Search NASA⌕ Search

Engineering topics

Simoes-Ponce, T.

Publications and source records attributed to Simoes-Ponce, T..

Surplus Plutonium Disposition Sphincter Seal Development & Testing

The Surplus Plutonium Disposition Project (SPD, Project Y744) requested the Savannah River National Laboratory (SRNL) to perform a series of leak and durability tests on sphincter seals that were designed to process blend cans and shield cans into an SPD glovebox. Each sphincter seal assembly consisted of a stainless-steel outer sleeve weldment that was bolted onto the test enclosure and an aluminum inner sleeve that housed seven to nine Neoprene seals. All tests were executed to determine long term effects from processing approximately a year’s worth of blend and shield cans through the sphincter seals.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Characterizing The Mechanical Properties of Polyurethane Foams

The implementation of polyurethane foams as a permanent fixative for radioactive contamination is currently being examined within the DOE complex for its use in decontamination and decommissioning (D&D) activities. The work involving the implementation of permanent foaming fixatives in a decontamination scenario would include the filling of structures with large voids, such as gloveboxes, pipes, and tanks, where the use of a traditional 2D paint fixative is impractical or unsafe. The mechanical performance of such commercial off the shelf permanent foaming fixatives is uncharacterized with response to harsh environmental conditions often found in nuclear facilities that are undergoing D&D. To this end, SRNL embarked on a mechanical characterization of 6 polyurethane foams, 4 of which were considered flexible and 2 of which were rigid. Two tests were performed on these foams; a tensile tearing test and a compressive test, both of which were strictly guided by ASTM standards. It was found that in both harsh compressive and tensile scenarios, the Hilti brand foam outperformed all other foams, having a peak stress value higher than the closest competitor by a factor of 2.3, and a compressive yield point that was larger than the closest competitor by a factor of 1.4.

36 MATERIALS SCIENCE↗