Search NASA⌕ Search

DOE OSTI · 2420898

Design elements and first data from a new Doppler backscattering system on the MAST-U spherical tokamak

Abstract

A new Doppler backscattering (DBS) system has been installed and tested on the MAST-U spherical tokamak. It utilizes eight simultaneous fixed frequency probe beams (32.5, 35, 37.5, 40, 42.5, 45, 47.5, and 50 GHz). These frequencies provide a range of radial positions from the edge plasma to the core depending on plasma conditions. The system utilizes a combination of novel features to provide remote control of the probed density wavenumber, the launched polarization (X vs O-mode), and the angle of the launched DBS to match the magnetic field pitch angle. The range of accessible density turbulence wavenumbers (kθ) is reasonably large with normalized wavenumbers kθρs ranging from ≤0.5 to 9 (ion sound gyroradius ρs = 1 cm). This wavenumber range is relevant to a variety of instabilities believed to be important in establishing plasma transport (e.g., ion temperature gradient, trapped electron, electron temperature gradient, micro-tearing, kinetic ballooning modes). The system is specifically designed to address the requirement of density fluctuation wavevector alignment which can significantly reduce the SNR if not accounted for.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Rhodes, T. L., Michael, C. A., Shi, P., Scannell, R. (ORCID:0000000240640817), Storment, S., Pratt, Q. (ORCID:0000000325157787), Lantsov, R., Fitzgerald, I., Hall-Chen, V. H. (ORCID:0000000160093649), Crocker, N. A. (ORCID:0000000323795814), Peebles, W. A.. 2022-11-01. Design elements and first data from a new Doppler backscattering system on the MAST-U spherical tokamak. https://doi.org/10.1063/5.0101848

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Noncontact excitation of multi-GHz lithium niobate electromechanical resonators

Abstract The demand for high-performance electromechanical resonators is ever-growing across diverse applications, ranging from sensing and time-keeping to advanced communication devices. Among the electromechanical materials being explored, thin-film lithium niobate stands out due to its strong piezoelectric properties and low acoustic loss. However, in nearly all existing lithium niobate electromechanical devices, the configuration is such that the electrodes are in direct contact with the mechanical resonator. This configuration introduces an undesirable mass-loading effect, producing spurious modes and additional damping. Here, we present an electromechanical platform that mitigates this challenge by leveraging a flip-chip bonding technique to separate the electrodes from the mechanical resonator. By offloading the electrodes from the resonator, our approach yields a substantial increase in the quality factor of these resonators, paving the way for enhanced performance and reliability for their device applications.

Instruments & Instrumentation↗