Search NASA⌕ Search

Engineering topics

Sun, Chengjun

Publications and source records attributed to Sun, Chengjun.

At least 37 records · Page 2

Synergistic effect of polyaniline on stabilizing Pt nanoparticles in PEMFCs†

The stability of Pt nanoparticles on a carbon support is crucial for the lifespan of polymer electrolyte membrane fuel cells as well as other electrocatalysis systems such as electrolyzers. Here we took the approach of utilizing the covalently grafted polyaniline on carbon to stabilize Pt nanoparticles by simultaneously alleviating the particle migration and mitigating the Ostwald ripening, which are two major mechanisms for loss of the catalyst stability. A comprehensive investigation of the stability and performance of Pt catalyst nanoparticles on these supports reveals that the polyaniline can shift the Pt L edge binding energy and the Pt 4f peak energy, leading to the increased redox potential of the Pt nanoparticles and making them more resistant to oxidation. Interestingly, the highest polyaniline density (50 wt%) does not show the best catalyst stability, rather, the second (33 wt%) demonstrates the best catalyst stability among these catalysts. Combining the XPS, XAS and fuel cell stability studies, we concluded that the locations of the Pt nanoparticles over the polyaniline layer on the carbon surface depend on the surface density of the polyaniline over the carbon surface. The Pt nanoparticles in the 50 wt% polyaniline catalyst are wrapped by the polyaniline polymer but do not sit directly on the carbon surface, while Pt nanoparticles in the 33 wt% polyaniline catalyst sit on the carbon surface and are densely surrounded by the polyaniline polymer. The results show that the mass activity loss is 12.5% while the ECSA (electrochemically active surface area) loss is 37.1% after 30k cycles of accelerating stress test for the 33 wt% polyaniline catalyst, far exceeding the DOE 2020 target for MEA (i.e., mass activity loss < 50%, and ECSA loss < 40%). Overall, the polyaniline has a synergistic effect on mitigating the surface migration and slowing down the Ostwald ripening to stabilize the Pt nanoparticles in fuel cells. The novel strategy to stabilize Pt nanoparticles using polyaniline opens a new pathway in the development of highly stable catalysts: relying on the functionalization group on the carbon support, instead of just focusing on the catalyst itself.

Li, Chenzhao↗

Reversible Iron Oxyfluoride (FeOF)–Graphene Composites as Sustainable Cathodes for High Energy Density Lithium Batteries

Two large barriers are impeding the wide implementation of electric vehicles, namely driving-range and cost, primarily due to the low specific energy and high cost of mono-valence cathodes used in lithium-ion batteries. Iron is the ideal element for cathode materials considering its abundance, low cost and toxicity. However, the poor reversibility of (de)lithiation and low electronic conductivity prevent iron-based high specific energy multi-valence conversion cathodes from practical applications. In this work, a sustainable FeOF nanocomposite is developed with extraordinary performance. The specific capacity and energy reach 621 mAh g –1 and 1124 Wh kg –1 with more than 100 cycles, which triples the specific capacity, and doubles the specific energy of current mono-valence intercalation LiCoO 2 . This is the result of an effective approach, combing the nanostructured FeOF with graphene, realized by making the (de)lithiation reversible by immobilizing FeOF nanoparticles and the discharge products over the graphene surface and providing the interparticle electric conduction. Importantly, it demonstrates that introducing small amount of graphene can create new materials with desired properties, opening a new avenue for altering the (de)lithiation process. Finally, such extraordinary performance represents a significant breakthrough in developing sustainable conversion materials, eventually overcoming the driving range and cost barriers.

25 ENERGY STORAGE↗

Latticed-Confined Conversion Chemistry of Battery Electrode

The electrochemical conversion reaction, usually featured by multiple redox processes and high specific capacity, holds great promise in developing high energy rechargeable battery technologies. However, the complete structural change accompanied by spontaneous atomic migration and volume variation during the charge/discharge cycle leads to electrode disintegration and performance degradation, therefore severely restricting the application of conventional conversion-type electrodes. Herein, latticed-confined conversion chemistry is proposed, where the “intercalation-like” redox behavior is realized on the electrode with a “conversion-like” high capacity. By delicately formulating the high-entropy compounds, the pristine crystal structure can be preserved by the inert lattice framework, thus enabling an ultra-high initial Coulombic efficiency of 92.5% and a long cycling lifespan over a thousand cycles after the quasistatic charge–discharge cycle. This lattice-confined conversion chemistry unfolds a ubiquitous insight into the localized redox reaction and sheds light on developing high-performance electrodes toward next-generation high-energy rechargeable batteries.

25 ENERGY STORAGE↗

Interfacial antiferromagnetic phase induced two-step magnetization reversal in PbZr 0.52 Ti 0.48 O3/La 0.67 Sr 0.33 MnO 3 superlattices

Artificial multiferroic heterostructures have recently attracted much interests due to the demonstrated magnetoelectric coupling (MEC) and unique functionalities, promising a tantalizing perspective of novel applications in next-generation electronic, memory, sensor, and energy harvesting technologies. Herein, we report a two-step magnetization reversal in PbZr 0.52 Ti 0.48 O 3 /La 0.67 Sr 0.33 MnO 3 (PZT/LSMO) superlattices, which originates from the strongly entangled strain-, ferroelectric (FE)-polarization-, and exchange-dependent effects. Specifically, the preferential occupancy of the in-plane Mn d x 2 -y 2 orbitals is triggered via the collective effects of the large tensile strain and FE polarization, giving rise to an interfacial antiferromagnetic (AFM) layer with strong AFM anisotropy. The strong spin exchange coupling between the AFM layer and the adjacent ferromagnetic (FM) layer facilitates the magnetic stratification of the FM layer, leading to two coercivities, i.e., two-step magnetization reversal. Meanwhile, a sizeable exchange bias (EB) field is induced. The emerged two-step magnetization reversal concomitant with the pronounced EB phenomenon should be a signature of an enhanced MEC in PZT/LSMO superlattices. Finally, our results will stimulate further interests in multiferroic superlattices in applications of multiferroic-based devices.

36 MATERIALS SCIENCE↗

Conformal PEDOT Coating Enables Ultra-High-Voltage and High-Temperature Operation for Single-Crystal Ni-Rich Cathodes

Single-crystal Ni-rich Li[Ni x Mn y Co 1-x-y ]O 2 (SC-NMC) cathodes represent a promising approach to mitigate the cracking issue of conventional polycrystalline cathodes. However, many reported SC-NMC cathodes still suffer from unsatisfactory cycling stability, particularly under high charge cutoff voltage and/or elevated temperature. Herein, we report an ultraconformal and durable poly(3,4-ethylenedioxythiophene) (PEDOT) coating for SC-NMC cathodes using an oxidative chemical vapor deposition (oCVD) technique, which significantly improves their high-voltage (4.6 V) and high-temperature operation resiliency. The PEDOT coated SC LiNi 0.83 Mn 0.1 Co 0.07 O 2 (SC-NMC83) delivers an impressive capacity retention rate of 96.7% and 89.5% after 100 and 200 cycles, respectively. Significantly, even after calendar aging at 45 degrees C and 4.6 V, the coated cathode can still retain 85.3% (in comparison with 59.6% for the bare one) of the initial capacity after 100 cycles at a 0.5 C rate. Synchrotron X-ray experiments and interface characterization collectively reveal that the conformal PEDOT coating not only effectively stabilizes the crystallographic structure and maintains the integrity of the particles but also significantly suppresses the electrolyte's corrosion, resulting in improved electrochemical/thermal stability. Our findings highlight the promise of an oCVD PEDOT coating for single-crystal Ni-rich cathodes to meet the grand challenge of high-energy batteries under extreme conditions.

25 ENERGY STORAGE↗

Atomically dispersed Ag on δ-MnO 2 via cation vacancy trapping for toluene catalytic oxidation

The regulation of metal–support interaction (MSI) and the improvement of noble metal utilization are the frontiers of volatile organic compound (VOC) catalytic oxidation. Here, we report a H 2 O 2 -assisted synthesis process for trapping Ag + onto the engineered Mn vacancies of δ-MnO 2 for the catalytic oxidation of toluene. Due to the strong MSI between Ag and δ-MnO 2 , the monoatomic Ag + anchored on cation vacancies forms longer and weakened Ag–O bonds compared with Ag 2 O, which can extra promote the formation of oxygen vacancies and the activation of adjacent lattice oxygen in Ag–O–Mn units compared with regular nanoparticle counterparts. It is beneficial to the steps of methyl dehydrogenation, demethylation, and benzene ring cleavage. The catalyst yields excellent toluene oxidation activity, enhanced turnover frequency in terms of Ag, and good stability. Finally, we propose in this study a facile design strategy for fabricating stably atomically dispersed metal sites, as well as clarify the structure–activity relationships during toluene catalytic oxidation, especially the important effect of single-atom Ag on the adjacent local structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energetics of oxidation and formation of uranium mononitride

Uranium mononitride (UN) is an advanced nuclear fuel currently being considered for use in several generation IV fast and thermal neutron spectrum core designs, with additional applications to thermal and electric nuclear propulsion reactors. Here, to better understand the thermal behavior and thermodynamic stability of UN, we investigated the bulk thermal oxidation process and thermochemical reactions, including the enthalpy of oxidation and standard enthalpy of formation, by conducting thermalgravimetric analysis – differential scanning calorimetry coupled with mass spectrometry (TGA-DSC-MS), and high temperature transposed temperature drop and oxide melt drop solution calorimetry. The bulk oxidation of UN (containing a small amount of α-UN 1.5+x ) in air was found to follow a step-wise process characterized by consecutive oxidative reactions UN-UN 1.5+x -UO 2 → UO 2 -UO 3 —N k → UO 3 —N k → UO 3 → U 3 O 8 . TGA results support that the UO 2 – U 2 N 3+x passivating layer delays the onset of rapid bulk oxidation of UN in air up to 662 K. Synchrotron X-ray diffraction (XRD) and extended X-ray absorption fine structure (EXAFS) analyses were performed to characterize UN and its final oxidized product. The standard enthalpy of formation (ΔH° f ) of UN was determined to be –144.4 ± 5.9 kJ/mol·atom, in good agreement with previously determined values from Pt encapsulation and bomb calorimetric experiments. Lastly, a negative linear correlation between ΔH° f and the N/U molar ratio was established based on the thermochemical data obtained in this work and previously reported enthalpies of formations of β-UN 1.5-x and α-UN 1.5+x .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Origin and regulation of oxygen redox instability in high-voltage battery cathodes

Oxygen redox at high-voltage has emerged as a transformative paradigm for high-energy battery cathodes such as layered transition-metal oxides by offering extra capacity beyond conventional transition-metal redox. However, these cathodes suffer from voltage hysteresis, voltage fade, and capacity drop upon cycling; single-crystalline cathodes have recently shown some improvements but these challenges still remain. We reveal the fundamental origin of oxygen redox instability to be originated from the domain boundaries that are present in single-crystalline cathode particles. By synthesizing single-crystalline cathodes free of domain boundaries, we show that the elimination of domain boundaries enhances the reversible lattice oxygen redox while inhibiting the irreversible oxygen release. Further, this leads to significantly suppressed structural degradation and improved mechanical integrity during battery cycling and abuse heating. The robust oxygen redox enabled through domain boundary control provides practical opportunities towards high-energy, long-cycling, and safe batteries.

25 ENERGY STORAGE↗

Tailoring Disordered/Ordered Phases to Revisit the Degradation Mechanism of High‐Voltage LiNi 0.5 Mn 1.5 O 4 Spinel Cathode Materials

Abstract In the spinel oxide cathode family, LiNi 0.5 Mn 1.5 O 4 (LNMO) shows a high operating voltage (≈4.7 V vs Li/Li + ) and excellent Li‐ion mobility with stable 3D conducting channels. Ni/Mn cation disordered and ordered phases usually coexist in LNMO materials, and they have distinct structural and electrochemical properties, resulting in different battery performances for LNMO materials with different phase compositions. Identifying the correlation between phase compositions and electrochemical properties is of significance to the improvement of battery performance and understanding of degradation mechanisms. Herein, the disordered/ordered phase compositions in LNMO materials are tailored by post‐annealing strategies and their impacts on electrochemical performance and degradation mechanisms from the surface to the bulk are systematically investigated. The ordered phase increases rapidly as Mn 3+ is oxidized to Mn 4+ through a post‐annealing process. LNMO with an intermediate fraction of disordered and ordered phases gives rise to improved cycling stability. This article further reports that a high ordered phase fraction can preferentially protect Ni from dissolution during cycling. However, these results suggest that the transition metal dissolution and surface structural change of LNMO do not exhibit a direct correlation with cycling stability. These results indicate the capacity fading mainly correlates with the bulk structural distortion, leading to decreased Li‐ion kinetics.

36 MATERIALS SCIENCE↗

Approaching theoretical specific capacity of iron-rich lithium iron silicate using graphene-incorporation and fluorine-doping

Lithium iron silicate, Li 2 FeSiO 4 , is a promising cathode material for lithium ion batteries due to its high theoretical specific capacity, earth abundance, low cost, and environmental friendliness. The challenges of Li 2 FeSiO 4 as a practical cathode material are (1) the low electronic and ionic conductivity and (2) the low discharge voltage. The approach of incorporating graphene sheets into the nanostructure of Li 2 FeSiO 4 is used for dealing with the low conductivities while fluorine doping is intended to increase the discharge voltage. The fluorine-doped and graphene-incorporated iron-rich lithium iron silicate F-LFSO/G nanomaterials were successfully synthesized using a facile/efficient hydrothermal method with excellent performance, 328.43 mA h g -1 at 0.1C rate, approaching their theoretical specific capacity, 99% of 331 mA h g -1 . This clearly reveals that the reversible (de)lithiation of 2 Li + ions per F-LFSO has been realized as a result of these approaches. The (de)lithiation process has been studied using in operando high energy synchrotron X-ray absorption near edge spectroscopy and X-ray photoelectron spectroscopy aided by theoretical modeling, which reveals that F doping deeply changes the O electron configuration in F-LFSO, and consequently makes the Li + ion transfer easier, while the reversible redox of oxygen can be utilized to achieve high specific capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anomalous X-Ray Scattering and Extended X-Ray Absorption Fine Structure Study of the Local Structure of CrFeCoNiMo x (x = 0.11, 0.18, and 0.23) High-Entropy Alloys

Anomalous x-ray scattering (AXS) and extended x-ray absorption fine structure (EXAFS) were used to determine the local structure of Mo in CrFeCoNiMo x (x = 0.11, 0.18, and 0.23), a high-entropy alloy with a face-centered cubic (FCC) lattice. No superlattice peaks were observed down to the 10 -4 intensity level. This observation along with the nearly constant decrease of the FCC diffraction peaks above the Mo K absorption edge suggests that Mo atoms have no preferred site occupancy in the FCC lattice. Modeling of the EXAFS data suggests a local chemical order in CrFeCoNiMo x , where in Mo-rich samples (e.g., x = 0.23), Mo atoms are preferably surrounded by lighter atoms, such as Cr.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Boosting the activity of non-platinum group metal electrocatalyst for the reduction of oxygen via dual-ligated atomically dispersed precursors immobilized on carbon supports

This paper describes the use of both atomically dispersed precursors (ADPs) and conductive carbon dispersion towards the synthesis of iron-based single atom electrocatalysts for the oxygen reduction reaction (ORR). For non-platinum group metal (non-PGM) catalysts, single iron, cobalt or manganese atoms coordinated with nitrogen are the most active structures towards the ORR. Achieving a high density of active sites made of single atoms is still challenging, requiring careful controls of pyrolysis to reduce the sintering of metal active sites. Herewith, we present a new strategy to synthesize iron-based single atom ORR electrocatalysts using a two pronged approach. We first designed a dual-ligated metal organic framework (MOF) precursor. This MOF was then immobilized onto Ketjen black carbon that serves as a conductive dispersion medium for creating the highly dispersed single atom sites. In this work, we demonstrate a near complete dispersion of the iron sites without obvious formation of nanoparticles. The activity of the resulting electrocatalyst exhibited an onset potential of 0.96 V and a half-wave potential of 0.84 V vs. reversible hydrogen electrode (RHE).

42 ENGINEERING↗

Stone-Wales defect-rich carbon-supported dual-metal single atom sites for Zn-air batteries

In this study, we aim to obtain a fundamental understanding of active sites near stone-wales (SW) defects rich nitrogen-doped graphene (DG) with specific coordination of carbon atom rings. It reveals that the SW rich defects ( e.g., pentagon (5), pentagon—octagon—pentagon ( i.e . 585), or pentagon-heptagon-heptagon-pentagon (5775) rings, appears correspondingly with carbon rings that brought active sites during catalytic reactions. Moreover, we anchored dual isolated metallic atoms (Ni/Fe) on DG support via linkers (O/N) called NiFe-DG. X-ray absorption spectroscopy indicates Ni/Fe metal single atoms are embedded via Fe-N 4 and Ni-N 4 coordination on DG surfaces. It exhibits high catalytic activity for oxygen reduction reaction (ORR) with an onset potential of 0.97 V, a half-wave potential of 0.86 V, and diffusion current density of 5.7 mA cm – 2 , which is at par with commercial Pt/C. The catalyst shows superior stability, retained 82% of the initial current density even after 12 h under an applied potential of 0.86 V. Similarly, the oxygen evolution reaction (OER) overpotential of 358 mV was achieved at 10 mA cm – 2 with a lower Tafel slope value (76 mV/dec) than commercial Pt/C. It maintains 85% stability for 12 h at a constant potential of 1.588 V, shows better stability than commercial Pt/C.

25 ENERGY STORAGE↗

Laser-Irradiated Holey Graphene-Supported Single-Atom Catalyst towards Hydrogen Evolution and Oxygen Reduction

Single-atom catalysts (SAC) can boost the intrinsic catalytic activity of hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR). However, the challenge remains due to the complex synthesis process and insufficient stability. A sustainable approach is applied to synthesizing SACs through laser irradiation and gaining mesoporous graphene oxide (MGO). The surface dangling bonds of nitrogen-doped MGO (NMGO) extract metal atoms species from Co or Fe metal foams and convert them to SAC via an appropriate synthesis approach. Notably, the Co-NMGO electrocatalyst requires low potentials of 146 mV to convey a current density of 10 mA cm -2 towards HER. Similarly, the Fe-NMGO electrocatalyst offers an onset of 0.79 V towards ORR in acidic solution. The individual metal atoms are confirmed via aberration-corrected scanning transmission electron microscopy, and X-ray absorption near-edge structure and extended X-ray absorption fine structure. Density functional theory calculations by applying the grand canonical potential kinetics model revealed that Co-NMGO shows the optimum free reaction energy of -0.17 eV at -0.1 V for HER, and Fe-NMGO has less limiting potential than that of Co-NMGO for ORR case. Furthermore, this work opens a new approach towards the synthesis of SAC and its mechanistic understandings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tailoring the Local Environment of Platinum in Single‐Atom Pt 1 /CeO 2 Catalysts for Robust Low‐Temperature CO Oxidation

Abstract A single‐atom Pt 1 /CeO 2 catalyst formed by atom trapping (AT, 800 °C in air) shows excellent thermal stability but is inactive for CO oxidation at low temperatures owing to over‐stabilization of Pt 2+ in a highly symmetric square‐planar Pt 1 O 4 coordination environment. Reductive activation to form Pt nanoparticles (NPs) results in enhanced activity; however, the NPs are easily oxidized, leading to drastic activity loss. Herein we show that tailoring the local environment of isolated Pt 2+ by thermal‐shock (TS) synthesis leads to a highly active and thermally stable Pt 1 /CeO 2 catalyst. Ultrafast shockwaves (>1200 °C) in an inert atmosphere induced surface reconstruction of CeO 2 to generate Pt single atoms in an asymmetric Pt 1 O 4 configuration. Owing to this unique coordination, Pt 1 δ+ in a partially reduced state dynamically evolves during CO oxidation, resulting in exceptional low‐temperature performance. CO oxidation reactivity on the Pt 1 /CeO 2 _TS catalyst was retained under oxidizing conditions.

Jiang, Dong↗

Tailoring the Local Environment of Platinum in Single-Atom Pt 1 /CeO 2 Catalysts for Robust Low-Temperature CO Oxidation

A single-atom Pt 1 /CeO 2 catalyst formed by atom trapping (AT, 800 degrees C in air) shows excellent thermal stability but is inactive for CO oxidation at low temperatures owing to over-stabilization of Pt 2+ in a highly symmetric square-planar Pt 1 O 4 coordination environment. Reductive activation to form Pt nanoparticles (NPs) results in enhanced activity; however, the NPs are easily oxidized, leading to drastic activity loss. In this work, we show that tailoring the local environment of isolated Pt 2+ by thermal-shock (TS) synthesis leads to a highly active and thermally stable Pt 1 /CeO 2 catalyst. Ultrafast shockwaves (>1200 degrees C) in an inert atmosphere induced surface reconstruction of CeO 2 to generate Pt single atoms in an asymmetric Pt 1 O 4 configuration. Owing to this unique coordination, Pt 1 δ+ in a partially reduced state dynamically evolves during CO oxidation, resulting in exceptional low-temperature performance. CO oxidation reactivity on the Pt 1 /CeO 2 _TS catalyst was retained under oxidizing conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗