Search NASA⌕ Search

Engineering topics

Singh, D

Publications and source records attributed to Singh, D.

29 records · Page 2

Heat transfer to a silicon carbide/water nanofluid.

Heat transfer experiments were performed with a water-based nanofluid containing 170-nm silicon carbide particles at a 3.7% volume concentration and having potential commercial viability. Heat transfer coefficients for the nanofluid are presented for Reynolds numbers ranging from 3300 to 13,000 and are compared to the base fluid water on the bases of constant Reynolds number, constant velocity, and constant pumping power. Results were also compared to predictions from standard liquid correlations and a recently altered nanofluid correlation. The slip mechanisms of Brownian diffusion and thermophoresis postulated in the altered correlation were investigated in a series of heating and cooling experiments.

42 ENGINEERING↗

Reaction mechanisms in the system {sup 20}Ne+{sup 165}Ho: Measurement and analysis of forward recoil range distributions

Keeping in view the study of complete and incomplete fusion of heavy ions with a target, the forward recoil range distributions of several evaporation residues produced at 164 MeV {sup 20}Ne-ion beam energy have been measured for the system {sup 20}Ne+{sup 165}Ho. The recoil catcher activation technique followed by off-line gamma spectroscopy has been employed. Measured forward recoil range distributions of these evaporation residues show evidence of several incomplete fusion channels in addition to complete fusion. The entire and partial linear momentum transfers inferred from these recoil range distributions were used to identify the evaporation residues formed by complete and incomplete fusion mechanisms. The results indicate the occurrence of incomplete fusion involving the breakup of {sup 20}Ne into {sup 4}He+{sup 16}O and/or {sup 8}Be+{sup 12}C followed by fusion of one of the fragments with target nucleus {sup 165}Ho. Complete and incomplete fusion reaction channels have been identified in the production of various evaporation residues and an attempt has been made to separate out relative contributions of complete and incomplete fusion components from the analysis of the measured recoil range distribution data. The total contribution of complete and incomplete fusion channels has also been estimated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

An investigation of silicon carbide-water nanofluid for heat transfer applications.

Thermal conductivity and mechanical effects of silicon carbide nanoparticles uniformly dispersed in water were investigated. Mean size of SiC particles was 170 nm with a polydispersity of {approx}30% as determined from small-angle x-ray scattering and dynamic light scattering techniques. Room temperature viscosity of the nanofluids ranged from 2 to 3 cP for nominal nanoparticle loadings 4-7 vol %. On a normalized basis with water, viscosity of the nanofluids did not significantly change with the test temperature up to 85 C. Optical microscopy of diluted nanofluid showed no agglomeration of the nanoparticles. Thermal conductivity of the fluid was measured as a function of the nominal nanoparticle loading ranging from 1 to 7 vol %. Enhancement in thermal conductivity was approximately 28% over that of water at 7 vol % particle loadings under ambient conditions. Enhancements in thermal conductivities for the nanofluids with varying nanoparticle loadings were maintained at test temperatures up to 70 C. Results of thermal conductivity have been rationalized based on the existing theories of heat transfer in fluids. Implications of using this nanofluid for engineering cooling applications are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermoelectric power factors of nanocarbon ensembles as a function of temperature.

Thermoelectric power factors of nanocarbon ensembles have been determined as a function of temperature from 400 to 1200 K. The ensembles, composed of mixtures of nanographite or disperse ultrananocrystalline diamond with B{sub 4}C, are formed into mechanically rigid compacts by reaction at 1200 K with methane gas and subsequently annealed in an argon atmosphere at temperatures up to 2500 K. The ensembles were characterized using scanning electron microscopy, Raman, x-ray diffraction, and high resolution transmission electron microscopy techniques and found to undergo profound nanostructural changes as a function of temperature while largely preserving their nanometer sizes. The power factors increase strongly both as a function of annealing temperature and of the temperature at which the measurements are carried out reaching 1 {mu}W/K{sup 2} cm at 1200 K without showing evidence of a plateau. Density functional 'molecular analog' calculations on systems based on stacked graphene sheets show that boron substitutional doping results in a lowering of the Fermi level and the creation of a large number of hole states within thermal energies of the Fermi level [P. C. Redfern, D. M. Greun, and L. A. Curtiss, Chem. Phys. Lett. 471, 264 (2009)]. We propose that enhancement of electronic configurational entropy due to the large number of boron configurations in the graphite lattice contributes to the observed thermoelectric properties of the ensembles.

03 NATURAL GAS↗

Microstructure and properties of ceramics and composites joined by plastic deformation.

A review is presented of the design of suitable materials systems for joining by high-temperature plastic deformation, details of the joining techniques, microstructures and properties of the resulting composite bodies, and prospects and limitation for this type of joining technology. Joining parameters and resulting forms are discussed for Al{sub 2}O{sub 3}/mullite particulate composites, Y{sub 2}O{sub 3}-stabilized ZrO{sub 2} particulate/Al{sub 2}O{sub 3} particulate and whisker-reinforced composites, hydroxyapatite bioceramics, La{sub 0.85}Sr{sub 0.15}MnO{sub 3} electronic ceramics, MgF{sub 2} optical ceramics, and Ni{sub 3}Al intermetallics. Results are contrasted with those obtained by other methods of joining brittle, high-temperature materials, with special focus on durability and mechanical properties.

36 MATERIALS SCIENCE↗

Optical and structural properties of Li{sub 2}O-Al{sub 2}O{sub 3}-B{sub 2}O{sub 3} glasses before and after {gamma}-irradiation effects

The density, molar volume, optical energy bandgap, and infrared absorption spectra in the range 400-4000 nm of borate glasses with composition 2xLi{sub 2}O-xAl{sub 2}O{sub 3}-(1-3x)B{sub 2}O{sub 3} (x varying from 0.10 to 0.18 mol fraction) prepared by conventional melt quench technique have been measured before and after successive {gamma}-ray irradiation at the dose of 2.5 K Gy to elucidate the effect of gamma irradiation on such glasses. The radiation induced defects created by {gamma}-ray and the changes in optical properties have been discussed.

36 MATERIALS SCIENCE↗

Application of SAXS to study particle-size-dependent thermal conductivity in silica nanofluids.

Knowledge of the size and distribution of nanoparticles in solution is critical to understanding the observed enhancements in thermal conductivity and heat transfer of nanofluids. We have applied small-angle X-ray scattering (SAXS) to the characterization of SiO{sub 2} nanoparticles (10-30 nm) uniformly dispersed in a water-based fluid using the Advanced Photon Source at Argonne National Laboratory. Size distributions for the suspended nanoparticles were derived by fitting experimental data to an established model. Thermal conductivity of the SiO{sub 2} nanofluids was also measured, and the relation between the average particle size and the thermal conductivity enhancement was established. The experimental data contradict models based on fluid interfacial layers or Brownian motion but support the concept of thermal resistance at the liquid-particle interface.

43 PARTICLE ACCELERATORS↗

Spin-distribution measurement: A sensitive probe for incomplete fusion dynamics

Spin distributions of various reaction products populated via complete and/or incomplete fusion of {sup 16}O with {sup 169}Tm have been measured at projectile energy {approx_equal}5.6 MeV/nucleon. Particle (Z=1,2) {gamma}-coincidences have been employed to achieve the information about involved reaction modes on the basis of their entry state spin populations. The experimentally measured spin distributions for incomplete fusion products have been found to be distinctly different than those observed for complete fusion products. The driving input angular momenta associated with incomplete fusion products have been found to be relatively higher than complete fusion products, and increases with direct {alpha}-multiplicity. It has also been observed that incomplete fusion products are less fed and/or the population of lower spin states are strongly hindered, while complete fusion products indicating strong feeding over a broad spin range.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

An efficient contextual algorithm to detect subsurface fires with NOAA/AVHRR data

This paper deals with the potential application of National Oceanic and Atmospheric Administration (NOAA)/Advanced Very High Resolution Radiometer (AVHRR) data to detect subsurface fire (subsurface hotspots) by proposing an efficient contextual algorithm. Although few algorithms based on the fixed-thresholding approach have been proposed for subsurface hotspot detection, however, for each application, thresholds have to be specifically tuned to cope with unique environmental conditions. The main objective of this paper is to develop an instrument-independent adaptive method by which direct threshold or multithreshold can be avoided. The proposed contextual algorithm is helpful to monitor subsurface hotspots with operational satellite data, such as the Jharia region of India, without making any region-specific guess in thresholding. Novelty of the proposed work lies in the fact that once the algorithmic model is developed for the particular region of interest after optimizing the model parameters, there is no need to optimize those parameters again for further satellite images. Hence, the developed model can be used for optimized automated detection and monitoring of subsurface hotspots for future images of the particular region of interest. The algorithm is adaptive in nature and uses vegetation index and different NOAA/AVHRR channel's statistics to detect hotspots in the region of interest. The performance of the algorithm is assessed in terms of sensitivity and specificity and compared with other well-known thresholding, techniques such as Otsu's thresholding, entropy-based thresholding, and existing contextual algorithm proposed by Flasse and Ceccato. The proposed algorithm is found to give better hotspot detection accuracy with lesser false alarm rate.

01 COAL, LIGNITE, AND PEAT↗