Search NASA⌕ Search

Engineering topics

Wolverton, Christopher

Publications and source records attributed to Wolverton, Christopher.

At least 55 records · Page 3

Strong Valence Band Convergence to Enhance Thermoelectric Performance in PbSe with Two Chemically Independent Controls

Abstract We present an effective approach to favorably modify the electronic structure of PbSe using Ag doping coupled with SrSe or BaSe alloying. The Ag 4d states make a contribution to in the top of the heavy hole valence band and raise its energy. The Sr and Ba atoms diminish the contribution of Pb 6s 2 states and decrease the energy of the light hole valence band. This electronic structure modification increases the density‐of‐states effective mass, and strongly enhances the thermoelectric performance. Moreover, the Ag‐rich nanoscale precipitates, discordant Ag atoms, and Pb/Sr, Pb/Ba point defects in the PbSe matrix work together to reduce the lattice thermal conductivity, resulting a record high average ZT avg of around 0.86 over 400–923 K.

Luo, Zhong‐Zhen↗

Favorable Redox Thermodynamics of SrTi 0.5 Mn 0.5 O 3–δ in Solar Thermochemical Water Splitting

Two-step, solar thermochemical splitting of water using nonstoichiometric redox-active metal oxides has emerged as an intriguing approach for large-scale hydrogen production. Perovskites have been proposed as alternatives to state-of-the-art fluorite CeO 2–δ because of their potential for lowering reduction temperature while maintaining high fuel productivity. Guided by computational insights, we explore the thermodynamic properties and water splitting efficacy of the cubic perovskite SrTi 0.5 Mn 0.5 O 3–δ (STM55). Thermogravimetric analysis is performed under controlled oxygen partial pressures (pO 2 ) and temperatures up to 1500 °C, from which both the enthalpy and entropy of reduction as a function of oxygen nonstoichiometry are determined. STM55 provides an attractive combination of moderate enthalpy, 200–250 kJ (mol-O) –1 , and high entropy, with unusual δ dependence. Using a water splitting cycle in which the material is thermally reduced at 1350 °C (pO 2 , ~10 –5 atm) and subsequently exposed to steam at 1100 °C (steam partial pressure of pH 2 O = 0.4 atm), we demonstrate a hydrogen yield of 7.4 mL g –1 . Through both half-cycles, the material remains largely in quasi-equilibrium with the gas phase, as reflected in the agreement of the measured data with predicted profiles based on the thermodynamic data. This behavior indicates rapid surface and bulk diffusion kinetics. Cyclic operation showed the material to be free of degradation and always resulted in a 2:1 yield of H 2 /O 2 . Altogether, STM55 provides outstanding performance characteristics for thermochemical hydrogen production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strong Valence Band Convergence to Enhance Thermoelectric Performance in PbSe with Two Chemically Independent Controls

We present an effective approach to favorably modify the electronic structure of PbSe using Ag doping coupled with SrSe or BaSe alloying. The Ag 4d states make a contribution to in the top of the heavy hole valence band and raise its energy. The Sr and Ba atoms diminish the contribution of Pb 6s2 states and decrease the energy of the light hole valence band. This electronic structure modification increases the density-of-states effective mass, and strongly enhances the thermoelectric performance. Furthermore, the Ag-rich nanoscale precipitates, discordant Ag atoms, and Pb/Sr, Pb/Ba point defects in the PbSe matrix work together to reduce the lattice thermal conductivity, resulting a record high average ZT avg of around 0.86 over 400–923 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultralow thermal conductivity in diamondoid lattices: high thermoelectric performance in chalcopyrite Cu 0.8+y Ag 0.2 In 1–y Te 2

Because of its unique transport properties, CuInTe 2 has been considered as a promising p-type material for thermoelectric applications. However, its diamondoid structure gives it a high intrinsic lattice thermal conductivity that greatly limits its thermoelectric performance. In this study, we demonstrate that Ag alloying gives rise to an extremely low lattice thermal conductivity of 0.47 W m –1 K –1 for Cu 0.8 Ag 0.2 InTe 2 at 850 K. Moreover, we found Cu doping significantly improves the carrier mobility while simultaneously increasing the carrier concentraton. As a result, the power factor of Cu 0.8 Ag 0.2 InTe 2 increases and a maximum ZT of ~1.6 is achieved at 850 K. Both DFT calculations and low temperature heat capacity measurements suggest a strong interaction between low frequency optical phonons and heat carrying acoustic phonons, which is derived from the weak Ag–Te bonding. Here, this strong phonon coupling decreases the Debye temperature and induces a low sound velocity.

36 MATERIALS SCIENCE↗

Inverse Design of Ultralow Lattice Thermal Conductivity Materials via Materials Database Screening of Lone Pair Cation Coordination Environment

The presence of lone pair (LP) electrons is strongly associated with the disruption of lattice heat transport, which is a critical component of strategies to achieve efficient thermoelectric energy conversion. By exploiting an empirical relationship between lattice thermal conductivity, κ L , and the bond angles of pnictogen group LP cation coordination environments, we develop an inverse design strategy based on a materials database screening to identify chalcogenide materials with ultralow κ L for thermoelectrics. Screening the ~635 000 real and hypothetical inorganic crystals of the Open Quantum Materials Database based on the constituent elements, nominal electron counting, LP cation coordination environment, and synthesizability, we identify 189 compounds expected to exhibit ultralow κ L . As a validation, we explicitly compute the lattice dynamical properties of two of the compounds (Cu 2 AgBiPbS 4 and MnTl 2 As 2 S 5 ) using first-principles calculations and successfully find both achieve ultralow κ L values at room temperature of ~0.3-0.4 W/(m·K) corresponding to the amorphous limit. Furthermore, our data-driven approach provides promising candidates for thermoelectric materials and opens new avenues for the design of phononic properties of materials.

36 MATERIALS SCIENCE↗

All-Inorganic Halide Perovskites as Potential Thermoelectric Materials: Dynamic Cation off-Centering Induces Ultralow Thermal Conductivity

Halide perovskites are anticipated to impact next generation high performance solar cells because of their extraordinary charge transport and optoelectronic properties. However, their thermal transport behavior has received limited attention. In this work, we studied the thermal transport and thermoelectric properties of the CsSnBr 3–x I x perovskites. We find a strong correlation between lattice dynamics and an ultralow thermal conductivity for series CsSnBr 3–x I x reaching 0.32 Wm –1 K –1 at 550 K. The CsSnBr 3–x I x also possess a decent Seebeck coefficient and controllable electrical transport properties. The crystallography data and theoretical calculations suggest the Cs atom deviates from its ideal cuboctahedral geometry imposed by the perovskite cage and behaves as a heavy atom rattling oscillator. This off-center tendency of Cs, together with the distortion of SnX 6 (X = Br or I) octahedra, produces a highly dynamic and disordered structure in CsSnBr 3–x I x , which gives rise to a very low Debye temperature and phonon velocity. Moreover, the low temperature heat capacity data suggests strong coupling between the low frequency optical phonons and heat carrying acoustical phonons. In conclusion, this induces strong phonon resonance scattering that induces the ultralow lattice thermal conductivity of CsSnBr 3–x I x .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultralow Thermal Conductivity and Thermoelectric Properties of Rb 2 Bi 8 Se 13

Complex bismuth chalcogenides are narrow band gap semiconductors with intrinsic low thermal conductivity, which exhibit high potential as highly efficient thermoelectric materials. Here, we assess the basic thermoelectric properties of polycrystalline Rb 2 Bi 8 Se 13 in the temperature range 300-823 K as well as performance-optimizing strategies. We find that the as-made bulk samples are single phase with the monoclinic crystal structure (P2 1 /m) and crystallize in layer morphology. The pristine sample exhibits an exceedingly low lattice thermal conductivity of 0.6- 0.46 W·m -1 ·K -1 at 300-823 K, which derives from strong lattice anharmonicity, large Grüneisen parameters, and low phonon velocities induced by the complex crystal structure with heavy atom Bi and a large unit cell. Here, the Cl doping successfully enhances the carrier concentration in Rb 2 Bi 8 Se 13 with a negligible impact on the electronic band structure, displaying common doping behaviors. Se vacancy, on the contrary, leads to n-type doping and enhances the effective mass and power factors more significantly. Consequently, a maximum ZT of ~0.75 at 823 K for the 0.3% Se-vacancy-doped sample is obtained.

36 MATERIALS SCIENCE↗

Crystal structure and luminescence properties of lead-free metal halides (C 6 H 5 CH 2 NH 3 ) 3 MBr 6 (M = Bi and Sb)

Organic–inorganic hybrid metal halides have received extensive attention owing to their versatile structures and optoelectronic properties. Herein, we report two lead-free metal halides, (PMA) 3 BiBr 6 and (PMA) 3 SbBr 6 [PMA + : (C 6 H 5 CH 2 NH 3 ) + , as the abbreviation of phenylmethylammonium], which possess iso-structural zero-dimensional structures and crystallize in the monoclinic space group P2 1 /c. (PMA) 3 BiBr 6 and (PMA) 3 SbBr 6 exhibit optical band gaps of ~3.50 and 3.40 eV, respectively, and density functional theory calculations reveal their indirect bandgap behaviors. Upon 350 and 425 nm excitation, (PMA) 3 BiBr 6 and (PMA) 3 SbBr 6 exhibit broadband emission peaking at 510 nm and 625 nm with wide full-widths at half-maximum of ~153 and 175 nm, respectively. The emission mechanism of the metal halides is attributed to self-trapped exciton emission. The relationship between the crystal structure and luminescence intensity is also discussed. Lastly, both metal halides have high decomposition temperatures and are stable for long-term storage under ambient conditions, demonstrating their potential for optoelectronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fundamental Insights from a Single-Crystal Sodium Iridate Battery

Electrochemically driven chemical transformations play the key role in controlling storage of energy in chemical bonds and subsequent conversion to power electric vehicles and consumer electronics. The promise of coupling anionic oxygen redox with cationic redox to achieve a substantial increase in capacities has inspired research in a wide range of electrode materials. A key challenge is that these studies have focused on polycrystalline materials, where it is hard to perform precise structural determinations, especially related to the location of light atoms. Here a different approach is utilized and a highly ordered single crystal, Na 2-x IrO 3 is harnessed, to explore the role of defects and structural transformations in layered transition metal oxide materials on redox-activity, capacity, reversibility, and stability. Within a combined experimental and theoretical framework, it is demonstrated that 1) it is possible to cycle Na 2-x IrO 3 , offering proof of principle for single-crystal based batteries 2) structural phase transitions coincide with Ir 4+ /Ir 5+ redox couple with no evident contribution from anionic redox 3) strong irreversibility and capacity fade observed during cycling correlates with the Na + migration resulting in progressive growth of an electrochemically inert O 3 -type NaIrO 3 phase.

25 ENERGY STORAGE↗

Quasilinear dispersion in electronic band structure and high Seebeck coefficient in CuFeS 2 -based thermoelectric materials

The earth-abundant natural mineral chalcopyrite CuFeS 2 is a potential n-type thermoelectric material because of its large Seebeck coefficient at high carrier concentrations. For a long time, the large Seebeck coefficient of CuFeS 2 has been attributed to a large electron effective mass, but the reasons for this and the unusual carrier concentration dependent behavior have rarely been discussed. Here, we systematically investigated the special transport behavior of CuFeS 2 and found the classical parabolic band model to be inadequate in explaining it. Our experimental and theoretical studies indicate that there are two flat electronic pockets at the and Z points of the Brillouin zone near the conduction band edge of CuFeS 2 that dominate the charge transport. These electronic pockets result from nonparabolic quasilinearly dispersing bands that give rise to a linear wave vector dependent energy (E ~ k) and a carrier density dependent effective mass (m* ~ m 0 n 1/3 ). Such a strong carrier concentration dependent carrier effective mass results in the high Seebeck coefficient of CuFeS 2 compound under a large carrier density. Here, the work demonstrates that quasilinearly dispersing bands can give strongly enhanced Seebeck coefficient, and could be useful in optimizing the properties of thermoelectric materials.

36 MATERIALS SCIENCE↗

Direct Visualization of Electric-Field-Induced Structural Dynamics in Monolayer Transition Metal Dichalcogenides

Layered transition metal dichalcogenides offer many attractive features for next-generation low-dimensional device geometries. Due to the practical and fabrication challenges related to in situ methods, the atomistic dynamics that give rise to realizable macroscopic device properties are often unclear. Here in this study, in situ transmission electron microscopy techniques are utilized in order to understand the structural dynamics at play, especially at interfaces and defects, in the prototypical film of monolayer MoS 2 under electrical bias. Through our sample fabrication process, we clearly identify the presence of mass transport in the presence of a lateral electric field. In particular, we observe that the voids present at grain boundaries combine to induce structural deformation. The electric field mediates a net vacancy flux from the grain boundary interior to the exposed surface edge sites that leaves molybdenum clusters in its wake. Following the initial biasing cycles, however, the mass flow is largely diminished and the resultant structure remains stable over repeated biasing. We believe insights from this work can help explain observations of nonuniform heating and preferential oxidation at grain boundary sites in these materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Discordant nature of Cd in PbSe: off-centering and core–shell nanoscale CdSe precipitates lead to high thermoelectric performance

We report a novel hierarchical microstructure in the PbSe–CdSe system, which collectively contributes to significant enhancement in thermoelectric performance, with ZT ave ~ 0.83 across the 400–923 K temperature range, the highest reported for p-type, Te-free PbSe systems. We have investigated the local atomic structure as well as the microstructure of a series of PbSe–xCdSe materials, up to x = 10%. We find that the behavior of the Cd atoms in the octahedral rock salt sites is discordant and results in off-center displacement and distortion. Such off-centered Cd in the PbSe matrix creates (1) L–Σ electronic energy band convergence, (2) a flattened L band, both contributing to higher Seebeck coefficients, and (3) enhanced phonon scattering, which leads to lower thermal conductivity. These conclusions are supported by photoemission yield spectroscopy in air (PYSA), solid state 111 Cd, 77 Se NMR spectroscopy and DFT calculations. Above the solubility limit (>6%CdSe), we also observe endotaxial CdSe nano-precipitates with core–shell architecture formed in PbSe, whose size, distribution and structure gradually change with the Cd content. The nano-precipitates exhibit a zinc blende crystal structure and a tetrahedral shape with significant local strain, but are covered with a thin wurtzite layer along the precipitate/matrix interface, creating a core–shell structure embedded in PbSe. This newly discovered architecture causes a further reduction in lattice thermal conductivity. Furthermore, potassium is found to be an effective p-type dopant in the PbSe–CdSe system, leading to an enhanced power factor, a maximum ZT of ~1.4 at 923 K for Pb 0.98 K 0.02 Se–6%CdSe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Large Thermal Conductivity Drops in the Diamondoid Lattice of CuFeS 2 by Discordant Atom Doping

Doping in a lattice refers to the introduction of very small quantities of foreign atoms and has a generally small effect on decreasing the lattice thermal conductivity, unlike alloying which involves large fractions of other elements and strongly enhances point defect phonon scattering. Here, we report that, by alloying only 3% of In on the Cu sites of the diamond-like lattice of CuFeS 2 chalcopyrite compound (Cu 1-x In x FeS 2 , x = 0.03) has a disproportionally large effect in reducing the lattice thermal conductivity of the compound from 2.32 to 1.36 Wm -1 K -1 at 630 K. We find that In is not fully ionized to +3 when on the Cu sublattice and exists mainly in the +1 oxidation state. The 5s 2 lone pair of electrons of In + makes this atom incompatible (referred to as discordant) with the tetrahedral geometry of the crystallographic site. This causes strong local bond distortions thereby softening the In-S and Cu-S chemical bonds and introducing localized low frequency vibrations. The latter couple with the base phonon frequencies of the CuFeS 2 matrix enhancing the anharmonicity and decreasing the phonon velocity, and consequently the lattice thermal conductivity. Here, the control material in which the In doping is on the Fe 3+ site of the structure at the same doping level (and found in the site-compatible In 3+ state), has a far smaller effect on the phonon scattering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase Stability and Ordering in Rock Salt-Based Thermoelectrics: NaSbX 2 , AgSbX 2 , and Their Alloys with PbX and SnX (X = S, Se, Te)

Using first-principles density functional calculations, we study the phase stability and cation ordering behavior in ABX 2 , PbX-ABX 2 , and SnTe-ABTe 2 (A = Na, Ag; B = Sb; X = S, Se, Te) thermoelectrics that crystallize in rock salt-based lattices. We construct, separately for each ABX 2 system, cluster expansions fitted to T = o K energies of cation-ordered arrangements in order to identify the respective ground-state structures. We calculate the mixing energetics of A/B and {Pb, Sn}/AB cation-disordered solid solutions in ABX 2 and {Pb, Sn}X-ABX 2 systems, respectively, using special quasirandom structures. We find that (i) L11, a rock salt-based superlattice with A 1 B 1 stacking of cations along [111], is often the most favored cation ordering type across ABX 2 systems due to the ability of this superlattice structure to accommodate large size mismatches between A and B; (ii) A/B cation ordering is only weakly preferred over disorder in all ABX 2 systems, by <34 meV/cation, consistent with experimental observations of disordered rock salt phases at high temperatures; (iii) Na-containing ABX 2 systems strongly favor the formation of the ternary compound over the corresponding ground-state mixture of A 2 X + B 2 X 3 binary compounds, while Ag-containing ABX 2 systems do not; (iv) the experimentally reported noncubic phases of NaSbS 2 and AgSbS 2 are in fact distorted cation-ordered rock salt structures; and (v) all {Pb, Sn}X-ABX 2 systems show miscibility gaps in their phase diagrams, and this is partly due to the unfavorable electrostatics of ternary cation mixing relative to Pb or Sn + AB cation phase separation; however, estimation of the miscibility gap temperature using mean-field configurational entropy indicates that all systems except PbTe-AgSbTe 2 will readily mix at relatively low temperatures. Furthermore, our study of the structural properties, alloying behavior, and solubility limits in these promising materials is a crucial step forward in improving their thermoelectric performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dimensionally driven crossover from semimetal to direct semiconductor in layered SbAs

Two-dimensional (2D) materials have attracted a great deal of attention because they exhibit intriguing physical and chemical properties with great potential applications in electronic and optoelectronic devices, and even energy conversion. Due to the high anisotropy and unique crystal structure of layered materials, the properties can be effectively tuned by simply reducing dimensions to 2D. In this work, a unique 2D semiconductor, namely, monolayered SbAs, with high stability and indirect band gap, is predicted on the basis of first-principles calculations together with cluster expansion and Monte Carlo simulations. Interestingly, although the bulk antimony arsenide compound SbAs is known to exhibit semimetallic behavior, our calculations find that it is transformed into a direct semiconductor with a band gap of 1.28 eV when thinned down to a single atomic layer. The monolayer with antisite defects is transformed from indirect into a direct band-gap semiconductor. Such dramatic changes in the electronic structure could pave the way for SbAs to play a role in electronic device applications. Moreover, we find that the interlayer interactions in SbAs lead to a higher exfoliation energy than typical transition metal dichalcogenides such as MoS 2 , and hence we suggest that chemical deposition methods might be better than mechanical exfoliation methods for obtaining monolayer samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Computational prediction of nanostructured alloys with enhanced thermoelectric properties

The Materials Genome Initiative calls for a dramatic increase in the rate of materials discovery and development. High-throughput (HT) calculations can advance this goal by efficiently screening a large search space for candidate materials to study in more depth. Thermoelectric materials (TEs) are prime candidates for such HT calculations: The properties required to achieve good performance are known, but systematic ways of improving these properties are scarce. Furthermore, known HT methods for TEs only address bulk crystals—screening realistic multicomponent alloys for their TE properties has yet to be accomplished. In this paper, we use a density functional theory driven HT screening-and-sorting procedure to search for new multicomponent bulk-nanostructured thermoelectric materials. We make maximum use of minimal calculations to obtain eight descriptors of the thermodynamics and TE performance of five-element semiconductor alloy systems from combinations of ternary additions in binary compounds. We use these descriptors to reduce a search space of 29 700 five-element systems to a set of 130 candidates. Lastly, we screen these candidates using TE descriptors to identify several existing high-performance thermoelectrics as well as promising new material systems awaiting further experimental verification.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Antiferromagnetic Semiconductor BaFMn 0.5 Te with Unique Mn Ordering and Red Photoluminescence

Semiconductors possessing both magnetic and optoelectronic properties are rare and promise applications in opto-spintronics. In this work, we report the mixed-anion semiconductor BaFMn 0.5 Te with a band gap of 1.76 eV and a work function of 5.08 eV, harboring both antiferromagnetism (AFM) and strong red photoluminescence (PL). The synthesis of BaFMn 0.5 Te in quantitative yield was accomplished using the "panoramic synthesis" technique and synchrotron radiation to obtain the full reaction map, from which we determined that the compound forms upon heating at 850 degrees C via an intermediate unknown phase. The structure refinement required the use of a (3+1)-dimensional superspace group Cmme(alpha 01/2)0ss. The material crystallizes into a ZrCuSiAs-like structure with alternating [BaF] + and [Mn0.5Te] - layers and has a commensurately modulated structure with the q-vector of 1/6a* + 1/6b* + 1/2c* at room temperature arising from the unique ordering pattern of Mn 2+ cations. Long-range AFM order emerges below 90 K, with two-dimensional short-range AFM correlations above the transition temperature. First-principles calculations suggest that BaFMn 0.5 Te is an indirect band gap semiconductor with the gap opening between Te 5p and Mn 3d orbitals, and the magnetic interactions between nearest-neighbor Mn 2+ atoms are antiferromagnetic. Steady-state PL spectra show a broad strong emission centered at similar to 700 nm, which we believe originates from the energy manifolds of the modulated Mn 2+ sublattice and its defects. Time-resolved PL measurements reveal an increase in excited-state lifetimes with longer probe wavelengths, from 93 ns (at 650 nm) to 345 ns (at 800 nm), and a delayed growth (6.5 ± 0.3 ns) in the kinetics at 800 nm with a concomitant decay (4.1 ± 0.1 ns) at 675 nm. Together, these observations predict that there are multiple emissive states, with higher energy states populating lower energy states by energy transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Figure of Merit in Gallium-Doped Nanostructured n-Type PbTe-xGeTe with Midgap States

PbTe-based thermoelectric materials are some of the most promising for converting heat into electricity, but their ntype versions still lag in performance the p-type ones. Here, we introduce midgap states and nanoscale precipitates using Gadoping and GeTe-alloying to considerably improve the performance of n-type PbTe. The GeTe alloying significantly enlarges the energy band gap of PbTe and subsequent Ga doping introduces special midgap states that lead to an increased density of states (DOS) effective mass and enhanced Seebeck coefficients. Moreover, the nucleated Ga 2 Te 3 nanoscale precipitates and off-center discordant Ge atoms in the PbTe matrix cause intense phonon scattering, strongly reducing the thermal conductivity (~0.65 W m -1 K -1 at 623 K). As a result, a high room-temperature thermoelectric figure of merit ZT ~ 0.59 and a peak ZT max of ~1.47 at 673 K were obtained for the Pb 0.98 Ga 0.02 Te-5%GeTe. The ZT avg value that is most relevant for devices is ~1.27 from 400 to 773 K, the highest recorded value for n-type PbTe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗