Search NASA⌕ Search

Engineering topics

Sinha, S.

Publications and source records attributed to Sinha, S..

13 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Effect of low-temperature compression on superconductivity and crystal structure in strontium metal

The superconducting and structural properties of elemental strontium metal were investigated under pressures up to 60 GPa while maintaining cryogenic conditions during pressure application. Applying pressure at low temperatures reveals differences in superconducting and structural phases compared to previous reports obtained at room temperatures. Notably, the superconducting critical temperature exhibits a twofold increase under compression after cryogenic cooling within the pressure range of 35–42 GPa, compared to cryogenic cooling after room-temperature compression. Subsequently, the transition width becomes significantly sharper above 42 GPa. Low-temperature x-ray diffraction measurements under pressure reveal that this change corresponds to the Sr-III to Sr-IV transition, with no evidence of any metastable structure. Furthermore, the monoclinic Sr-IV structure was observed to remain stable to much higher pressures—at least up to 60 GPa, without the appearance of the incommensurate Sr-V phase present at room temperature. As a result, this implies that thermal activation energy plays an important role in overcoming the presence of a kinetic barrier to the Sr-V phase at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Application of advanced causal analyses to identify processes governing secondary organic aerosols

Abstract Understanding how different physical and chemical atmospheric processes affect the formation of fine particles has been a persistent challenge. Inferring causal relations between the various measured features affecting the formation of secondary organic aerosol (SOA) particles is complicated since correlations between variables do not necessarily imply causality. Here, we apply a state-of-the-art information transfer measure coupled with the Koopman operator framework to infer causal relations between isoprene epoxydiol SOA (IEPOX-SOA) and different chemistry and meteorological variables derived from detailed regional model predictions over the Amazon rainforest. IEPOX-SOA represents one of the most complex SOA formation pathways and is formed by the interactions between natural biogenic isoprene emissions and anthropogenic emissions affecting sulfate, acidity and particle water. Since the regional model captures the known relations of IEPOX-SOA with different chemistry and meteorological features, their simulated time series implicitly include their causal relations. We show that our causal model successfully infers the known major causal relations between total particle phase 2-methyl tetrols (the dominant component of IEPOX-SOA over the Amazon) and input features. We provide the first proof of concept that the application of our causal model better identifies causal relations compared to correlation and random forest analyses performed over the same dataset. Our work has tremendous implications, as our methodology of causal discovery could be used to identify unknown processes and features affecting fine particles and atmospheric chemistry in the Earth’s atmosphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Online real-time learning of dynamical systems from noisy streaming data

Abstract Recent advancements in sensing and communication facilitate obtaining high-frequency real-time data from various physical systems like power networks, climate systems, biological networks, etc. However, since the data are recorded by physical sensors, it is natural that the obtained data is corrupted by measurement noise. In this paper, we present a novel algorithm for online real-time learning of dynamical systems from noisy time-series data, which employs the Robust Koopman operator framework to mitigate the effect of measurement noise. The proposed algorithm has three main advantages: (a) it allows for online real-time monitoring of a dynamical system; (b) it obtains a linear representation of the underlying dynamical system, thus enabling the user to use linear systems theory for analysis and control of the system; (c) it is computationally fast and less intensive than the popular extended dynamic mode decomposition (EDMD) algorithm. We illustrate the efficiency of the proposed algorithm by applying it to identify the Van der Pol oscillator, the chaotic attractor of the Henon map, the IEEE 68 bus system, and a ring network of Van der Pol oscillators.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Niobium substitution suppresses the superconducting critical temperature of pressurized MoB 2

A recent study has demonstrated that MoB 2 , transforming to the same structure as MgB 2 (P 6 /mmm), superconducts at temperatures above 30 K near 100 GPa [C. Pei et al., Natl. Sci. Rev. 10, nwad034 (2023)], and Nb substitution in MoB 2 stabilizes the P6/mmm structure down to ambient pressure [A. C. Hire et al., Phys. Rev. B 106, 174515 (2022)]. Here, the current work explores the high-pressure superconducting behavior of Nb-substituted MoB 2 (Nb 0.25 Mo 0.75 B 2 ). High-pressure x-ray diffraction measurements show that the sample remains in the ambient pressure P6/mmm structure to at least 160 GPa. Electrical resistivity measurements demonstrate that from an ambient pressure T c of 8K (confirmed by specific heat to be a bulk effect), the critical temperature is suppressed to 4 K at 50 GPa, before gradually rising to 5.5 K at 170 GPa. The critical temperature at high pressure is thus significantly lower than that found in MoB 2 under pressure (30 K), revealing that Nb substitution results in a strong suppression of the superconducting critical temperature. Our calculations indeed find a reduced electron-phonon coupling in Nb 0.25 Mo 0.75 B 2 , but do not account fully for the observed suppression, which may also arise from inhomogeneity and enhanced spin fluctuations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Creating superconductivity in WB 2 through pressure-induced metastable planar defects

High-pressure electrical resistivity measurements reveal that the mechanical deformation of ultra-hard WB 2 during compression induces superconductivity above 50 GPa with a maximum superconducting critical temperature, T c of 17 K at 91 GPa. Upon further compression up to 187 GPa, the T c gradually decreases. Theoretical calculations show that electron-phonon mediated superconductivity originates from the formation of metastable stacking faults and twin boundaries that exhibit a local structure resembling MgB 2 (hP3, space group 191, prototype AlB 2 ). Synchrotron x-ray diffraction measurements up to 145 GPa show that the ambient pressure hP12 structure (space group 194, prototype WB 2 ) continues to persist to this pressure, consistent with the formation of the planar defects above 50 GPa. The abrupt appearance of superconductivity under pressure does not coincide with a structural transition but instead with the formation and percolation of mechanically-induced stacking faults and twin boundaries. The results identify an alternate route for designing superconducting materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

High critical field superconductivity at ambient pressure in MoB 2 stabilized in the P6/mmm structure via Nb substitution

Recently it was discovered that, under elevated pressures, MoB 2 exhibits superconductivity at a critical temperature T c as high as 32 K. The superconductivity appears to develop following a pressure-induced structural transition from the ambient pressure $\text{R}\bar{3}$⁢m structure to an MgB 2 -like P6/mmm structure. This suggests that remarkably high T c values among diborides are not restricted to MgB 2 as previously appeared to be the case, and that similarly high T c values may occur in other diborides if they can be coerced into the MgB 2 structure. In this paper, we show that density functional theory calculations indicate that phonon free energy stabilizes the P6/mmm structure over the $\text{R}\bar{3}$⁢m at high temperatures across the Nb 1–x ⁢Mo x B 2 series. X-ray diffraction confirms that the synthesized Nb-substituted MoB 2 adopts the MgB 2 crystal structure. Finally, high magnetic field electrical resistivity measurements and specific heat measurements demonstrate that Nb x ⁢Mo 1–x⁢ B 2 exhibits superconductivity with T c as high as 8 K and critical fields approaching 6 T.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Beam power scale-up in micro-electromechanical systems based multi-beam ion accelerators

We report on the development of multi-beam RF linear ion accelerators that are formed from stacks of low cost wafers and describe the status of beam power scale-up using an array of 120 beams. The total argon ion current extracted from the 120-beamlet extraction column was 0.5 mA. The measured energy gain in each RF gap reached as high as 7.25 keV. We present a path of using this technology to achieve ion currents >1 mA and ion energies >100 keV for applications in materials processing.

47 OTHER INSTRUMENTATION↗
NASA NTRS1991

In-situ integrated processing and characterization of thin films of high temperature superconductors, dielectrics and semiconductors by MOCVD

In this strategy of depositing the basic building blocks of superconductors, semiconductors, and dielectrics having common elements, researchers deposited superconducting films of Y-Ba-Cu-O, semiconductor films of Cu2O, and dielectric films of BaF2 and Y2O3 by metal oxide chemical vapor deposition (MOCVD). By switching source materials entering the chamber, and by using direct writing capability, complex device structures like three terminal hybrid semiconductor/superconductor transistors can be fabricated. The Y-Ba-Cu-O superconducting thin films on BaF2/YSZ substrates show a T(sub c) of 80 K and are textured with most of the grains having their c-axis or a-axis perpendicular to the substrate. Electrical characteristics as well as structural characteristics of superconductors and related materials obtained by x-ray deffraction, electron microscopy, and energy dispersive x-ray analysis are discussed.

Singh, R.↗
NASA NTRS1990

In-situ integrated processing and characterization of thin films of high temperature superconductors, dielectrics and semiconductors by MOCVD

In this strategy of depositing the basic building blocks of superconductors, semiconductors, and dielectric having common elements, researchers deposited superconducting films of Y-Ba-Cu-O, semiconductor films of Cu2O, and dielectric films of BaF2 and Y2O3 by metal oxide chemical vapor deposition (MOCVD). By switching source materials entering the chamber, and by using direct writting capability, complex device structures like three-terminal hybrid semiconductors/superconductors transistors can be fabricated. The Y-Ba-Cu-O superconducting thin films on BaF2/YSZ substrates show a T(sub c) of 80 K and are textured with most of the grains having their c-axis or a-axis perpendicular to the substrate. Electrical characteristics as well as structural characteristics of superconductors and related materials obtained by x-ray defraction, electron microscopy, and energy dispersive x-ray analysis are discussed.

Singh, R.↗
NASA NTRS1987

Characterization of graded interface In(x)Ga(1-x)As/In(0.52)Al(0.48)As (x between 0.53 and 0.70) structures grown by molecular-beam epitaxy

Modulation-doped In(x)Ga(1-x)As/In(0.52)Al(0.48)As/InP structures were grown by molecular-beam epitaxy with x values between 53 and 70 percent. For pseudomorphic cases, graded instead of abrupt interfaces were used. Hall mobility and persistent photoconductivity measurements as a function of temperature were used to characterize samples with different structural parameters. Consistent trends in the variation of mobilities and two-dimensional carrier concentration, n(2D), under light and dark conditions have been observed and discussed in terms of applicable scattering mechanisms. The Hall mobilities are comparable to the best results obtained to date but with significantly higher n(2D) concentration.

Peng, C. K.↗
NASA NTRS1985

Search for gamma rays of energy 10(15) eV from Cygnus X-3

Finite flux of excess radiation of energy 10 to the 15th power has been reported by two groups from the direction of Cygnus X-3, with the characteristic periodicity of 4.8 hrs. Samorski and Stamm find that the muon content of the showers generated by this excess radiation is about 77% of that in normal cosmic ray showers, whereas the expectation for gamma ray showers is less than 10%. It is thus difficult to understand the nature of the radiation arriving from the direction of Cygnus X-3. Samorski and Stamm measured the muon densities close to the core (approx. 10 m), where contamination due to other components is severe. Even though this does not explain the high ratio of muon densities, measurements should be carried out away from the core to establish the nature of the radiation. In order to establish the signal from Cygnus X-3 and its muon content with better statistical significance, an extensive air shower array, specifically designed for this purpose was operated at Kolar Gold Fields (longitude: 78 deg .3 E; latitude: + 12 deg .95; atmospheric depth: 920 q/square centimeters) since September, 1984. The details of the array and the accuracy of arrival direction measurements are discussed.

Bhat, P. N.↗
NASA NTRS1985

The hump in the Cerenkov lateral distribution of gamma ray showers

The lateral distribution of atmospheric Cerenkov photons emitted by gamma ray showers of energy 100 GeV is calculated. The lateral distribution shows a characteristic hump at a distance of approx. 135 meter from the core. The hump is shown to be due to electrons of threshold energy 1 GeV, above which the mean scattering angle becomes smaller than the Cerenkov angle.

Sinha, S.↗