Engineering topics
Teng, Fei
Publications and source records attributed to Teng, Fei.
Open associahedra and scattering forms
We continue the study of open associahedra associated with bi-color scattering amplitudes initiated in ref. [1]. We focus on the facet geometries of the open associahedra, uncovering many new phenomena such as fiber-product geometries. We then provide novel recursion procedures for calculating the canonical form of open associahedra, generalizing recursion relations for bounded polytopes to unbounded polytopes.
Investigation of the microstructure evolution of alpha uranium after in pile transient
Not Available
α-U and ω-UZr 2 in neutron irradiated U-10Zr annular metallic fuel
Here, to develop metallic fuel with ultra-high burnup of 30%-40%, an annular U-10Zr fuel with 55% smear density was fabricated through a casting route and irradiated at the Advanced Test Reactor at Idaho National Laboratory. The annular fuel design also serves as a demonstration of the feasibility to replace sodium bond with a helium bond to benefit the geological disposal of irradiated fuel, cut the cost of fuel fabrication, and boost the overall metallic fuel economy. This paper reports the results from transmission electron microscopy (TEM) based post-irradiation examination of this fuel type irradiated to a burnup of 3.3% fissions per initial heave metal atoms for initial screening purpose. After irradiation, the initial U-10Zr separated into an a-U annular region and an UZr 2+x center region with nanoscale spinodal decomposed microstructure. Because of the provided large amount of coherent interface areas, the fission gas atoms and vacancies generated in UZr 2+x phase are possibly pinned at the interface areas, leading to 20 times smaller fission gas bubbles than those in the neighboring a-U. The large bubbles in a-U become connected and merged into large pores that provide fast release paths for fission gas which prevents further fuel swelling. The fuel center still has open space to accommodate further fuel swelling from solid fission products at higher burnup. Other neutron irradiation induced phase and microstructure change are also characterized and compared with traditional solid fuel designs.
On positive geometry and scattering forms for matter particles
We initiate the study of positive geometry and scattering forms for tree-level amplitudes with matter particles in the (anti-)fundamental representation of the color/flavor group. As a toy example, we study the bi-color scalar theory, which supplements the bi-adjoint theory with scalars in the (anti-)fundamental representations of both groups. Using a recursive construction we obtain a class of unbounded polytopes called open associahedra (or associahedra with certain facets at infinity) whose canonical form computes amplitudes in bi-color theory, for arbitrary number of legs and flavor assignments. In addition, we discuss the duality between color factors and wedge products, or "color is kinematics", for amplitudes with matter particles as well.
Effect of microwave sterilization on maturation time and quality of low‐salt sufu
Abstract The objective of this study was to reduce the microorganism number and salt content in pehtze by microwave sterilization. The maturation time and quality of low‐salt sufu were evaluated. The microorganism inactivation rate, moisture content and water activity of the pehtze, which was used for the growth of the starter culture, showed that 4,250 W for 30 s was suitable for the preparation of low‐salt sufu. With regard to the physicochemical properties of sufu, 120‐day sufu samples obtained by traditional high‐salt (14%) fermentation and 75‐day sufu samples obtained by low‐salt (4%) fermentation met the standard requirements. With regard to the sensory characteristics of sufu, the taste and after taste scores of 75‐day low‐salt sufu samples were significantly higher than those of 120‐day high‐salt sufu samples ( p < .05).The overall acceptance score of low‐salt sufu samples also was higher than that of high‐salt sufu samples. The contents of free amino acids and the profiles of typical flavor compounds partly explained the sensory quality and shorter ripening time of sufu manufactured. The total biogenic amine contents were reduced by 46%.
China’s Non-CO 2 Greenhouse Gas Emissions: Future Trajectories and Mitigation Options and Potential
Forecasts indicate that China's non-carbon dioxide (CO 2 ) greenhouse gas (GHG) emissions will increase rapidly from the 2014 baseline of 2 billion metric tons of CO 2 equivalent (CO 2 e). Previous studies of the potential for mitigating non-CO 2 GHG emissions in China have focused on timeframes through only 2030, or only on certain sectors or gases. This study uses a novel bottom-up end-use model to estimate mitigation of China's non-CO 2 GHGs under a Mitigation Scenario whereby today's cost-effective and technologically feasible CO 2 and non-CO 2 mitigation measures are deployed through 2050. The study determines that future non-CO 2 GHG emissions are driven largely by industrial and agricultural sources and that China could reduce those emissions by 47% by 2050 while enabling total GHG emissions to peak by 2023. Except for F-gas mitigation, few national or sectoral policies have focused on reducing non-CO 2 GHGs. Policy, market, and other institutional support are needed to realize the cost-effective mitigation potentials identified in this study.
Irradiation damage and IASCC of printed 316L for use as fuel cladding
Additive manufacturing is an area of increasing interest to the nuclear industry. It offers a number of benefits over traditional manufacturing methods, such as the ability to create complex geometries without the need for welds. In addition to the potential for creating nuclear structural components, additive manufacturing may be used to create novel fuel/cladding designs. However, printed steel behaves differently than traditional wrought material. A number of industries are already studying the effects of the printed microstructures on mechanical properties. For cladding material and some structural nuclear components, however, the nuclear industry must also understand the material response to irradiation. This work examines the irradiation damage and the irradiation assisted stress corrosion cracking behavior of both proton irradiated (1 and 5 dpa) printed 316L steel and wrought 316L steel that were irradiated side by side at the Michigan Ion Beam Laboratory. As orientation with respect to the build direction can affect the mechanical properties of printed metal, specimens were taken from multiple orientations within the printed steel. For the IASCC testing, specimens were strained to 4% in simulated BWR NWC water (288°C, 0.2 µS/cm). TEM, SEM and X-ray microCT were used to examine coupons of the material as well as tensile bars used in the IASCC testing. This paper will show the key findings from this work, namely the IASCC response of printed metal (as compared to wrought), as well as the effects of the printed microstructure (such as the pre-existing voids) on the irradiation damage.
FPR1 gene silencing suppresses cardiomyocyte apoptosis and ventricular remodeling in rats with ischemia/reperfusion injury through the inhibition of MAPK signaling pathway
Ischemia/reperfusion (I/R) injury, one of the leading health problems in the world, is defined as a cause of cardiomyocytes death. In the present study, we investigate the role of formyl peptide receptor 1 (FPR1) in cardiomyocyte apoptosis and ventricular remodeling of I/R injury rats and the underlying mechanism involving mitogen-activated protein kinase (MAPK) signaling pathway. The important differentially expressed genes (DEGs) in I/R injury were screened out and downstream pathways affected by DEGs were predicted. We grouped 90 rats into sham, I/R, NC siRNA, FRP1 siRNA, empty vector, and FRP1 vector groups and established a model of I/R injury in rats. CVF value, myocardial infarct areas and positive expression rate of FPR1 and MAPK were detected. Levels of FPR1 and MAPK pathway-related genes were determined by RT-qPCR and western blot analysis. MTT assay was performed to evaluate cell proliferation and flow cytometry to evaluate cell cycle progression and apoptosis. GSE19804 and GSE27262 were screened from Gene Expression Omnibus database. FPR1 was higher in patients with I/R injury and activate the MAPK signaling pathway. FRP1 gene silencing decreased CVF value, infarct area, apoptotic index, positive expression rates of FPR1 and MAPK, decreased FPR1, p38, ERK, JNK, MMP-2, TIMP-2, NF-kB, Bax, p-p38, p-ERK, and p-JNK levels, increased Bcl-2 level, promoted cell proliferation and cell cycle progression, and inhibited cell apoptosis rate. Overall, our study demonstrates that the silencing of FPR1 gene depresses inflammation, cardiomyocyte apoptosis and ventricular remodeling in rats with I/R injury through the suppressing the activation of the MAPK signaling pathway.
Prospects for detecting a net photon circular polarization produced by decaying dark matter
If dark matter interactions with Standard Model particles are CP-violating, then dark matter annihilation/decay can produce photons with a net circular polarization. We consider the prospects for experimentally detecting evidence for such a circular polarization. We identify optimal models for dark matter interactions with the Standard Model, from the point of view of detectability of the net polarization, for the case of either symmetric or asymmetric dark matter. Furthermore, we find that, for symmetric dark matter, evidence for net polarization could be found by a search of the Galactic Center by an instrument sensitive to circular polarization with an efficiency-weighted exposure of at least 50000 cm 2 yr, provided the systematic detector uncertainties are constrained at the 1% level. Better sensitivity can be obtained in the case of asymmetric dark matter. We report on the prospects for achieving the needed level of performance using possible detector technologies.
Enhanced photosensitized degradation of rhodamine B on CdS/TiO{sub 2} nanocomposites under visible light irradiation
Graphical abstract: The photosensitized degradation of RhB was largely enhanced by the synergistic effect of the RhB and CdS/TiO{sub 2} nanocomposite. The composite of the two inorganic semiconductors with appropriate oxidation reduction energy levels enhanced the charge separation and extended the absorption response to visible region. - Highlights: • CdS/TiO{sub 2} nanocomposites were synthesized by a simple hydrothermal method. • Samples prepared at 200 °C, 12 h, CdS/TiO{sub 2} = 12% possessed the best activity. • The photosensitized degradation of RhB was largely enhanced by the composite. • The better activity was due to the synergistic effect of the RhB and CdS/TiO{sub 2}. - Abstract: Visible-light-driven photocatalysts, CdS/TiO{sub 2} nanocomposites were synthesized by a simple hydrothermal method. Their formation and structures were characterized by X-ray diffractometer, transmission electron microscopy, diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy. Taking rhodamine B (RhB) as a model, their photocatalytic activities in aqueous phase under visible light irradiation (420 < λ < 800 nm) were tested. The results showed that the composite of CdS and TiO{sub 2} with appropriate oxidation reduction energy levels enhanced the charge separation and extended the absorption response into visible light region. Thus, the photosensitized degradation of RhB was largely enhanced. The degradation mechanism was explored concretely.