of the transport and turbulence in these conditions and to validate the model against experimental fluxes, scans of $a/L_{T_i}$, $a/L_{T_e}$, and $a/L_n$ were performed at all radial locations. Long wavelength turbulence is found to be dominated by ITG modes with strong non-adiabatic electron effects and appears unable to reproduce ion and electron heat fluxes and electron particle fluxes simultaneously at most radial positions when single parameter scans are performed. To investigate the potential role of short wavelength turbulence, a series of electron-scale simulations are performed that indicate that experimentally relevant levels of electron heat flux could arise at sub-ion scales. Quantitative comparison of the simulated fluxes obtained from ion and electron-scale simulations with experimental levels along with the sensitivity of simulations results to changes in inputs is presented. Through extensive sensitivity scans and comparison with multiple transport channels, this work demonstrates a clear need for self-consistent modification of multiple inputs and suggests multi-scale interactions play a significant role at many of the radial locations studied. The results of this analysis help shape our understanding of the model fidelity needed to predict turbulence and transport reactor-relevant conditions and have important implications for the prediction of future fusion devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Multiscale Chirping Modes Driven by Thermal Ions in a Plasma with Reactor-Relevant Ion Temperature

A thermal ion driven bursting instability with rapid frequency chirping, considered as an Alfv´enic ion temperature gradient mode, has been observed in plasmas having reactor-relevant temperature in the DIII-D tokamak. The modes are excited over a wide spatial range from macroscopic device size to micro-turbulence size and the perturbation energy propagates across multiple spatial scales. The radial mode structure is able to expand from local to global in ~ 0.1 ms and it causes magnetic topology changes in the plasma edge, which can lead to a minor disruption event. Since the mode is typically observed in the high ion temperature ≳ 10 keV and high-! plasma regime, the manifestation of the mode in future reactors should be studied with development of mitigation strategies, if needed. In conclusion, this is the first observation of destabilization of the Alfv´en continuum caused by the compressibility of ions with reactor-relevant ion temperature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Ray-tracing analysis for cross-polarization scattering diagnostic on MAST-upgrade spherical tokamak

A combined Doppler backscattering/cross-polarization scattering (DBS/CPS) system is being deployed on MAST-U for simultaneous measurements of local density turbulence, turbulence flows, and magnetic turbulence. In this design, CPS shares the probing beam with the DBS and uses a separate parallel-viewing receiver system. In this study, we utilize a modified GENRAY 3D ray-tracing code to simulate the propagation of the probing and scattered beams. The contributions of different scattering locations along the entire beam trajectories are considered, and the corresponding local B̃ wavenumbers are estimated using the wavevector matching criterion. The wavenumber ranges of the local B̃ that are detectable to the CPS system are explored for simulated L- and H-mode plasmas.

Hong, R. (ORCID:0000000347508015)↗

DOE OSTI2021

Achievement of Reactor-Relevant Performance in Negative Triangularity Shape in the DIII-D Tokamak

Plasma discharges with a negative triangularity (δ=−0.4) shape have been created in the DIII-D tokamak with a significant normalized beta (βN=2.7) and confinement characteristic of the high confinement mode (H98y2=1.2) despite the absence of an edge pressure pedestal and no edge localized modes (ELMs). These inner-wall-limited plasmas have a similar global performance as a positive triangularity (δ=+0.4) ELMing H-mode discharge with the same plasma current, elongation and cross sectional area. For cases both of dominant electron cyclotron heating with Te/Ti>1 and dominant neutral beam injection heating with Te/Ti=1, turbulent fluctuations over radii 0.5<ρ<0.9 were reduced by 10–50% in the negative triangularity shape compared to the matching positive triangularity shape, depending on the radius and conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

New methodology for measuring electron density perturbations caused by plasma coherent modes using profile reflectometry: Magnitudes and radial profiles in DIII-D

New capabilities of fast-sweep frequency-modulated profile reflectometry are explored to measure electron density ne perturbation magnitudes and radial profiles due to plasma coherent modes in DIII-D. The first approach is based on the frequency analysis of phase perturbations associated with high frequency (~MHz) Alfvén eigenmodes (AEs). The measurement of ~5.5 MHz fast-ion-driven global Alfvén eigenmodes (GAEs) is demonstrated in a neutral beam-heated DIII-D plasma. The GAE induced a broad radial distribution of phase perturbations in the profile reflectometer data. Analysis of these data determined the effective cutoff location displacement and the estimated ne fluctuation profile. In the second approach, high resolution ne profiles are used directly to determine the radial structure of ne perturbations due to a neo-classical tearing mode. These new measurements broaden the application of profile reflectometry and advance the development of AE spectroscopy as a tool for non-invasive diagnosis of fast-ion-driven modes in DIII-D and burning plasmas such as ITER.

47 OTHER INSTRUMENTATION↗

DOE OSTI2021

Resolving ECRH deposition broadening due to edge turbulence in DIII-D

Microwave heat pulse propagation experiments have demonstrated a correlation between millimeter-scale turbulence and deposition profile broadening of electron cyclotron (EC) waves on the DIII-D tokamak. In a set of discharges in DIII-D, a variation in edge density fluctuations on the mm-scale is associated with 40%–150% broader deposition profiles, expressed in terms of normalized minor radius, as compared with equilibrium ray tracing. The 1D power profile is determined from transport analysis of the electron temperature response to EC power modulation using perturbative analysis with a square wave power modulation at 20–70 Hz, producing a series of Fourier harmonics that are fit collectively to resolve transport. Fitting an integrated heat flux expressed in the Fourier basis of the modulation to diffusive, convective, and coupled transport terms in a linear model can resolve the broadened EC deposition width from the power perturbation to resolve a broadening in each case. The best fit degree of beam broadening observed scales approximately linearly with the Doppler backscattering measured fluctuation level in the steep gradient region. Quantifying the effect of edge fluctuation broadening on EC current drive power needs of future devices will require 3D full-wave codes that can be validated on the current generation of machines. These DIII-D experiments provide a quantitative measure of fluctuation effects and a dataset to benchmark full-wave simulations that can model and eventually predict nonlinear effects neglected by 1D equilibrium beam and ray tracing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

New, improved analysis of correlation ECE data to accurately determine turbulent electron temperature spectra and magnitudes (invited)

Turbulent electron temperature fluctuation measurement using a correlation electron cyclotron emission (CECE) radiometer has become an important diagnostic for studying energy transport in fusion plasmas, and its use is widespread in tokamaks (DIII-D, ASDEX Upgrade, Alcator C-Mod, Tore Supra, EAST, TCV, HL-2A, etc.). The CECE diagnostic typically performs correlation analysis between two closely spaced (within the turbulent correlation length) ECE channels that are dominated by uncorrelated thermal noise emission. This allows electron temperature fluctuations embedded in the thermal noise to be revealed and fluctuation level and spectra determined. We have demonstrated a new, improved CECE coherency-based analysis for calculating the temperature fluctuation frequency spectrum and level, which has been verified both numerically through the simulation of synthetic ECE radiometer data and through analysis of experimental data from the CECE system on DIII-D. The new formulation places coherency-based analysis on a firm foundational footing and corrects some currently published methodologies. This new method accurately accounts for bias error in the coherence function and correctly calculates noise levels for a fixed data record length. It provides excellent accuracy in determining temperature fluctuation level (e.g., <10% error) even for a small realization number in the ensemble average. The method also has a smaller uncertainty (i.e., error bar) in the power spectrum when compared to the more standard cross-power method when evaluated at low coherency. Direct calculation of system noise level using correlation between randomized intermediate frequency signals is recommended.

Wang, G. (ORCID:0000000225739827)↗