Search NASA⌕ Search

Engineering topics

Surampudi, S.

Publications and source records attributed to Surampudi, S..

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Commercialization of a Direct Methanol Fuel Cell System

This paper describes a major breakthrough in energy technology developed at the Jet Propulsion Laboratory that can be used in a wide variety of portable, remote, and transportation applications without polluting the environment. The status, performance, and design considerations of the JPL non-polluting, direct methanol, fuel cell system for consumer equipment and transportation applications are reported herein. This new fuel cell technology utilizes the direct oxidation of a 3 percent aqueous liquid methanol solution as the fuel and air (O&sub2;) as the oxidant. The only products are CO&sub2; and water. Therefore, because recharging can be accomplished by refueling with methanol, vehicles can enjoy unlimited range and extended use compared to battery operated devices requiring recharging time and power accessibility.

fuel↗
NASA NTRS1996

Status of JPL Li-Ion Cell Development Program

None given. This is a series of viewgraphs from a visual presentation to the workshop. From outline: JPL program overview; low temperature studies; cycle life studies; destructive physical analysis (DPA) of cycled cells; prototype cell development; summary of accomplishment.

JPL LI-Ion Program low temperature studies cycle l↗
NASA NTRS1996

Mars Pathfinder Battery Program Status

Sections of this discussion include: a mission overview of the Mars Pathfinder Project; battery requirements; Ag-Zn technology assessment; EM battery performance; and summary and conclusions.

Surampudi, S.↗
NASA NTRS1996

Lithium-Ion Battery Program Status

The objective of this program is to develop rechargeable Li-ion cells for future NASA missions. Applications that would benefit from this project are: new millenium spacecraft; rovers; landers; astronaut equipment; and planetary orbiters. The approach of this program is: select electrode materials and electrolytes; identify failure modes and mechanisms and enhance cycle life; demonstrate Li-ion cell technology with liquid electrolyte; select candidate polymer electrolytes for Li-ion polymer cells; and develop Li-ion polymer cell technology.

Surampudi, S.↗
NASA NTRS1996

Low Crossover Polymer Electrolyte Membranes for Direct Methanol Fuel Cells

Direct Methanol Fuel Cells (DMFC's) using polymer electrolyte membranes are promising power sources for portable and vehicular applications. State of the art technology using Nafion(R) 117 membranes (Dupont) are limited by high methanol permeability and cost, resulting in reduced fuel cell efficiencies and impractical commercialization. Therefore, much research in the fuel cell field is focused on the preparation and testing of low crossover and cost efficient polymer electrolyte membranes. The University of Southern California in cooperation with the Jet Propulsion Laboratory is focused on development of such materials. Interpenetrating polymer networks are an effective method used to blend polymer systems without forming chemical links. They provide the ability to modify physical and chemical properties of polymers by optimizing blend compositions. We have developed a novel interpenetrating polymer network based on poly (vinyl - difluoride)/cross-linked polystyrenesulfonic acid polymer composites (PVDF PSSA). Sulfonation of polystyrene accounts for protonic conductivity while the non-polar, PVDF backbone provides structural integrity in addition to methanol rejection. Precursor materials were prepared and analyzed to characterize membrane crystallinity, stability and degree of interpenetration. USC JPL PVDF-PSSA membranes were also characterized to determine methanol permeability, protonic conductivity and sulfur distribution. Membranes were fabricated into membrane electrode assemblies (MEA) and tested for single cell performance. Tests include cell performance over a wide range of temperatures (20 C - 90 C) and cathode conditions (ambient Air/O2). Methanol crossover values are measured in situ using an in-line CO2 analyzer.

Prakash, G. K. Surya↗
NASA NTRS1995

New Anode Material for Rechargeable Li-ION Cells

Carbon materials, such as graphite, cokes, pitch and PAN fibers, are being evaluated in lithium batteries as alternate anode materials with some degree of success. There is an effort to look for other non-carbon anode materials which have larger Li capacity, higher rate capability, smaller first charge capacity loss and better mechanical stability during cycling. A Li-Mg-Si material is evaluated.

rechargeable batteries anode materials Li-ION cell↗
NASA NTRS1995

Parametric Design Studies on a Direct Liquid Feed Fuel Cell

Parametric design studies were carried out on a direct methanol liquid feed fuel cell employing 1 M MeOH fuel, air and oxygen as oxidant in a 2 inch x 2 inch cell employing polymeric electrolyte membranes. Measurements include voltage-current output parameters, methanol crossover rate, and impedance as a function of several design and operational variables. Design variables are described.

Fuel Cell Advanced Research Projects Agency↗
NASA NTRS1994

(abstract) Studies on AB(sub 5) Metal Hydride Alloys with Sn Additives

The use of metal hydrides as negative electrodes in alkaline rechargeable cells is becoming increasingly popular, due to several advantages offered by the metal hydrides over conventional anode materials (such as Zn, Cd) in terms of specific energy environmental cycle life and compatibility. Besides, the similarities in the cell voltage pressure characteristics, and charge control methods of the Ni-MH cells to the commonly used Ni-Cd point to a projected take over of 25% of the Ni-Cd market for consumer electronics by the Ni-MH cells in the next couple of years. Two classes of metal hydrides alloys based on rare earth metals (AB(sub 5)) and titanium (AB(sub 2)) are being currently developed at various laboratories. AB(sub 2) alloys exhibit higher specific energy than the AB(sub 5) alloys but the state of the art commercial Ni-MH cells are predominately manufactured using AB(sub 5) alloys.

earth metals↗
NASA NTRS1994

Development of Ambient Temperature Lithium-Ion Cells

Four types of materials have been evaluated as anodes for Li-ion cell fabrication. Among the materials evaluated, graphite and magnasium silicide were identified to be suitable candidate anode materials.

Li alloys Lithium-Ion↗
NASA NTRS1994

Performance Characteristics of Lithium Ion Polymeric Electrolyte Cells

A series of polyacrylonitrile-based (PAN) electrolytes containing LiAsF6 and a number of solvent mixtures including ethylene carbonate (EC) + propylene carbonate (PC) were prepared, electrochemically evaluated and used as electrolyte in the polymer cells.

polyacrylonitrile-based electrolytes ethylene carb↗
NASA NTRS1994

Electrochemical Studies on AB5 Metal Hydrides

The ability of certain intermetallic alloys to reversibly absorb significant amounts of hydrogen at low pressures and high potentials is being exploited for several applications.

metal hydrides intermetallic alloys electric vehic↗
NASA NTRS1994

Development of Carbon Anode for Rechargeable Lithium Cells

Conventionally, rechargeable lithium cells employ a pure lithium anode. To overcome problems associated with the pure lithium electrode, it has been proposed to replace the conventional electrode with an alternative material having a greater stability with respect to the cell electrolytes. For this reason, several graphitic and coke based carbonaceous materials were evaluated as candidate anode materials...In this paper, we summarize the results of the studies on Li-ion cell development.

rechargeable batteries batteries lithium cells lit↗