Search NASA⌕ Search

Engineering topics

Wagner, Gregory L.

Publications and source records attributed to Wagner, Gregory L..

Development of Anti- Yersinia pestis Human Antibodies with Features Required for Diagnostic and Therapeutic Applications

Yersinia pestis is a category A infective agent that causes bubonic, septicemic, and pneumonic plague. Notably, the acquisition of antimicrobial or multidrug resistance through natural or purposed means qualifies Y. pestis as a potential biothreat agent. Therefore, high-quality antibodies designed for accurate and sensitive Y. pestis diagnostics, and therapeutics potentiating or replacing traditional antibiotics are of utmost need for national security and public health preparedness. Here, we describe a set of human monoclonal immunoglobulins (IgG1s) targeting Y. pestis fraction 1 (F1) antigen, previously derived from in vitro evolution of a phage-display library of single-chain antibodies (scFv). We extensively characterized these antibodies and their effect on bacterial and mammalian cells via: ELISA, flow cytometry, mass spectrometry, spectroscopy, and various metabolic assays. Two of our anti-F1 IgG (αF1Ig 2 and αF1Ig 8) stood out for high production yield, specificity, and stability. These two antibodies were additionally attractive in that they displayed picomolar affinity, did not compete when binding Y. pestis, and retained immunoreactivity upon chemical derivatization. Most importantly, these antibodies detected < 1,000 Y. pestis cells in sandwich ELISA, did not harm respiratory epithelial cells, induced Y. pestis agglutination at low concentration (350 nM), and caused apparent reduction in cell growth when radiolabeled at a nonagglutinating concentration (34 nM). These antibodies are amenable to the development of accurate and sensitive diagnostics and immuno/radioimmunotherapeutics.

60 APPLIED LIFE SCIENCES↗

Hydration of α-UO 3 following storage under controlled conditions of temperature and relative humidity

Changes in chemical speciation of uranium oxides following storage under varied conditions of temperature and relative humidity are valuable for characterizing material provenance. In this study, subsamples of high purity α-UO 3 were stored under four sets of controlled conditions of temperature and relative humidity over several years, and then measured periodically for chemical speciation. Powder X-ray diffraction (XRD) analysis and extended X-ray absorption fine structure spectroscopy confirm hydration of α-UO 3 to a schoepite-like end product following storage under each of the varied storage conditions, but the species formed during exposure to the lower relative humidity and lower temperature condition follows different trends from those formed under the other three storage conditions (high relative humidity with high or low temperatures, and low relative humidity with a high temperature). Thermogravimetry coupled with XRD analysis was carried out to distinguish desorption pathways of water from the hydrated end products. Density functional theory calculations discern changes in the structure of α-UO 3 following incorporation of 1, 2 or 3 H 2 O molecules or 1, 2 or 3 OH groups into the orthorhombic lattice, revealing differences in lattice constants, U–O bond lengths, and U–U distances. The collective results from this analysis are in contrast to analogous studies that report that U 3 O 8 is oxidized and hydrated in air during storage under high relative humidity conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oil and gas produced water as a growth medium for microalgae cultivation: A review and feasibility analysis

Scale-up of microalgal biotechnology to provide large quantities of biofuel, lipids, and coproducts is not fully developed because of the large needs for nutrients, water, land, solar insolation, and CO 2 /carbon supplies. Wastewaters, including oil and gas produced water (PW), may supply a portion of these needs in regions with insufficient fresh water resources. PW is a challenging water resource for this use because of variable salinity, geochemical complexity, and the presence of biologically toxic components. In this paper we review PW volumes, quality, and use in media for microalgae production in the southwestern US, Australia, and Oman. We also include data from the southwestern US, referencing previously unpublished results from the National Alliance for Biofuels and Bioproducts (NAABB) consortium research project. We include a Supplementary Information section that explores cultivation of multiple microalgae species in PW and examines the carbon utilization process, all work performed in support of the NAABB field program. Strains of algae tested in the reviewed papers include Nannochloropsis , Dunalliella , Scenedesmus , and several mixed or unknown cultures. We conclude that the use of PW in algae cultivation is feasible, if the additional complexity of the water resource is accounted for in developing media formulations and in understanding metals uptake by the algae. We recommend additional work to standardize growth testing in PW, better and more thorough chemical analysis, and geochemical modeling of the PW used in media. As a result, expanded strain testing in PW media will identify improved strains tolerant of PW in algae cultivation.

59 BASIC BIOLOGICAL SCIENCES↗

Morphology of U 3 O 8 materials following storage under controlled conditions of temperature and relative humidity

Changes in the visual characteristics of uranium oxide surfaces and morphology following storage under different conditions of temperature and relative humidity may provide insight into the history of an unknown sample. Sub-samples of three α-U 3 O 8 materials—one that was phase-pure and two that were phase-impure—were stored under controlled conditions for two years. We used scanning electron microscopy to image the oxides before and after storage, and a morphology lexicon was used to characterize the images. Finally, temporal changes in morphology were observed in some sub-samples, and changes were greatest following exposure to high relative humidity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Morphologic and chemical characterization of products from hydrolysis of UF 6

Characterization of the chemical speciation and morphologies of products formed from hydrolysis of uranium hexafluoride (UF 6 ) is important for predicting dispersion and contamination of released material, or health consequences from inhalation of air-borne particles. Here, we report products of hydrolysis of UF 6 in which the quantity of water was insufficient for complete formation of UO 2 F 2 . Material was deposited onto carbon tape and aluminum. Scanning electron microscopy was employed to characterize textures and particle sizes, and powder X-ray diffraction analysis and μ-Fourier transform infrared absorption spectroscopy were used to characterize chemical speciation. These results revealed that the ratio of H 2 O to UF 6 , depository substrate composition, and storage conditions must be considered when evaluating chemical speciation, morphologic texture and particles size of UF 6 hydrolysis products. LA-UR-15-23846.

36 MATERIALS SCIENCE↗

Oxidation and Hydration of U 3 O 8 Materials Following Controlled Exposure to Temperature and Humidity

Chemical signatures correlated with uranium oxide processing are of interest to forensic science for inferring sample provenance. Identification of temporal changes in chemical structures of process uranium materials as a function of controlled temperatures and relative humidities may provide additional information regarding sample history. In our study, a high-purity α-U 3 O 8 sample and three other uranium oxide samples synthesized from reaction routes used in nuclear conversion processes were stored under controlled conditions over 2–3.5 years, and powder X-ray diffraction analysis and X-ray absorption spectroscopy were employed to characterize chemical speciation. We measured signatures from the α-U 3 O 8 sample indicated that the material oxidized and hydrated after storage under high humidity conditions over time. Impurities, such as uranyl fluoride or schoepites, were initially detectable in the other uranium oxide samples. After storage under controlled conditions, the analyses of the samples revealed oxidation over time, although the signature of the uranyl fluoride impurity diminished. The presence of schoepite phases in older uranium oxide material is likely indicative of storage under high humidity and should be taken into account for assessing sample history. Finally, the absence of a signature from a chemical impurity, such as uranyl fluoride hydrate, in an older material may not preclude its presence at the initial time of production.

36 MATERIALS SCIENCE↗

Covalency in Metal-Oxygen Multiple Bonds Evaluated Using Oxygen K-edge Spectroscopy and Electronic Structure Theory

Advancing theories of how metal oxygen bonding influences metal oxo properties can expose new avenues for innovation in materials science, catalysis, and biochemistry. Historically, spectroscopic analyses of the transition metal peroxyanions, MO4x-, have formed the basis for new M O bonding theories. Herein, relative changes in M O orbital mixing in MO42- (M = Cr, Mo, W) and MO41- (M = Mn, Tc, Re) are evaluated for the first time by non-resonant inelastic X-ray scattering, X-ray absorption spectroscopy using fluorescence and transmission (via a scanning transmission X-ray microscope), and linear-response density functional theory. The results suggest that moving from Group 6 to Group 7 or down the triads increases M O e () mixing. Meanwhile, t2 mixing ( + ) remains relatively constant within the same Group. These unexpected changes in frontier orbital energy and composition are evaluated in terms of periodic trends in d orbital energy and radial extension.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Covalency in Metal-Oxygen Multiple Bonds Evaluated Using Oxygen K-edge Spectroscopy and Electronic Structure Theory

Advancing theories of how metal–oxygen bonding influences metal oxo properties can expose new avenues for innovation in materials science, catalysis, and biochemistry. Historically, spectroscopic analyses of the transition metal MO 4 x– anions have formed the basis for new M–O bonding theories. Herein, relative changes in M–O orbital mixing in MO 4 2– (M = Cr, Mo, W) and MO 4 – (M = Mn, Tc, Re) are evaluated for the first time by nonresonant inelastic X-ray scattering, X-ray absorption spectroscopy using fluorescence and transmission (via a scanning transmission X-ray microscope), and time-dependent density functional theory. The results suggest that moving from Group 6 to Group 7 or down the triads increases M–O e* (π*) mixing; for example, it more than doubles in ReO 4 – relative to CrO 4 2– . Mixing in the t2* orbitals (σ* + π*) remains relatively constant within the same Group, but increases on moving from Group 6 to Group 7. These unexpected changes in orbital energy and composition for formally isoelectronic tetraoxometalates are evaluated in terms of periodic trends in d orbital energy and radial extension.

Minasian, Stefan G↗

Cameco UO 3 Materials Analysis

Uranium trioxide (UO 3 ) was characterized using a variety of techniques to better understand its physical properties. Scanning electron microscope (SEM) images were collected to examine particle morphology, which consisted of semi-spherical particles that tended to agglomerate before sonication. Particle size analysis revealed a singular mode distribution with a mean particle size of 43.0 {micro}m. After sonication a bimodal distribution was produced with peak particle sizes at 0.226 μm and 9.43 μm. The O/U ratio was measured to be 3.09 by Cameco in 2009, by gravimetric analysis. X-ray diffraction (XRD) showed that the sample was mostly Υ-UO 3 (87.1%) with a small amount of UO 3 ̣ 0.80 H 2 O (12.9%). Bulk and tap densities were determined to be 3.678 ±} 0.2 and 4.81 ± 0.2 g/cm 3 }, respectively (crystalline density is 7.3 g/cm 3 ). The stoichiometry was measured to be 2.99 in 2012.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Determining Relative f and d Orbital Contributions to M–Cl Covalency in MCl 6 2– (M = Ti, Zr, Hf, U) and UOCl 5 – Using Cl K-Edge X-ray Absorption Spectroscopy and Time-Dependent Density Functional Theory

Chlorine K-edge X-ray absorption spectroscopy (XAS) and ground-state and time-dependent hybrid density functional theory (DFT) were used to probe electronic structure for O{sub h}-MCl{sub 6}{sup 2-}(M = Ti, Zr, Hf, U) and C{sub 4v}-UOCl{sub 5}{sup -}, and to determine the relative contributions of valence 3d, 4d, 5d, 6d, and 5f orbitals in M-Cl bonding. Spectral interpretations were guided by time-dependent DFT calculated transition energies and oscillator strengths, which agree well with the experimental XAS spectra. The data provide new spectroscopic evidence for the involvement of both 5f and 6d orbitals in actinide-ligand bonding in UCl{sub 6}{sup 2-}. For the MCl{sub 6}{sup 2-}, where transitions into d orbitals of t{sub 2g} symmetry are spectroscopically resolved for all four complexes, the experimentally determined Cl 3p character per M-Cl bond increases from 8.3(4)% (TiCl{sub 6}{sup 2-}) to 10.3(5)% (ZrCl{sub 6}{sup 2-}), 12(1)% (HfCl{sub 6}{sup 2-}), and 26 18(1)% (UCl{sub 6}{sup 2-}). Chlorine K-edge XAS spectra of UOCl{sub 5}{sup -} provide additional insights into the transition assignments by 27 lowering the symmetry to C{sub 4v}, where five pre-edge transitions into both 5f and 6d orbitals are observed. For UCl{sub 6}{sup 2-}, the XAS data 28 suggest that orbital mixing associated with the U 5f orbitals is considerably lower than that of the U 6d orbitals. For both UCl{sub 6}{sup 2-}29 and UOCl{sub 5}{sup -}, the ground-state DFT calculations predict a larger 5f contribution to bonding than is determined experimentally. 30 These findings are discussed in the context of conventional theories of covalent bonding for d- and f-block metal complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗