Search NASA⌕ Search

Engineering topics

Song, J.

Publications and source records attributed to Song, J..

At least 55 records · Page 3

Fluorinated Electrolytes for Li-S Battery: Suppressing the Self-Discharge with an Electrolyte Containing Fluoroether Solvent

The fluorinated electrolyte containing a fluoroether 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether (TTE) was investigated as a new electrolyte for lithium-sulfur (Li-S) batteries. The low solubility of lithium polysulfides (LiPS) in the fluorinated electrolyte reduced the parasitic reactions with Li anode and mitigated the self-discharge by limiting their diffusion from the cathode to the anode. The use of fluorinated ether as a co-solvent and LiNO3 as an additive in the electrolyte shows synergetic effect in suppressing the self-discharge of Li-S battery due to the formation of the solid electrolyte interphase (SEI) on both sulfur cathode and the lithium anode. The Li-S cell with the fluorinated electrolyte showed prolonged shelf life at fully charged state.

Fluorinated electrolyte↗

SPT-CL J2040–4451: An SZ-selected galaxy cluster at z = 1.478 with significant ongoing star formation

SPT-CL J2040–4451—spectroscopically confirmed at z = 1.478—is the highest-redshift galaxy cluster yet discovered via the Sunyaev-Zel'dovich effect. SPT-CL J2040–4451 was a candidate galaxy cluster identified in the first 720 deg{sup 2} of the South Pole Telescope Sunyaev-Zel'dovich (SPT-SZ) survey, and has been confirmed in follow-up imaging and spectroscopy. From multi-object spectroscopy with Magellan-I/Baade+IMACS we measure spectroscopic redshifts for 15 cluster member galaxies, all of which have strong [O II] λλ3727 emission. SPT-CL J2040–4451 has an SZ-measured mass of M {sub 500,} {sub SZ} = 3.2 ± 0.8 × 10{sup 14} M {sub ☉} h {sub 70}{sup −1}, corresponding to M {sub 200,} {sub SZ} = 5.8 ± 1.4 × 10{sup 14} M {sub ☉} h {sub 70}{sup −1}. The velocity dispersion measured entirely from blue star-forming members is σ {sub v} = 1500 ± 520 km s{sup –1}. The prevalence of star-forming cluster members (galaxies with >1.5 M {sub ☉} yr{sup –1}) implies that this massive, high-redshift cluster is experiencing a phase of active star formation, and supports recent results showing a marked increase in star formation occurring in galaxy clusters at z ≳ 1.4. We also compute the probability of finding a cluster as rare as this in the SPT-SZ survey to be >99%, indicating that its discovery is not in tension with the concordance ΛCDM cosmological model.

79 ASTRONOMY AND ASTROPHYSICS↗

Structural Dynamics of GaN Microcrystals in Evolutionary Selection Selective Area Growth probed by X-ray Microdiffraction

A method to grow high quality, single crystalline semiconductor material irrespective of the substrate would allow a cost-effective improvement to functionality and performance of optoelectronic devices. Recently, a novel type of substrate-insensitive growth process called Evolutionary Selection Selective Area Growth (ES-SAG) has been proposed. Here we report the use of X-ray microdiffraction to study the structural properties of GaN microcrystals grown by ES-SAG. Utilizing high resolution in both direct and reciprocal spaces, we have unraveled structural dynamics of GaN microcrystals in growth structures of different dimensions. It has been found that the geometric proportions of the growth constrictions play an important role: 2.6 mm and 4.5 mm wide growth tunnels favor the evolutionary selection mechanism, contrary to the case of 8.6 mm growth tunnels. It was also found that GaN microcrystal ensembles are dominated by slight tensile strain irrespective of growth tunnel shape.

CHARACTERIZATION AND ANALYTICAL TECHNIQUES↗

A thousand-fold enhancement of photoluminescence in porous silicon using ion irradiation

A large increase in the porosity of highly doped p-type silicon is observed at the end-of-range depth of high-energy ions after subsequent electrochemical anodization. This occurs under certain conditions of irradiation geometry and fluence, owing to the dual effects of increased wafer resistivity and a locally increased current density during anodization. This results in the creation of highly porous, sub-surface zones which emit photoluminescence with an intensity of more than three orders of magnitude greater than the surrounding mesoporous silicon, comparable to that produced by microporous silicon. This provides means of selectively enhancing and patterning the photoluminescence emission from micron-sized areas of porous silicon over a wide range of intensity.

36 MATERIALS SCIENCE↗

REDSHIFTS, SAMPLE PURITY, AND BCG POSITIONS FOR THE GALAXY CLUSTER CATALOG FROM THE FIRST 720 SQUARE DEGREES OF THE SOUTH POLE TELESCOPE SURVEY

We present the results of the ground- and space-based optical and near-infrared (NIR) follow-up of 224 galaxy cluster candidates detected with the Sunyaev-Zel'dovich (SZ) effect in the 720 deg{sup 2} of the South Pole Telescope (SPT) survey completed in the 2008 and 2009 observing seasons. We use the optical/NIR data to establish whether each candidate is associated with an overdensity of galaxies and to estimate the cluster redshift. Most photometric redshifts are derived through a combination of three different cluster redshift estimators using red-sequence galaxies, resulting in an accuracy of {Delta}z/(1 + z) = 0.017, determined through comparison with a subsample of 57 clusters for which we have spectroscopic redshifts. We successfully measure redshifts for 158 systems and present redshift lower limits for the remaining candidates. The redshift distribution of the confirmed clusters extends to z = 1.35 with a median of z{sub med} = 0.57. Approximately 18% of the sample with measured redshifts lies at z > 0.8. We estimate a lower limit to the purity of this SPT SZ-selected sample by assuming that all unconfirmed clusters are noise fluctuations in the SPT data. We show that the cumulative purity at detection significance {xi} > 5({xi} > 4.5) is {>=}95% ({>=}70%). We present the red brightest cluster galaxy (rBCG) positions for the sample and examine the offsets between the SPT candidate position and the rBCG. The radial distribution of offsets is similar to that seen in X-ray-selected cluster samples, providing no evidence that SZ-selected cluster samples include a different fraction of recent mergers from X-ray-selected cluster samples.

79 ASTRONOMY AND ASTROPHYSICS↗

A MULTIBAND STUDY OF THE GALAXY POPULATIONS OF THE FIRST FOUR SUNYAEV-ZEL'DOVICH EFFECT SELECTED GALAXY CLUSTERS

We present first results of an examination of the optical properties of the galaxy populations in Sunyaev-Zel'dovich Effect (SZE) selected galaxy clusters. Using clusters selected by the South Pole Telescope survey and deep multiband optical data from the Blanco Cosmology Survey, we measure the radial profile, the luminosity function (LF), the blue fraction, and the halo occupation number (HON) of the galaxy populations of these four clusters with redshifts ranging from 0.3 to 1. Our goal is to understand whether there are differences among the galaxy populations of these SZE-selected clusters and previously studied clusters selected in the optical and the X-ray. The radial distributions of galaxies in the four systems are consistent with Navarro-Frenk-White profiles with a galaxy concentration of 3 to 6. We show that the characteristic luminosities in griz bands are consistent with passively evolving populations emerging from a single burst at redshift z = 3. The faint-end power-law slope of the LF is found to be on average {alpha} {approx} -1.2 in griz. HONs (to m* + 2) for these systems appear to be consistent with those based on X-ray-selected clusters. The blue fraction estimated to 0.36 L*, for the three lower redshift systems, suggests an increase with redshift, although with the current sample the uncertainties are still large. Overall, this pilot study of the first four clusters provides no evidence that the galaxy populations in these systems differ significantly from those in previously studied cluster populations selected in the X-ray or the optical.

79 ASTRONOMY AND ASTROPHYSICS↗

Polarization observables in deuteron photodisintegration below 360 MeV.

High precision measurements of induced and transferred recoil proton polarization in d({rvec y}, {rvec p})n have been performed for photon energies of 277-357 MeV and {theta}cm = 20{sup o}-120{sup o}. The measurements were motivated by a longstanding discrepancy between meson-baryon model calculations and data at higher energies. At the low energies of this experiment, theory continues to fail to reproduce the data, indicating that either something is missing in the calculations and/or there is a problem with the accuracy of the nucleon-nucleon potential being used.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Mechanics of stretchable inorganic electronic materials

Electronic systems that offer elastic mechanical responses to high strain deformation are of growing interest due to their ability to enable new applications whose requirements are impossible to satisfy with conventional wafer-based technologies. This article reviews the mechanics of stretchable inorganic materials on compliant substrates. Specifically, three forms of stretchable structures are reviewed. The first one is stretchable ribbon, which provides one-dimensional stretchability. The second is stretchable nanomembranes, which can be stretched in all directions. Here, the last is a noncoplanar mesh design, which has the advantage of providing large stretchability up to and exceeding 100%. Mechanics models and their comparison to experiment are reviewed for these three cases. Such models provide design guidelines for stretchable electronics.

36 MATERIALS SCIENCE↗

Impact design methods for ceramic components in gas turbine engines

Methods currently under development to design ceramic turbine components with improved impact resistance are presented. Two different modes of impact damage are identified and characterized, i.e., structural damage and local damage. The entire computation is incorporated into the EPIC computer code. Model capability is demonstrated by simulating instrumented plate impact and particle impact tests.

Song, J.↗

Development of impact design methods for ceramic gas turbine components

Impact damage prediction methods are being developed to aid in the design of ceramic gas turbine engine components with improved impact resistance. Two impact damage modes were characterized: local, near the impact site, and structural, usually fast fracture away from the impact site. Local damage to Si3N4 impacted by Si3N4 spherical projectiles consists of ring and/or radial cracks around the impact point. In a mechanistic model being developed, impact damage is characterized as microcrack nucleation and propagation. The extent of damage is measured as volume fraction of microcracks. Model capability is demonstrated by simulating late impact tests. Structural failure is caused by tensile stress during impact exceeding material strength. The EPIC3 code was successfully used to predict blade structural failures in different size particle impacts on radial and axial blades.

Song, J.↗