Search NASA⌕ Search

Engineering topics

Schaechter, D. B.

Publications and source records attributed to Schaechter, D. B..

17 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Diffraction hardware testbed and model validation

Optical systems, which operate over a wide range of Fresnel numbers, are often times performance-limited by diffraction effects. In order to characterize such effects at the 40-100 picometer level, a diffraction testbed has been built which has the capability of measuring diffraction effects at this level. Concurrently, mathematical diffraction modeling tools have been developed that propagate an input wavefront through an optical train, while retaining amplitude and phase information at a grid resolution sufficient for yielding picometer-resolution diffraction test data. This paper contains a description of this diffraction hardware testbed, the diffraction modeling approach, and a comparison of the modeled and hardware test results, which then serves as validation of the diffraction modeling methodology.

optical↗
NASA NTRS1985

A hardware demonstration of distributed control for a flexible offset-feed antenna

A fully instrumented hardware model of a flexible offset-feed antenna has been constructed for laboratory tests. Three rate gyros, four angular position laser sensors, and a set of ten distributed accelerometers are used to rconstruct the antenna state. Three control moment gyros are used to simultaneously orient the antenna, and to maintain a stable line of sight. A description is presented of the distributed antenna control system and experimental results.

Schaechter, D. B.↗
NASA NTRS1985

Adaptive Filtering for Large Space Structures: A Closed-Form Solution

In a previous paper Schaechter proposes using an extended Kalman filter to estimate adaptively the (slowly varying) frequencies and damping ratios of a large space structure. The time varying gains for estimating the frequencies and damping ratios can be determined in closed form so it is not necessary to integrate the matrix Riccati equations. After certain approximations, the time varying adaptive gain can be written as the product of a constant matrix times a matrix derived from the components of the estimated state vector. This is an important savings of computer resources and allows the adaptive filter to be implemented with approximately the same effort as the nonadaptive filter. The success of this new approach for adaptive filtering was demonstrated using synthetic data from a two mode system.

Rauch, H. E.↗
NASA NTRS1985

Calculating Closed-Loop Sensitivity to Parameter Variations

Performance sensitivity calculated by back substitution. Original Lyapunov equation differentiated two times with respect to parameter p. Each differential turns out to yield Lyapunov equation for first and second derivatives with respective to parameter p of steady-state covariance of state variables. Derivatives desired closed-loop performance sensitivities.

Schaechter, D. B.↗
NASA NTRS1984

Experimental demonstration of the control of flexible structures

The Large Space Structure Technology Flexible Beam Experiment employs a pinned-free flexible beam to demonstrate such required methods as dynamic and adaptive control, as well as various control law design approaches and hardware requirements. An attempt is made to define the mechanization difficulties that may inhere in flexible structures. Attention is presently given to analytical work performed in support of the test facility's development, the final design's specifications, the control laws' synthesis, and experimental results obtained.

Schaechter, D. B.↗
NASA NTRS1983

Distributed system modeling of a large space antenna

A general approach for distributed parameter modeling of complex dynamical systems is described. The method consists of dividing the system in parts which can be modeled by simple partial differential equations and coupling the equations thus obtained by applying Hamilton's variational formalism to the entire system. The modeling of a large, offset-fed, wrap-rib antenna is presented to illustrate the approach. Although such models are perhaps not as precise as finite element models, they can be useful for initial physical insight and parametric design.

Hamidi, M.↗
NASA NTRS1983

Hardware verification of distributed/adaptive control

Adaptive control techniques are studied for their future application to the control of large space structures, where uncertain or changing parameters may destabilize standard control system designs. The approach used is to examine an extended Kalman filter estimator, in which the state vector is augmented with the unknown parameters. The associated Riccatti equation is linearized about the case of exact knowledge of the parameters. By assuming that parameter variations occur slowly, the filter complexity is reduced further yet. Simulations on a two degree-of-freedom oscillator demonstrate the parameter-tracking capability of the filter, and an implementation on the JPL Flexible Beam Facility using an incorrect model shows the adaptive filter/optimal control to be stable where a standard Kalman filter/optimal control design is unstable.

Eldred, D. B.↗
NASA NTRS1982

Closed loop control performance sensitivity to parameter variations

A very efficient technique for computing the closed loop performance sensitivities to parameter variations of a dynamic system with a reduced order controller has been developed. The eigensystem of the closed loop system is computed once. With this information, the closed loop filter and state rms responses, and the first and second derivatives of these rms values with respect to given parameters are computed. Detailed numerical examples using the JPL flexible beam and a 55 meter offset fed, wrap-rib antenna are included.

Schaechter, D. B.↗
NASA NTRS1982

Spacecraft drag-free technology development: On-board estimation and control synthesis

Estimation and control methods for a Drag-Free spacecraft are discussed. The functional and analytical synthesis of on-board estimators and controllers for an integrated attitude and translation control system is represented. The framework for detail definition and design of the baseline drag-free system is created. The techniques for solution of self-gravity and electrostatic charging problems are applicable generally, as is the control system development.

Key, R. W.↗
NASA NTRS1982

Control technology development

The main objectives of the control technology development task are given in the slide below. The first is to develop control design techniques based on flexible structural models, rather than simple rigid-body models. Since large space structures are distributed parameter systems, a new degree of freedom, that of sensor/actuator placement, may be exercised for improving control system performance. Another characteristic of large space structures is numerous oscillatory modes within the control bandwidth. Reduced-order controller design models must be developed which produce stable closed-loop systems when combined with the full-order system. Since the date of an actual large-space-structure flight is rapidly approaching, it is vitally important that theoretical developments are tested in actual hardware. Experimental verification is a vital counterpart of all current theoretical developments.

Schaechter, D. B.↗
NASA NTRS1982

Estimation of distributed parameter systems

The estimation and control of large flexible space structures pose significant new control technology problems. One major problem area is the closed-loop stability of a structure that has been modeled with truncated modal dynamics. Stability problems arise due to the control design process beginning with a deficient model. This work provides the necessary conditions for the optimal estimation of infinite dimensional (partial-differential equation) systems. This approach can be particularly useful for initial control studies and for gaining considerable insight into what the optimal estimator for a truly infinite dimensional system should be. A detailed example of the estimation of the continuous shape of a string in tension is presented.

Schaechter, D. B.↗
NASA NTRS1981

Distributed control of large space structures

Theoretical developments and the results of laboratory experiments are treated as they apply to active attitude and vibration control, as well as static shape control. Modern control theory was employed throughout as the method for obtaining estimation and control laws.

Schaechter, D. B.↗
NASA NTRS1980

Drag-free estimation feasibility study

A drag compensation system for solar probes and other spacecraft that require a drag-free capability is presented. Estimation techniques, derived from modern control theory, are proposed.

Schaechter, D. B.↗
NASA NTRS1980

Local distributed estimation

Based on partial differential equations of motion the closed form solution for the optimal estimation of a spatially continuous state vector is derived, using a continuously distributed sensor. Local control is shown to be the feedback that minimizes a quadratic performance index of sensor and process disturbances. A detailed example of the control of a string in tension is presented.

Schaechter, D. B.↗
NASA NTRS1980

Hardware demonstration of flexible beam control

An experiment employing a pinned-free flexible beam has been constructed to demonstrate and verify several facets of the control of flexible structures. The desired features of the experiment are to demonstrate active shape control, active dynamic control, adaptive control, various control law design approaches, and associated hardware requirements and mechanization difficulties. This paper contains the analytical work performed in support of the facility development, the final design specifications, control law synthesis, and some preliminary results.

Schaechter, D. B.↗
NASA NTRS1979

Optimal local control of flexible structures

The steady state solution of the linear quadratic optimal control problem with the constraint that only partial state information is available for feedback is derived. This development results in a systematic and computationally efficient approach for reducing the complexity of the control law for high order systems. Numerical examples and performance evaluation of (1) a simple fourth order system, and (2) a free-free flexible beam, are included.

Schaechter, D. B.↗