Robinson, J. P. | Search NASA

NASA NTRS1985

Segmented testing

The fraction of faults detected for a digital network is frequently high for the first few input combinations applied out of a set of test vectors. When the particular ordering of test patterns does not appreciably change the shape of the coverage curve, there appears to be an advantage to splitting the test into segments which are applied at different times. It is shown that the expected time to error detection and the probability of an undetected double error can be reduced. The amount of reduction is dependent on the shape of the fault coverage curve. It is conjectured that such a reduction can be obtained for VLSI networks.

Robinson, J. P.↗

NASA NTRS1984

Segmented testing

The fraction of faults detected for a digital network is frequently high for the first few input combinations applied out of a set of test vectors. When the particular ordering of test patterns does not appreciably change the shape of the coverage curve, there appears to be an advantage to splitting the test into segments which are applied at different times. It is shown that the expected time to error detection and the probability of an undetected double error can be reduced. The amount of reduction is dependent on the shape of the fault coverage curve. It is conjectured that such a reduction can be obtained for VLSI networks.

Robinson, J. P.↗

NASA NTRS1983

Error latency estimation using functional fault modeling

A complete modeling of faults at gate level for a fault tolerant computer is both infeasible and uneconomical. Functional fault modeling is an approach where units are characterized at an intermediate level and then combined to determine fault behavior. The applicability of functional fault modeling to the FTMP is studied. Using this model a forecast of error latency is made for some functional blocks. This approach is useful in representing larger sections of the hardware and aids in uncovering system level deficiencies.

Manthani, S. R.↗

NASA NTRS1983

Testing the bus guardian unit of the FTMP

Fault-tolerant multiprocessor (FTMP) operation is discussed. Fault-modeling in the bus guardian units (BGUs) is covered. Testing the BGU is discussed. A testing algorithm is proposed.

Jha, M. K.↗