Search NASA⌕ Search

Engineering topics

Wang, Gang

Publications and source records attributed to Wang, Gang.

At least 37 records · Page 2

Stabilizing a Li–Mn–O Cathode by Blocking Lattice O Migration through a Nanoscale Phase Complex

Among all intercalation cathodes for Li-ion batteries, Li–Mn–O layered oxides offer the highest initial energy density at the lowest cost, due to the joint contribution from cationic and anionic redox chemistry. However, the poor cycling capability, resulting from the continuous lattice O loss at high potentials (>4.5 V), hinders practical applications. Herein, we employed phase complex engineering to obtain a new Li–Mn–O nanohybrid cathode featuring the uniform and coherent integration of layered nanodomains and spinel nanodomains. The combination of DFT calculations, synchrotron-based transmission X-ray microscopy, in situ differential electrochemical mass spectrometry, in situ synchrotron XRD, and electrochemical tests demonstrated that the O migration path in layered nanodomains was blocked by the neighboring spinel nanodomains with a higher oxygen vacancy migration energy, thus effectively suppressing the irreversible lattice O loss at high potentials and enhancing the cycling stability in both capacity and average voltage. Finally, the strategy is experimentally demonstrated to be effective and it leads to a new path for developing stable high-energy-density cathode materials.

25 ENERGY STORAGE↗

Progress on the experimental search for the chiral magnetic effect, the chiral vortical effect, and the chiral magnetic wave

In quantum chromodynamics, the interactions of quarks with the topological gluon field can lead to nonconservation of local parity (P) and conjugated parity (CP) , which provides a solution to the strong CP problem and a possibility to explain the asymmetry of matter-antimatter in the current universe. Under the action of a strong magnetic field, the nonconservation of P and CP can lead to the separation of particles according to their electric charges, which is called the chiral magnetic effect (CME). An observation of the CME-induced charge separation will confirm several fundamental properties of quantum chromodynamics (QCD), namely, approximate chiral symmetry restoration, topological charge fluctuation, and local parity violation. In relativistic heavy-ion collisions, there are other chiral anomalous effects similar to the CME, such as the chiral vortical effect (CVE) and the chiral magnetic wave (CMW). This review briefly summarizes the current progress of experimental research on the CME, CVE, and CMW in relativistic heavy-ion collisions.

Physics↗

Individualized empirical baselines for evaluating the energy performance of existing buildings

The evaluation of building energy performance requires a baseline for comparison. Common empirical baselines are usually used for existing buildings since they are fast and convenient. However, the same type of building at the same location will receive the same baseline despite their difference in usage. Individualized baselines by creating building energy models are possible solutions, but it is labor intensive and time-consuming. To fill the gap, this study is to develop individualized empirical baselines for existing buildings in a fast way. First, common empirical baselines are created based on survey data. Then, to get training samples, building energy models for large-scale existing buildings are created and simulated. So finally, based on simulation results, mathematical models to get individualized empirical baselines in a fast way are created. U.S. medium office buildings were used as an example to demonstrate the method. We developed 30 mathematical models for medium office buildings in two vintages (constructed before 1980 and after 1980) and 15 climate zones. The mean absolute percentage errors (MAPE) between the individualized empirical baselines and the modeled baselines for those 30 mathematical models are all lower than 5.5%. An engineer can obtain the individualized empirical baseline for an existing building in a few seconds by using the open-source tool we developed.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Creating two-dimensional solid helium via diamond lattice confinement

The universe abounds with solid helium in polymorphic forms. Therefore, exploring the allotropes of helium remains vital to our understanding of nature. However, it is challenging to produce, observe and utilize solid helium on the earth because high-pressure techniques are required to solidify helium. Here we report the discovery of room-temperature two-dimensional solid helium through the diamond lattice confinement effect. Controllable ion implantation enables the self-assembly of monolayer helium atoms between {100} diamond lattice planes. Using state-of-the-art integrated differential phase contrast microscopy, we decipher the buckled tetragonal arrangement of solid helium monolayers with an anisotropic nature compressed by the robust diamond lattice. These distinctive helium monolayers, in turn, produce substantial compressive strains to the surrounded diamond lattice, resulting in a large-scale bandgap narrowing up to ~2.2 electron volts. This approach opens up new avenues for steerable manipulation of solid helium for achieving intrinsic strain doping with profound applications.

42 ENGINEERING↗

Evaluation of nonlinear control performance of air handling units under variable operation conditions using root distribution approach

The control systems at Air handling units (AHUs) have nonlinear nature, resulting potentially in sluggish, aggressive, or oscillatory responses under variable operation conditions. This paper is to develop an approach for evaluating the nonlinear control performance of AHUs under variable operation conditions and for identifying the impact of varying multiple operation parameters which guides controller design. To do so, an operation parameter-based root distribution technique, intended to sketch the paths traced by closed-loop poles as multiple operation parameters are varied, is first introduced. The technique—which may be viewed as an extension of conventional, single-variable root locus—is then applied to a fan speed control system that includes a motor with a variable frequency drive and a supply fan with an air duct under variable fan speed and duct static pressure. Using the technique, the system’s stability region is graphically identified. The system is also found to be aggressive and gradually lose its stability as the fan speed decreases and the duct static pressure increases, which is validated by the field tests. Here, the root distribution approach is an effective tool to evaluate the performance of any nonlinear control systems at AHUs with multiple variable operation parameters without requiring time-domain simulations.

42 ENGINEERING↗

Topological Crystalline Insulator Candidate ErAsS with Hourglass Fermion and Magnetic-Tuned Topological Phase Transition

Topological crystalline insulators (TCIs) with hourglass fermion surface state have attracted a lot of attention and are further enriched by crystalline symmetries and magnetic order. Here, the emergence of hourglass fermion surface state and exotic phases in the newly discovered, air-stable ErAsS single crystals are shown. In the paramagnetic phase, ErAsS is expected to be a TCI with hourglass fermion surface state protected by the nonsymmorphic symmetry. Dirac-cone-like bands and nearly linear dispersions in large energy range are experimentally observed, consistent well with theoretical calculations. Below T N ≈ 3.27 K, ErAsS enters a collinear antiferromagnetic state, which is a trivial insulator breaking the time-reversal symmetry. An intermediate incommensurate magnetic state appears in a narrow temperature range (3.27–3.65 K), exhibiting an abrupt change in magnetic coupling. Overall, the results reveal that ErAsS is an experimentally available TCI candidate and provide a unique platform to understand the formation of hourglass fermion surface state and explore magnetic-tuned topological phase transitions.

36 MATERIALS SCIENCE↗

Decreasing the Overpotential of Aprotic Li-CO 2 Batteries with the In-Plane Alloy Structure in Ultrathin 2D Ru-Based Nanosheets

We report the aprotic Li-CO 2 battery is emerging as a promising energy storage technology with the capability of CO 2 fixation and conversion. However, its practical applications are still impeded by the large overpotential. Herein, the general synthesis of a series of ultrathin 2D Ru-M (M = Co, Ni, and Cu) nanosheets by a facile one-pot solvothermal method is reported. As a proof-of-concept application, the representative RuCo nanosheets are used as the cathode catalysts for Li-CO 2 batteries, which demonstrate a low charge voltage of 3.74 V, a small overpotential of 0.94 V, and hence a high energy efficiency of 75%. Ex/in situ studies and density functional theory calculations reveal that the excellent catalytic performance of RuCo nanosheets originates from the enhanced adsorption toward Li and CO 2 during discharge as well as the elevated electron interaction with Li 2 CO 3 during charge by the in-plane RuCo alloy structure. This work indicates the feasibility of boosting the electrochemical performance of Li-CO 2 batteries by in-plane metal alloy sites of ultrathin 2D alloy nanomaterials.

25 ENERGY STORAGE↗

Improving the nonlinear control performance of the supply fan at air handling units using a gain scheduling control strategy

Due to its nonlinear nature, the supply fan at air handling units with the controller tuned at the design condition tends to be aggressive and oscillate under partial load conditions. Here, the objective of this paper is to develop and validate a gain scheduling control strategy to improve its nonlinear control performance. First, a control-oriented model, which does not require numerous physical parameters and extensive test data, is developed to study the nonlinearity of the fan system. Based on the theoretical model and experimental verifications, the issue of an aggressive response with a conventional fixed-gain controller is caused by the fact that the system gain is proportional to the ratio of the duct static pressure to the fan speed. To address the issue, a scheduling function of the measurable duct static pressure and fan speed is proposed to be included in the conventional fixed-gain controller to compensate for the fan system gain variation. The gain scheduling control strategy is found to approximately maintain the identical control performance under all operation conditions. Most importantly, the gain scheduling control strategy can be readily implemented without intensive computation and additional measurements, showing a promising potential in industrial applications.

42 ENGINEERING↗

Flow-plane decorrelations in heavy-ion collisions with multiple-plane cumulants

The azimuthal correlations between local flow planes at different (pseudo)rapidities (η) may reveal important details of the initial nuclear matter density distributions in heavy-ion collisions. Extensive experimental measurements of a factorization ratio (r 2 ) and its derivative (F 2 ) have shown evidence of the longitudinal flow-plane decorrelation. However, nonflow effects also affect this observable and prevent a quantitative understanding of the phenomenon. In this paper, to distinguish decorrelation and nonflow effects, we propose a new cumulant observable, T 2 , which largely suppresses nonflow. Here, the technique sensitivity to different initial-state scenarios and nonflow effects are tested with a simple Monte Carlo model, and in the end, the method is applied to events simulated by a multiphase transport model (AMPT) for Au+Au collisions at $\sqrt{s_{NN}}$ = 200 GeV. We also emphasize that a distinct decorrelation signal requires not only the right sign of an observable but also its proper dependence on the η window of the reference flow plane to be consistent with the pertinent decorrelation picture.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

An Efficient Rechargeable Aluminium–Amine Battery Working Under Quaternization Chemistry

Rechargeable aluminium (Al) batteries (RABs) have long-been pursued due to the high sustainability and three-electron-transfer properties of Al metal. However, limited redox chemistry is available for rechargeable Al batteries, which restricts the exploration of cathode materials. Herein, we demonstrate an efficient Al–amine battery based on a quaternization reaction, in which nitrogen (radical) cations (R 3 N .+ or R 4 N + ) are formed to store the anionic Al complex. The reactive aromatic amine molecules further oligomerize during cycling, inhibiting amine dissolution into the electrolyte. Consequently, the constructed Al–amine battery exhibits a high reversible capacity of 135 mAh g -1 along with a superior cycling life (4000 cycles), fast charge capability and a high energy efficiency of 94.2 %. Moreover, the Al–amine battery shows excellent stability against self-discharge, far beyond conventional Al–graphite batteries. Our findings pave an avenue to advance the chemistry of RABs and thus battery performance.

25 ENERGY STORAGE↗

Utilization of event shape in search of the chiral magnetic effect in heavy-ion collisions

The search for the chiral magnetic effect (CME) has been a subject of great interest in the field of high-energy heavy-ion collision physics, and various observables have been proposed to probe the CME. Experimental observables are often contaminated with background contributions arising from collective motions (specifically elliptic flow) of the collision system. We present a method study of event-shape engineering (ESE) that projects the CME-sensitive γ 112 correlator and its variations (γ 132 and γ 123 ) to a class of events with minimal flow. We discuss the realization of the zero-flow mode, the sensitivity on the CME signal, and the corresponding statistical significance for Au + Au, Ru + Ru, and Zr + Zr collisions at √s NN = 200 GeV with a multiphase transport model, as well as a new event generator, event-by-event anomalous-viscous fluid dynamics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Investigation of experimental observables in search of the chiral magnetic effect in heavy-ion collisions in the STAR experiment *

The chiral magnetic effect (CME) is a novel transport phenomenon, arising from the interplay between quantum anomalies and strong magnetic fields in chiral systems. In high-energy nuclear collisions, the CME may survive the expansion of the quark-gluon plasma fireball and be detected in experiments. Over the past two decades, experimental searches for the CME have attracted extensive interest at the Relativistic Heavy Ion Collider (RHIC) and the Large Hadron Collider (LHC). The main goal of this study is to investigate three pertinent experimental approaches: the $γ$ correlator, the R correlator, and the signed balance functions. We exploit simple Monte Carlo simulations and a realistic event generator (EBE-AVFD) to verify the equivalence of the core components among these methods and to ascertain their sensitivities to the CME signal and the background contributions for the isobar collisions at the RHIC.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Summary of the CeC Experiment in RHIC Run 21

The coherent electron cooling (CeC) experiment at RHIC is crucial for determining the feasibility of this technique for cooling the hadron beam in the electron-ion collider (EIC) and reaching the luminosity of 10 34 cm -1 s -1 . During RHIC Run 21, various progresses have been made including successfully commissioning the time resolved diagnostic beam line (TRDBL), achieving the key performance parameters (KPP) of the system and the development of novel methods for accurate alignment of the electron beam with the ion beam. While the longitudinal cooling of the ion beam with cooling time of 100 hours was observed during Run 21, it was related to the traditional electron cooling since the cooling rate was not as sensitive to the energy of the electron beam as what one would expect from the CeC. In Run 21, we were not able to observe the longitudinal cooling of the ion beam caused by CeC and the main challenges are identified as the insufficient stability of the electrons' energy. The sources of the energy jitter have been identified and we are making improvements to the stability of the CeC system for Run 22.

43 PARTICLE ACCELERATORS↗

Influences of the transverse motions of the particles to the recombination rate of a co-propagating electron-ion system

For a system with the ion beam co-propagating with the electron beam, such as a traditional electron cooler or a Coherent electron Cooler (CeC), the recombination rate is an important observable for matching the energy of the electrons with the ions. In this work, we have developed the analytical expressions to investigate how the recombination rate depends on the energy difference of the two beams, with the influences from the transverse motions of the particles being considered. The analytical results are then used to analyze the measured recombination data collected during the CeC experiment in run 21.

43 PARTICLE ACCELERATORS↗

Quasi-One-Dimensional Structure and Possible Helical Antiferromagnetism of RbMn 6 Bi 5

Quasi-one-dimensional materials exhibit not only unique crystal structure but also abundant physical properties such as charge density wave, Luttinger liquid, and superconductivity. In this study, we report the discovery, structure, and physical properties of a new manganese-based quasi-one-dimensional material RbMn 6 Bi 5 , which crystallizes in a monoclinic space group C 2/ m (No. 12) with lattice parameters a = 23.286(5) Å, b = 4.6215(9) Å, c = 13.631(3) Å, and β = 125.00(3)°. The structure features [Mn 6 Bi 5 ] –1 double-walled column extending along the [010] direction, together with Bi–Bi homoatomic bonds linking the columns and the countercation Rb + . The temperature-dependent resistivity clearly indicates a significant resistivity anisotropy for RbMn 6 Bi 5 , whereas the magnetic susceptibility and specific heat measurements show that RbMn 6 Bi 5 is antiferromagnetic below 82 K. The density functional theory calculations indicate that RbMn 6 Bi 5 is a quasi-one-dimensional metal with possible helical antiferromagnetic configuration. The discovery of RbMn 6 Bi 5 confirms the viability of discovering new quasi-one-dimensional materials in manganese-based compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗