Search NASA⌕ Search

Engineering topics

Song, J.

Publications and source records attributed to Song, J..

At least 37 records · Page 2

Dispersive corrections in elastic electron-nucleus scattering: an investigation in the intermediate energy regime and their impact on the nuclear matter

Measurements of elastic electron scattering data within the past decade have highlighted two-photon exchange contributions as a necessary ingredient in theoretical calculations to precisely evaluate hydrogen elastic scattering cross sections. This correction can modify the cross section at the few percent level. In contrast, dispersive effects can cause significantly larger changes from the Born approximation. The purpose of this experiment is to extract the carbon-12 elastic cross section around the first diffraction minimum, where the Born term contributions to the cross section are small to maximize the sensitivity to dispersive effects. The analysis uses the LEDEX data from the high resolution Jefferson Lab Hall A spectrometers to extract the cross sections near the first diffraction minimum of 12 C at beam energies of 362 MeV and 685 MeV. The results are in very good agreement with previous world data, although with less precision. The average deviation from a static nuclear charge distribution expected from linear and quadratic fits indicate a 30.6% contribution of dispersive effects to the cross section at 1 GeV. The magnitude of the dispersive effects near the first diffraction minimum of 12 C has been confirmed to be large with a strong energy dependence and could account for a large fraction of the magnitude for the observed quenching of the longitudinal nuclear response. These effects could also be important for nuclei radii extracted from parity-violating asymmetries measured near a diffraction minimum.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Design of the Universal Neutron Irradiator

SHINE medical isotopes is developing a novel method to produce the medical isotope Mo-99, which is the parent of Tc-99m, the most widely used diagnostic compound in nuclear medicine. This method utilizes U-235 fission in a subcritical liquid target solution, driven by an accelerator-based neutron source that is based on a deuterium-tritium reaction in a gaseous target. In this approach, the neutron-generating target is surrounded by uranyl sulfate (low-enriched uranium); fission in the uranium salt solution efficiently produces the desired Mo-99, as well as other fission products. After irradiation, Mo-99 is separated and the uranyl sulfate solution can be irradiated again to produce Mo-99. This allows the solution to be recycled for a very long time and significantly reduces the amount of associated nuclear waste. SHINE has received U.S. Nuclear Regulatory Commission (NRC) approval to construct an Mo-99 production facility based on this method. In order to produce Mo-99 efficiently, the solution should be as close as possible to criticality. Because the solution is over moderated, any precipitation could push the solution to become critical and thereby hard to control. One of the possible precipitation scenarios is the formation of uranyl peroxide. Under irradiation, water decomposes into the products of radiolysis, some of which will form peroxide. To prevent precipitation, one has to develop a way to decompose the peroxide before it can react with uranium and form hard-to-dissolve precipitates. To study peroxide formation and develop methods to prevent precipitation, we are developing an experiment capable of mimicking radiation conditions in the SHINE system. This report describes the irradiation setup we designed to irradiate a small volume of uranyl sulfate solution for the duration of one SHINE irradiation (~6 days) at the relevant fission power (~0.5 W/cc)

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Analysis of the NorthStar Inconel 718 Window

NorthStar Medical Radioisotopes, LLC, is planning to produce the important medical radioisotope molybdenum-99 (Mo-99) through photonuclear reactions in molybdenum-100 (Mo-100). In this approach, a target comprising multiple thin disks of enriched molybdenum metal will be bombarded with a 40-MeV electron beam. Because enriched Mo-100 is expensive, there is a desire to utilize as much beam power as possible to achieve maximum production yield and minimize the size of the target. This requirement leads to very high beam power density (heat deposition in the target), which sets challenging requirements for cooling of the target. In the latest concept developed by NorthStar, a stack of target (sintered molybdenum) disks is irradiated from two sides by a 40-MeV electron beam, with a total power of 240 kW (120 kW from each side). As shown in Figure 1, the target disks are cooled by pressurized helium gas flowing through channels between the disks. A housing encloses the target disks and helium coolant. Thinned regions on opposite sides of the housing act as windows, forming the pressure boundary between the helium within the housing and the evacuated beam tube. A pulsed (50-Hz) 40-MeV electron beam is used, with 120 kW total power and a 10% duty cycle. The pulsing beam creates a corresponding cyclic thermal load within the window material. To examine the effects of the cyclic thermal load on the window, a combination of analyses was performed, including computational fluid dynamics (CFD) and finite element analysis (FEA). The analyses presented in this report were primarily performed using the finite element method. However, because of the curved surface of the window, CFD analysis was used to calculate the convective cooling boundary included in the FEA model. Transient thermal and structural models were used to explore the window geometry, including thickness, radius of curvature, and diameter, while staying within the temperature and stress limits of the material as well as maintaining mechanical stability (i.e., avoiding buckling). Additionally, variations in the size and location of the electron beam were evaluated. Multiple parameters for the window and the electron beam were examined throughout the analysis. Upper and lower bounds were established for the window geometry parameters, and limitations were established for the size and position of the electron beam.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Galaxies in X-ray selected clusters and groups in Dark Energy Survey data – II. Hierarchical Bayesian modelling of the red-sequence galaxy luminosity function

Using ~100 X-ray selected clusters in the Dark Energy Survey Science Verification data, in this work we constrain the luminosity function (LF) of cluster red-sequence galaxies as a function of redshift. This is the first homogeneous optical/X-ray sample large enough to constrain the evolution of the LF simultaneously in redshift (0.1 < z < 1.05) and cluster mass ($13.5 \le \rm {log_{10}}(M_{200crit}) \sim \lt 15.0$). We pay particular attention to completeness issues and the detection limit of the galaxy sample. We then apply a hierarchical Bayesian model to fit the cluster galaxy LFs via a Schechter function, including its characteristic break (m*) to a faint end power-law slope (α). Our approach allows us to avoid known issues in similar analyses based on stacking or binning the clusters. We find weak and statistically insignificant (~1.9σ) evolution in the faint end slope α versus redshift. We also find no dependence in α or m* with the X-ray inferred cluster masses. Yet, the amplitude of the LF as a function of cluster mass is constrained to ${\sim } 20{{\ \rm per\ cent}}$ precision. As a by-product of our algorithm, we utilize the correlation between the LF and cluster mass to provide an improved estimate of the individual cluster masses as well as the scatter in true mass given the X-ray inferred masses. This technique can be applied to a larger sample of X-ray or optically selected clusters from the Dark Energy Survey, greatly improving the sensitivity of the analysis.

79 ASTRONOMY AND ASTROPHYSICS↗

Ferroelectric polarization control of magnetic anisotropy in PbZ r 0.2 T i 0.8 O 3 / L a 0.8 S r 0.2 Mn O 3 heterostructures

The interfacial coupling between the switchable polarization and neighboring magnetic order makes ferroelectric/ferromagnetic composite structures a versatile platform to realize voltage control of magnetic anisotropy. Here, we report the nonvolatile ferroelectric field effect modulation of the magnetocrystalline anisotropy (MCA) in epitaxial PbZ r 0.2 T i 0.8 O 3 (PZT)/ L a 0.8 S r 0.2 Mn O 3 (LSMO) heterostructures grown on (001) SrTi O 3 substrates. Planar Hall effect measurements show that the in-plane magnetic anisotropy energy in LSMO is enhanced by about 22% in the hole accumulation state compared to the depletion state, in quantitative agreement with our first-principles density functional theory calculations. Modeling the spin-orbit coupling effect with second-order perturbation theory points to the critical role of the d -orbital occupancy in controlling MCA. Our work provides insights into the effect of ferroelectric polarization on the magnetic anisotropy at the composite multiferroic interfaces, paving the way for their implementation into high-performance, low-power spintronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure-Induced Superconductivity in Elemental Ytterbium Metal

Ytterbium (Yb) metal is divalent and nonmagnetic (4f 14 configuration). Under pressure its valence increases significantly leading to the expectation that magnetic instabilities and other highly correlated electron effects may appear before a stable trivalent state is reached (4f 13 configuration). We carried out electrical resistivity and ac magnetic susceptibility measurements to 179 GPa over the temperature range 1.4 - 295 K. No evidence for magnetic order is observed. However, Yb becomes a superconductor at 86 GPa with T c ≃1.4 K, increasing to 4.6 K at 179 GPa. X-ray absorption spectroscopy shows that Yb remains mixed-valent to at least 125 GPa, pointing to an active role of $f$ electrons in the emergence of superconductivity in this simple, elemental solid.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Novel Coordination Polymer Based on Trinuclear Cobalt Building Blocks Cluster: Synthesis, Crystal Structure, and Properties

The title compound {[Co_3(μ_3-OH)(μ_2-H_2O)2(H_2O)_5(BTC)_2] · 6H_2O}{sub n} (H{sub 3}BTC is a 1,3,5-benzenetricarboxylic acid) was prepared and characterized by single crystal and powder X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric and elemental analyses. The single crystal X-ray diffraction reveals that the title compound consists of 1D infinite zigzag chains which were constructed by trinuclear cobalt cluster and BTC{sup 3–} ligand. Neighbouring above-mentioned 1D infinite zigzag chains are further linked by intermolecular hydrogen bonding to form a 3D supermolecular structure. In addition, the luminescent properties of the title compound were investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evidence for strong enhancement of the magnetic ordering temperature of trivalent Nd metal under extreme pressure [Anomalous enhancement of the magnetic ordering temperature of trivalent Nd metal under extreme pressure: Possible Kondo lattice behavior]

Four-point electrical resistivity measurements were carried out on Nd metal and dilute magnetic alloys containing up to 1 at.% Nd in superconducting Y for temperatures 1.5–295 K under pressures to 210 GPa. The magnetic ordering temperature T o of Nd appears to rise steeply under pressure, increasing ninefold to 180 K at 70 GPa before falling rapidly. Y(Nd) alloys display both a resistivity minimum and superconducting pair breaking ΔT c as large as 38 K/at.% Nd. The present results give evidence that for pressures above 30–40 GPa, the exchange coupling J between Nd ions and conduction electrons becomes negative, thus activating Kondo physics in this highly correlated electron system. Furthermore, the rise and fall of T o and ΔT c with pressure can be accounted for in terms of an increase in the Kondo temperature.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Cosmological constraints from galaxy clusters in the 2500 square-degree SPT-SZ survey

We present cosmological parameter constraints obtained from galaxy clusters identified by their Sunyaev–Zel’dovich effect signature in the 2500 square-degree South Pole Telescope Sunyaev Zel’dovich (SPT-SZ) survey. We consider the 377 cluster candidates identified at z>0.25 with a detection significance greater than five, corresponding to the 95% purity threshold for the survey. We compute constraints on cosmological models using the measured cluster abundance as a function of mass and redshift. We include additional constraints from multi-wavelength observations, including Chandra X-ray data for 82 clusters and a weak lensing-based prior on the normalization of the mass-observable scaling relations. Assuming a spatially flat ΛCDM cosmology, we combine the cluster data with a prior on H {sub 0} and find σ{sub 8}=0.784±0.039 and Ω{sub m}=0.289±0.042, with the parameter combination σ{sub 8}(Ω{sub m}/0.27){sup 0.3}=0.797±0.031. These results are in good agreement with constraints from the cosmic microwave background (CMB) from SPT, WMAP, and Planck, as well as with constraints from other cluster data sets. We also consider several extensions to ΛCDM, including models in which the equation of state of dark energy w, the species-summed neutrino mass, and/or the effective number of relativistic species (N{sub eff}) are free parameters. When combined with constraints from the Planck CMB, H {sub 0}, baryon acoustic oscillation, and SNe, adding the SPT cluster data improves the w constraint by 14%, to w=−1.023±0.042.

79 ASTRONOMY AND ASTROPHYSICS↗

Galaxies in X-Ray Selected Clusters and Groups in Dark Energy Survey Data. I. Stellar Mass Growth of Bright Central Galaxies Since z ~ 1.2

Using the science verification data of the Dark Energy Survey for a new sample of 106 X-ray selected clusters and groups, we study the stellar mass growth of bright central galaxies (BCGs) since redshift z ~ 1.2. Compared with the expectation in a semi-analytical model applied to the Millennium Simulation, the observed BCGs become under-massive/under-luminous with decreasing redshift. Here, we incorporate the uncertainties associated with cluster mass, redshift, and BCG stellar mass measurements into an analysis of a redshift-dependent BCG-cluster mass relation, $m_*$ $∝ \huge{(}$$\frac{M_{200}}{1.5x10^{14}M_⊙}\huge{)}$$^{0.24±0.08}$ $(1 + z)$$^{-0.19±0.34}$, and compare the observed relation to the model prediction. We estimate the average growth rate since z = 1.0 for BCGs hosted by clusters of M 200,z = 10 13.8 M ⊙ ; at z = 1.0: m * , BCG appears to have grown by 0.13 ± 0.11 dex, in tension at the ~2.5σ significance level with the 0.40 dex growth rate expected from the semi-analytic model. We show that the build-up of extended intracluster light after z = 1.0 may alleviate this tension in BCG growth rates.

79 ASTRONOMY AND ASTROPHYSICS↗

Baryon content of massive galaxy clusters at 0.57 < z < 1.33

We study the stellar, brightest cluster galaxy (BCG) and intracluster medium (ICM) masses of 14 South Pole Telescope (SPT) selected galaxy clusters with median redshift z = 0.9 and mass M-500 = 6 x 10(14) M-circle dot. We estimate stellar masses for each cluster and BCG using six photometric bands, the ICM mass using X-ray observations and the virial masses using the SPT Sunyaev-Zel'dovich effect signature. At z = 0.9, the BCG mass M-*(BCG) constitutes 0.12 +/- 0.01 per cent of the halo mass for a 6 x 10(14) M-circle dot cluster, and this fraction falls as M-500(-0.58 +/- 0.07). The cluster stellar mass function has a characteristic mass M-0 = 10(11.0 +/- 0.1) M-circle dot, and the number of galaxies per unit mass in clusters is larger than in the field by a factor of 1.65 +/- 0.20. We combine our SPT sample with previously published samples at low redshift and correct to a common initial mass function and for systematic virial mass differences. We then explore mass and redshift trends in the stellar fraction f(*), the ICM fraction f(ICM), the collapsed baryon fraction f(c) and the baryon fraction f(b). At a pivot mass of 6 x 10(14) M-circle dot and redshift z = 0.9, the characteristic values are f(*) = 1.1 +/- 0.1 per cent, f(ICM) = 9.6 +/- 0.5 per cent, f(c) = 10.7 +/- 1.1 per cent and f(b) = 10.7 +/- 0.6 per cent. These fractions all vary with cluster mass at high significance, with higher mass clusters having lower f(*) and f(c) and higher f(ICM) and f(b). When accounting for a 15 per cent systematic virial mass uncertainty, there is no statistically significant redshift trend at fixed mass. Our results support the scenario where clusters grow through accretion from subclusters (higher f(*), lower f(ICM)) and the field (lower f(*), higher f(ICM)), balancing to keep f(*) and f(ICM) approximately constant since z similar to 0.9.

Chiu, I.↗

A Measurement of Gravitational Lensing of the Cosmic Microwave Background by Galaxy Clusters Using Data from the South Pole Telescope

Clusters of galaxies are expected to gravitationally lens the cosmic microwave background (CMB) and thereby generate a distinct signal in the CMB on arcminute scales. Measurements of this effect can be used to constrain the masses of galaxy clusters with CMB data alone. Here we present a measurement of lensing of the CMB by galaxy clusters using data from the South Pole Telescope (SPT). We also develop a maximum likelihood approach to extract the CMB cluster lensing signal and validate the method on mock data. We quantify the effects on our analysis of several potential sources of systematic error and find that they generally act to reduce the best-fit cluster mass. It is estimated that this bias to lower cluster mass is roughly 0.85σ in units of the statistical error bar, although this estimate should be viewed as an upper limit. Furthermore, we apply our maximum likelihood technique to 513 clusters selected via their Sunyaev–Zeldovich (SZ) signatures in SPT data, and rule out the null hypothesis of no lensing at 3.1σ. The lensing-derived mass estimate for the full cluster sample is consistent with that inferred from the SZ flux: M 200,lens = 0.83 +0.38 -0.37 M 200,SZ (68% C.L., statistical error only).

79 ASTRONOMY AND ASTROPHYSICS↗

Resistance controllability and variability improvement in a TaO{sub x}-based resistive memory for multilevel storage application

In order to obtain reliable multilevel cell (MLC) characteristics, resistance controllability between the different resistance levels is required especially in resistive random access memory (RRAM), which is prone to resistance variability mainly due to its intrinsic random nature of defect generation and filament formation. In this study, we have thoroughly investigated the multilevel resistance variability in a TaO{sub x}-based nanoscale (<30 nm) RRAM operated in MLC mode. It is found that the resistance variability not only depends on the conductive filament size but also is a strong function of oxygen vacancy concentration in it. Based on the gained insights through experimental observations and simulation, it is suggested that forming thinner but denser conductive filament may greatly improve the temporal resistance variability even at low operation current despite the inherent stochastic nature of resistance switching process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

X-ray cavities in a sample of 83 SPT-selected clusters of galaxies: Tracing the evolution of AGN feedback in clusters of galaxies out to z = 1.2

X-ray cavities are key tracers of mechanical (or radio mode) heating arising from the active galactic nuclei (AGNs) in brightest cluster galaxies (BCGs). We report on a survey for X-ray cavities in 83 massive, high-redshift (0.4 7 Gyr at z∼0.8). On average, the detected X-ray cavities have powers of (0.8−5)×10{sup 45} erg s{sup −1}, enthalpies of (3−6)×10{sup 59} erg, and radii of ∼17 kpc. Integrating over 7 Gyr, we find that the supermassive black holes in BCGs may have accreted 10{sup 8} to several 10{sup 9} M{sub ⊙} of material to power these outflows. This level of accretion indicates that significant supermassive black hole growth may occur not only at early times, in the quasar era, but at late times as well. We also find that X-ray cavities at high redshift may inject an excess heat of 0.1–1.0 keV per particle into the hot ICM above and beyond the energy needed to offset cooling. Although this result needs to be confirmed, we note that the magnitude of excess heating is similar to the energy needed to preheat clusters, break self-similarity, and explain the excess entropy in hot atmospheres.

79 ASTRONOMY AND ASTROPHYSICS↗

Modeling the impact of agricultural land use and management on US carbon budgets

Cultivation of the terrestrial land surface can create either a source or sink of atmospheric CO 2 , depending on land management practices. The Community Land Model (CLM) provides a useful tool for exploring how land use and management impact the soil carbon pool at regional to global scales. CLM was recently updated to include representation of managed lands growing maize, soybean, and spring wheat. In this study, CLM-Crop is used to investigate the impacts of various management practices, including fertilizer use and differential rates of crop residue removal, on the soil organic carbon (SOC) storage of croplands in the continental United States over approximately a 170-year period. Results indicate that total US SOC stocks have already lost over 8 Pg C (10%) due to land cultivation practices (e.g., fertilizer application, cultivar choice, and residue removal), compared to a land surface composed of native vegetation (i.e., grasslands). After long periods of cultivation, individual subgrids (the equivalent of a field plot) growing maize and soybean lost up to 65% of the carbon stored compared to a grassland site. Crop residue management showed the greatest effect on soil carbon storage, with low and medium residue returns resulting in additional losses of 5 and 3.5%, respectively, in US carbon storage, while plots with high residue returns stored 2% more carbon. Nitrogenous fertilizer can alter the amount of soil carbon stocks significantly. Under current levels of crop residue return, not applying fertilizer resulted in a 5% loss of soil carbon. Our simulations indicate that disturbance through cultivation will always result in a loss of soil carbon, and management practices will have a large influence on the magnitude of SOC loss.

54 ENVIRONMENTAL SCIENCES↗

The permeation behavior of deuterium through 1Cr18Ni9Ti stainless steel with TiN+TiC-TiN multiple films

The prevention of tritium losses via permeation through structure components is an important issue in fusion technology. The production of thin layers on materials with low diffusivity and/or low surface recombination constants (so-called permeation barriers) seems to be the most practical method to reduce or hinder the permeation of tritium through materials. TiN+TiC+TiN multiple films are deposited on the surface of 1Cr18Ni9Ti stainless steel by ion-beam assisted deposition technology. The characteristics of films are tested by XPS ASEM and XRD, which shows that the film are compact and uniform with a thickness of about 15 μm, and have a good adherence with the substrate below 773 K. The diffraction peaks in the XRD patterns for TiC and TiN are broadened, implying that the multiple films are deposited on the surface of 1Cr18Ni9Ti stainless steel. Meanwhile, the C-H bonded CH{sub 4}-appears in the infrared spectra of multiple films, suggesting that the CH{sub 4}- is in a static state, so hydrogen atom cannot migrate from the site bonded with carbon to a neighboring site. The measured deuterium permeability in 1Cr18Ni9Ti stainless steel coated with multiple films is 2-3 orders of magnitude lower than that of pure 1Cr18Ni9Ti stainless steel substrate from 473 K to 773 K. However, this barrier is partly destroyed above 773 K.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

GALAXY CLUSTERS DISCOVERED VIA THE SUNYAEV-ZEL'DOVICH EFFECT IN THE 2500-SQUARE-DEGREE SPT-SZ SURVEY

We present a catalog of galaxy clusters selected via their Sunyaev-Zel'dovich (SZ) effect signature from 2500 deg{sup 2} of South Pole Telescope (SPT) data. This work represents the complete sample of clusters detected at high significance in the 2500 deg{sup 2} SPT-SZ survey, which was completed in 2011. A total of 677 (409) cluster candidates are identified above a signal-to-noise threshold of ξ = 4.5 (5.0). Ground- and space-based optical and near-infrared (NIR) imaging confirms overdensities of similarly colored galaxies in the direction of 516 (or 76%) of the ξ > 4.5 candidates and 387 (or 95%) of the ξ > 5 candidates; the measured purity is consistent with expectations from simulations. Of these confirmed clusters, 415 were first identified in SPT data, including 251 new discoveries reported in this work. We estimate photometric redshifts for all candidates with identified optical and/or NIR counterparts; we additionally report redshifts derived from spectroscopic observations for 141 of these systems. The mass threshold of the catalog is roughly independent of redshift above z ∼ 0.25 leading to a sample of massive clusters that extends to high redshift. The median mass of the sample is M {sub 500c}(ρ{sub crit}) ∼3.5×10{sup 14} M{sub ⊙} h{sub 70}{sup −1}, the median redshift is z {sub med} = 0.55, and the highest-redshift systems are at z > 1.4. The combination of large redshift extent, clean selection, and high typical mass makes this cluster sample of particular interest for cosmological analyses and studies of cluster formation and evolution.

79 ASTRONOMY AND ASTROPHYSICS↗