Search NASA⌕ Search

Engineering topics

Tapriyal, Deepak

Publications and source records attributed to Tapriyal, Deepak.

32 records · Page 2

Measurements and modeling of high-temperature, high-pressure density for binary mixtures of propane with n-decane and propane with n-eicosane

Binary mixture density data are reported for propane (C 3 ) with n-decane (C 10 ) and with n-eicosane (C 20 ) at T = (320 to 525) K and pressures to 265 MPa. The (C 3 + C 10 ) mixture density data are in good agreement with available literature data to 70 MPa, which is the maximum reported literature pressure. We found that there are no available binary mixture density data to compare to the (C 3 + C 20 ) mixture density data reported in the present study. Furthermore, the mixture density data are correlated with the Tait equation to facilitate interpolation of the data at different experimental conditions. Equations of state that are suitable for reservoir simulations are used to model the reported data. These models include the Peng–Robinson equation of state (PREoS), a volume-translated PREoS fit to high temperature, high pressure (HTHP) pure component density data, the PC-SAFT EoS, and modifications of the PC-SAFT EoS developed for better representation of HTHP data. As a result, the models give superior density predictions for (C 3 + C 10 ) mixtures compared to (C 3 + C 20 ) mixtures.

02 PETROLEUM↗

High Temperature, High Pressure Equation of State: Solidification of Hydrocarbons and Measurement of Krytox Oil Using Rolling-Ball Viscometer Validation

The global consumption of oil and gas continues to rise and has led to the search and recovery of petroleum sources from reservoirs exhibiting increasingly high-temperature, high-pressure conditions. For example, ultra-deep petroleum formations found at depths of approximately 5 km or more, can exhibit pressure and temperature values as high as 240 MPa (35,000 psi) and 533 K (260°C). The hydrocarbons produced from these ultra-deep formations experience significant decreases in temperature and pressure from reservoir to platform conditions. Hence, it is highly desirable to develop accurate equation of state models (EOS) and fluid properties databases that covers the entire temperature and pressure ranges associated with this process to promote the efficient, safe, and environmentally responsible production from these reservoirs at extreme conditions. Currently available databases and EOS models are generally limited to approximately 69 MPa and do not correlate accurately when extrapolated to the extreme environments associated with ultra-deep reservoirs where temperatures can reach as high as 533 K and pressures up to 240 MPa. Despite recent exploration and production of petroleum from ultra-deep formations, there are major gaps in the databases for pure and mixture density and viscosity of hydrocarbons. These are the most important fluid properties that enable accurate booking of reserves as well as the design of size and equipment to safely bring these fluids to the platform. The overall objective of this project is to develop methodologies to provide crude oil thermodynamic and transport properties—including density, viscosity, and phase composition— at extreme temperature and pressure conditions. The knowledge of these crude oil properties reduces uncertainties associated with deep drilling and promotes safer and reliable access to domestic energy resources. This report is an extension of work reported in our first Technical Report Series (TRS) released July 31, 2012: High Temperature, High Pressure Equation of State Density Correlations and Viscosity Correlations (Tapriyal et al., 2012). New experimental data were obtained by utilizing density cell and rolling-ball viscometer (both designed by our team) rated up to 533 K and 275 MPa. This report focuses on the solidification of hydrocarbons at elevated temperatures and pressures and

02 PETROLEUM↗

Volume-translated cubic EoS and PC-SAFT density models and a free volume-based viscosity model for hydrocarbons at extreme temperature and pressure conditions

This research focuses on providing the petroleum reservoir engineering community with robust models of hydrocarbon density and viscosity at the extreme temperature and pressure conditions (up to 533 K and 276 MPa, respectively) characteristic of ultra-deep reservoirs, such as those associated with the deepwater wells in the Gulf of Mexico. Our strategy is to base the volume-translated (VT) Peng–Robinson (PR) and Soave–Redlich–Kwong (SRK) cubic equations of state (EoSs) and perturbed-chain, statistical associating fluid theory (PC-SAFT) on an extensive data base of high temperature (278–533 K), high pressure (6.9–276 MPa) density rather than fitting the models to low pressure saturated liquid density data. This high-temperature, high-pressure (HTHP) data base consists of literature data for hydrocarbons ranging from methane to C{sub 40}. The three new models developed in this work, HTHP VT-PR EoS, HTHP VT-SRK EoS, and hybrid PC-SAFT, yield mean absolute percent deviation values (MAPD) for HTHP hydrocarbon density of ~2.0%, ~1.5%, and <1.0%, respectively. An effort was also made to provide accurate hydrocarbon viscosity models based on literature data. Viscosity values are estimated with the frictional theory (f-theory) and free volume (FV) theory of viscosity. The best results were obtained when the PC-SAFT equation was used to obtain both the attractive and repulsive pressure inputs to f-theory, and the density input to FV theory. Both viscosity models provide accurate results at pressures to 100 MPa but experimental and model results can deviate by more than 25% at pressures above 200 MPa.

02 PETROLEUM↗

Exploratory characterization of a perfluoropolyether oil as a possible viscosity standard at deepwater production conditions of 533 K and 241 MPa

DuPont’s perfluoropolyether oil Krytox ® GPL 102 is a promising candidate for the high-temperature, high-pressure Deepwater viscosity standard (DVS). The preferred DVS is a thermally stable liquid that exhibits a viscosity of roughly 20 mPa ∙ s at 533 K and 241 MPa; a viscosity value representative of light oils found in ultra-deep formations beneath the deep waters of the Gulf of Mexico. Furthermore, a windowed rolling-ball viscometer designed by our team is used to determine the Krytox ® GPL 102 viscosity at pressures to 245 MPa and temperatures of 311 K, 372 K, and 533 K. At 533 K and 243 MPa, the Krytox ® GPL 102 viscosity is (27.2±1.3)mPa ∙ s. The rolling-ball viscometer viscosity results for Krytox ® GPL 102 are correlated with an empirical 10-parameter surface fitting function that yields an MAPD of 3.9 %. A Couette rheometer is also used to measure the Krytox ® GPL 102 viscosity, yielding a value of (26.2±1)mPa ∙ s at 533 K and 241 MPa. The results of our exploratory study suggest that Krytox ® GPL 102 is a promising candidate for the DVS, primarily because this fluoroether oil is thermally stable and exhibits a viscosity closer to the targeted value of 20 mPa ∙ s at 533 K and 241 MPa than any other fluid reported to date. Nonetheless, further studies must be conducted by other researcher groups using various types of viscometers and rheometers on samples of Krytox GPL ® 102 from the same lot to further establish the properties of Krytox GPL ® 102.

Couette rheometer↗

Effect of Isomeric Structures of Branched Cyclic Hydrocarbons on Densities and Equation of State Predictions at Elevated Temperatures and Pressures

The cis and trans conformation of a branched cyclic hydrocarbon affects the packing and, hence, the density, exhibited by that compound. Reported here are density data for branched cyclohexane (C6) compounds including methylcyclohexane, ethylcyclohexane (ethylcC6), cis-1,2-dimethylcyclohexane (cis-1,2), cis-1,4-dimethylcyclohexane (cis-1,4), and trans-1,4-dimethylcyclohexane (trans-1,4) determined at temperatures up to 525 K and pressures up to 275 MPa. Of the four branched C6 isomers, cis-1,2 exhibits the largest densities and the smallest densities are exhibited by trans-1,4. The densities are modeled with the Peng–Robinson (PR) equation of state (EoS), the high-temperature, high-pressure, volume-translated (HTHP VT) PREoS, and the perturbed chain, statistical associating fluid theory (PC-SAFT) EoS. Model calculations highlight the capability of these equations to account for the different densities observed for the four isomers investigated in this study. The HTHP VT-PREoS provides modest improvements over the PREoS, but neither cubic EoS is capable of accounting for the effect of isomer structural differences on the observed densities. The PC-SAFT EoS, with pure component parameters from the literature or from a group contribution method, provides improved density predictions relative to those obtained with the PREoS or HTHP VT-PREoS. However, the PC-SAFT EoS, with either set of parameters, also cannot fully account for the effect of the C6 isomer structure on the resultant density.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO2 Capture Using Phase-Changing Sorbents

A novel method for the postcombustion capture of CO2 from coal-fired power plants has been described utilizing an aminosilicone absorbent. 1,3-Bis(3-aminopropy1)-1,1,3,3-tetramethyldsiloxane (GAP-0) rapidly transforms from a low viscosity liquid to a friable solid upon exposure to CO2 in simulated flue gas. This material has excellent thermal stability, low vapor pressure, high CO2 loading capability, and a large dynamic CO2 capacity between rich and lean solvent loadings. Preliminary plant and process models assembled from experimental data show a decrease in parasitic energy loss from 30% to 18% when compared to the benchmark monoethanolamine (MEA) process and a concomitant lowering of the cost of electricity (COE) from 74% to 44% increase versus a plant without carbon capture.

Perry, RJ↗

Experimental measurements and equation of state modeling of liquid densities for long-chain n-alkanes at pressures to 265 MPa and temperatures to 523 K

Experimental densities are reported for n-hexadecane, n-octadecane, and n-eicosane at pressures to ~265 MPa and temperatures of 323.15, 423.15, and 523.15 K. The reported densities are in good agreement with the available literature data that cover limited pressure and temperature ranges. The Peng–Robinson equation of state (PR EOS), a new high-temperature high-pressure volume-translated Soave–Redlich–Kwong equation of state (HTHP-VT SRK EOS), and the perturbed-chain statistical associating fluid theory (PC-SAFT) are used to predict the reported densities. Finally, both the HTHP-VT SRK and PC-SAFT equations exhibit mean absolute percent deviation (MAPD) values of 2.4–1.3% for the densities of all three hydrocarbons while the MAPD values for the PR EOS are all near 16%.

Density↗