Search NASA⌕ Search

Engineering topics

Sassi, Michel

Publications and source records attributed to Sassi, Michel.

At least 37 records · Page 2

Ab initio thermodynamics reveals the nanocomposite structure of ferrihydrite

Ferrihydrite is a poorly crystalline iron oxyhydroxide nanomineral that serves a critical role as the most bioavailable form of ferric iron for living systems. However, its atomic structure and composition remain unclear due in part to ambiguities in interpretation of X-ray scattering results. Prevailing models so far have not considered the prospect that at the level of individual nanoparticles multiple X-ray indistinguishable phases could coexist. Using ab initio thermodynamics we show that ferrihydrite is likely a nanocomposite of distinct structure types whose distribution depends on particle size, temperature, and hydration. Nanoparticles of two contrasting single-phase ferrihydrite models of Michel and Manceau are here shown to be thermodynamically equivalent across a wide range of temperature and pressure conditions despite differences in their structural water content. Higher temperature and water pressure favor the formation of the former, while lower temperature and water pressure favor the latter. For aqueous suspensions at ambient conditions, their coexistence is maximal for particle sizes up to 12 nm. The predictions inform and help resolve different observations in various experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tritium Diffusion in Fe-Al Aluminide Coating Bulk Phases

The theoretical investigations of interstitial tritium diffusion pathways in various Al-rich (>60% at. Al) iron aluminide coating phases found that in FeNiAl 5 tritium prefers to diffuse in between layers, while in Fe 4 Al 13 , tritium prefers to diffuse across layers. In the case of Fe 2 Al x phases, the simulations show that the variable Al content in the channels affects the diffusion behavior of tritium in the channels. For 100% of vacancy, tritium prefers to diffuse at the center of the channel, while for 0% Al vacancy, tritium prefers to diffuse along the channel’s wall. In the case where 50% Al vacancy are present in the channels, tritium can diffuse in a mixed way, with positions oscillating between the channel’s center and wall. However, the large energy barrier involved in this case suggests that tritium diffusion could be correlated with Al diffusion in the channels. While we found that at 600 K interstitial tritium diffuses faster in Fe 2 Al x phases (D Τ ≤10 -11 m 2 .s -1 ), then in Fe 4 Al 13 (D Τ ≈10 -12 m 2 .s -1 ), and finally in FeNiAl 5 (D Τ ≈10 -13 m 2 .s -1 ), we also find that interstitial tritium generally diffuses faster in Fe-Al coating phases than in γ-LiAlO 2 pellets (D Τ ≈10 -14 m 2 .s -1 ).

36 MATERIALS SCIENCE↗

Developing a Fundamental Knowledge Base for the Interaction of Ruthenium with Natural and Engineered Iron-Bearing Materials

The intent of this project is to build a fundamental knowledge base concerning the redox coupling between Ru and Fe in heterogeneous systems with predictive applications towards the fate, speciation, and transport of Ru in the environment and its capture using available technologies. RuNOCl 3 and Fe 3+ are redox active over a broad range of pH. Initial assessment of effect of redox coupling between Ru and Fe indicates that Fe(III) in ferrihydrite can oxidize Ru 2+ in RuNOCl3 to Ru(IV) during coprecipitation at ambient conditions and alkaline pH. Further, evidence suggests that Ru(IV) is incorporated in the structure of fh. Likewise, Fe 3+ (aq) also reduces Ru 2+ in RuNOCl 3 in the homogenous system at acidic pH although the kinetics of reaction appear to be slow. Rufh annealed to 500 0C transforms to Ru(III) doped hematite. AIMD informed EXAFS indicates that Ru substitutes for Fe(III) in regular octahedral sites of hematite but requires three distinct configurations involving edge-sharing protonated Fe vacancies and straight substitution with no local defects. Fe 2+ (aq) appears to oxidize at the surface of RuO 2 , but the amount is too low to reasonably expect detectable reduced Ru. Future experiments at higher pH are warranted to make Fe 2+ (aq) less stable (i.e., make more redox active). We also demonstrated that we can functionalize Si aerogels with Fe(II) and Fe(III) but likely need to go to higher T to make Feo nanoparticles.

36 MATERIALS SCIENCE↗

Radiation-Induced Interfacial Hydroxyl Transformation on Boehmite and Gibbsite Basal Surfaces

Understanding the radiolytic reactivity of aluminum oxyhydroxide phases widely present in stored nuclear wastes is essential to develop reliable processing approaches. Recent experiments using vibrational sum frequency generation (VSFG), a surface sensitive technique, have shown that rehydration of γ-irradiated boehmite (010) and gibbsite (001) surfaces does not recover the initial hydroxyl density prior to irradiation. In this study, using density functional theory and nudged elastic band calculations, we examine dehydration and rehydration of these surfaces and attendant proton transfer mechanisms. While dehydration of both surfaces is predicted to be energetically unfavorable, rehydration of boehmite (010) is favorable after overcoming an energy barrier of 0.52 eV that relates to the orientation of surface hydroxyls controlling the hydrogen bonding network of adsorbed water. In the case of gibbsite (001), for which the experimental results suggest that rehydration mainly involves the reformation of interlayer hydroxyls, we found that a two-proton transfer mechanism is more likely than a one-proton transfer mechanism, and that it prevents the reorientation of interlayer hydroxyls into intralayer hydroxyls consistent with experimental VSFG findings. A detailed analysis of the effect of surface hydrogen vacancy on the strength of hydrogen bond interactions was performed, which indicates that H 2 and H 2 O are the energetically most favorable product species to form from radiation-induced surface H and/or OH defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Consequences of 131 I Transmutation in Gas Phase Radioiodine Molecules and Adsorbed on Graphite Surface

In the case of nuclear power plant accidents, several radionuclides are being dispersed into the environment. In particular, the release of radioiodine 131 I represents a major health concern because of its absorption by the thyroid gland. To reduce the release of 131 I into the environment, capture materials, such as activated carbon, provide a mean to efficiently retain radioiodine-bound molecular species. Here, we use ab initio molecular dynamic calculations to investigate the effects of 131 I radioactive decay on the molecular stability of I 2 , acid iodine (HI, HIO, HIO 2 , and HIO 3 ), and methyl-iodine species in both gas phase and adsorbed on graphite. In gas phase, we found that I 2 is the least resistant to 131 I transmutation, followed by the HIO x family of molecules, then HI and CH 3 I which are the most resistant. However, the graphite surface is found to greatly favorize the fragmentation of adsorbed molecular species. While the identification of gas phase fragments can offer new chemical route to consider in chemical kinetics models, the formation reactive fragment products at the graphite surface can favorize their reaction with surface carbon atoms which overtime could reduce the number of adsorption sites of capture materials available, and hence, impacting their capture capability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The role of surface hydroxyls on the radiolysis of gibbsite and boehmite nanoplatelets

Understanding mechanistic pathways to radiolytic hydrogen generation by metal oxyhydroxide nanomaterials is challenging because of the difficulties of distinguishing key locations of OH bond scission, from structural interiors to hydroxylated surfaces to physi-sorbed water molecules. In this work we exploited the interface-selectivity of vibrational sum frequency generation (VSFG) to isolate surface versus bulk hydroxyl groups for gibbsite and boehmite nanoplatelets before and after 60 Co irradiation at dose levels of approximately 7.0 and 29.6 Mrad. While high-resolution microscopy revealed no effect on particle bulk and surface structures, VSFG results clearly indicated up to 83% and 94% radiation-induced surface OH bond scission for gibbsite and boehmite, respectively, a substantially higher proportion than observed for interior OH groups by IR and Raman spectroscopy. Electron paramagnetic spectroscopy revealed that the major radiolysis products bound in the mineral structures are trapped electrons, O , O 2 – and possibly F-centers in gibbsite, and H , O and O 3 – in boehmite, which persist on the time frame of several months. The entrapped radiolysis products appear to be highly stable, enduring re-hydration of particle surfaces, and likely reflect a permanent adjustment in the thermodynamic stabilities of these nanomaterials.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Phase Transition and Liquid-like Superionic Conduction in Ag 2 S

Superionic conductivity in certain polymorphs of Ag 2 S has inspired numerous concepts for materials applications, but the relationship between the structure and the mobility of silver ions remains poorly explored. In this paper, we report ab initio molecular dynamics simulations for low- (acanthite) and high-temperature (argentite) Ag 2 S polymorphs that reveal the dynamical processes, giving rise to the superionic behavior in the latter. Similarities between their sulfur sublattices enable simulations of silver ion diffusivities and pathways on essentially an equal footing. For the higher temperature polymorph, calculated temperature-dependent mean square displacements and activation energies by the nudged elastic band method show good correspondence with expectations from the experiment. In the superionic state, silver atoms diffuse in a liquid-like behavior with no preferred diffusion pathways, within the relatively stable body-centered cubic sulfur framework. Conversely, conduction in acanthite appears to depend more on the mobilities of electronic charge carriers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evolution of Radicals from the Photolysis of High Ionic Strength Alkaline Nitrite Solutions

Reactive nitrogen species (RNS), along with reactive oxygen species (ROS), are significant products from radiolysis in solution. While much research has been focused on biological systems, these species are also important products in the autoradiolysis that occurs in nuclear waste. In this work, we determine the correlation between solution constituents, particularly nitrite, and radical products in highly alkaline solutions relevant to liquid waste. Because these radicals tend to be very short-lived, we employ spin trapping in conjunction with electron paramagnetic resonance (EPR) to detect them and quantify their production. Most spin traps do not function in these conditions (>1 M NaOH); however, nitroalkanes such as nitromethane will act as spin traps in their aci form, which is dominant at high pH. To restrict the products to those originating from nitrite, we use 280–480 nm UV light to generate radicals, avoiding products from the photolysis of water. Under these circumstances, nitric oxide, nitrite radicals, and hydroxyl radicals are detected, and the trends with the concentration of the constituents of the solutions are tracked. These include nitrite, nitrate, hydroxide, and carbonate. We find that, while the equilibrium shifts with increasing pH from hydroxyl radicals to the more slowly reacting oxide radicals, the production of nitrite radicals does not decrease.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Asymmetric Lattice Disorder Induced at Oxide Interfaces

Control of order-disorder phase transitions is a fundamental materials science challenge, underpinning the development of energy storage technologies such as solid oxide fuel cells and batteries, ultra-high temperature ceramics, and durable nuclear waste forms. At present, the development of promising complex oxides for these applications is hindered by a poor understanding of how interfaces affect lattice disordering processes and defect transport. Here we explore the evolution of local disorder in ion-irradiated La 2 Ti 2 O 7 /SrTiO 3 thin film heterostructures using a combination of high-resolution scanning transmission electron microscopy (STEM), position-averaged convergent beam electron diffraction (PACBED), electron energy loss spectroscopy (STEM-EELS), and ab initio theory calculations. We observe highly non-uniform lattice disordering driven by asymmetric oxygen vacancy formation across the interface. Our calculations indicate that this asymmetry results from differences in the polyhedral connectivity and vacancy formation energies of the two interface components, suggesting ways to manipulate lattice disorder in functional oxide heterostructures.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A Closer Look at Fe(II) Passivation of Goethite

Our understanding of how Fe(II) reacts with Fe(III) oxides has evolved significantly based on evidence for electron transfer at the oxide-water interface and Fe(II)-catalyzed recrystallization. Recent experiments, as well as computational calculations, further suggest that defects at oxide surfaces can facilitate electron transfer. There is, however, some evidence that these processes cease after continued contact with Fe(II). Here, we explore the sustainability of these processes over longer time frames by measuring whether exposure to Fe(II) inhibits Fe(II)-goethite electron transfer, and whether this inhibition is reversible. To quantify the extent of electron transfer, we used selective isotope labeling with 57Fe Mössbauer spectroscopy. The results revealed that pre-reacting goethite with Fe(II) decreases the extent of electron transfer during subsequent exposures, and that less electron transfer occurs with increasing reaction time. Similarly, X-ray absorption spectroscopy and magnetic circular dichroism suggest that reaction with Fe(II) consumes surface defects and forms a passivation layer, making goethite less susceptible to electron transfer. When Fe(II) is removed by either wet chemical extraction or oxidation, electron transfer is mostly restored, suggesting that inhibition of electron transfer is reversible. Our results show that in environmental systems, which are commonly subjected to transient geochemical fluctuations, electron transfer between Fe(II) and Fe oxides, and processes linked to it, are likely to be relevant beyond just short time scales.

Andrade de Notini, Luiza↗