Search NASA⌕ Search

Engineering topics

Wolverton, Christopher

Publications and source records attributed to Wolverton, Christopher.

At least 73 records · Page 4

Electronic Structure and Phase Stability of Yb-filled CoSb 3 Skutterudite Thermoelectrics from First Principles

Filling the large voids in the crystal structure of the skutterudite CoSb$_3$ with rattler atoms $R$ provides an avenue for both increasing carrier concentration and disrupting lattice heat transport, leading to impressive thermoelectric performance. While the influence of $R$ on the lattice dynamics of skutterudite materials has been well studied, the phase stability of $R$-filled skutterudite materials and the influence of the presence and ordering of $R$ on the electronic structure remain unclear. Here, focusing on the Yb-filled skutterudite Yb$_x$Co$_4$Sb$_{12}$, we employ first-principles methods to compute the phase stability and electronic structure. Yb-filled CoSb$_3$ exhibits (1) a mild tendency for phase separation into Yb-rich and Yb-poor regions and (2) a strong tendency for chemical decomposition into Co--Sb and Yb--Sb binaries (i.e., CoSb$_3$, CoSb$_2$, and YbSb$_2$). We find that, at reasonable synthesis temperatures, configurational entropy stabilizes single-phase solid solutions with limited Yb solubility, in agreement with experiments. Filling CoSb$_3$ with Yb increases the band gap, enhances the carrier effective masses, and generates new low-energy ``emergent'' conduction band minima, which is distinct from the traditional band convergence picture of aligning the energies of existing band extrema. The explicit presence of $R$ is necessary to achieve the emergent conduction band minima, though the rattler ordering does not strongly influence the electronic structure. The emergent conduction bands are spatially localized in the Yb-rich regions, unlike the delocalized electronic states at the Brillouin zone center that form the unfilled skutterudite band edges.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultralow Thermal Conductivity and High-Temperature Thermoelectric Performance in n-Type K 2.5 Bi 8.5 Se 14

We studied the narrow band-gap (0.55 eV) semiconductor K 2.5 Bi 8.5 Se 14 as a potential thermoelectric material for power generation. Samples of polycrystalline K 2.5 Bi 8.5 Se 14 prepared by spark plasma sintering exhibit exceptionally low lattice thermal conductivities (κ lat ) of 0.57-0.33 W m -1 K -1 in the temperature range of 300-873 K. The physical origin of such low κ lat in K 2.5 Bi 8.5 Se 14 is related to the strong anharmonicity and low phonon velocity caused by its complex low symmetry, large unit cell crystal structure, and mixed occupancy of Bi and K atoms in the lattice. High-resolution scanning transmission electron microscopy studies and microanalysis indicate that the K 2.5 Bi 8.5 Se 14 sample is a single phase without intergrowth of the structurally related K 2 Bi 8 Se 13 phase. The undoped material exhibits an n-type character and a figure-of-merit (ZT) value of 0.67 at 873 K. Electronic band structure calculations indicate that K 2.5 Bi 8.5 Se 14 is an indirect band-gap semiconductor with multiple conduction bands close to the Fermi level. Phonon dispersion calculations suggest that K 2.5 Bi 8.5 Se 14 has low phonon velocities and large Grüneisen parameters that can account for the observed ultralow κ lat . The degree of n-type doping can be controlled by introducing Se deficiencies in the structure, providing a simple route to increase the ZT to ~1 at 873 K.

36 MATERIALS SCIENCE↗

Origin of Intrinsically Low Thermal Conductivity in Talnakhite Cu 17.6 Fe 17.6 S 32 Thermoelectric Material: Correlations between Lattice Dynamics and Thermal Transport

Understanding the nature of phonon transport in solids and the underlying mechanism linking lattice dynamics and thermal conductivity is important in many fields, including the development of efficient thermoelectric materials where a low lattice thermal conductivity is required. Herein, we choose the pair of synthetic chalcopyrite CuFeS 2 and talnakhite Cu 17.6 Fe 17.6 S 32 compounds, which possess the same elements and very similar crystal structures but very different phonon transport, as contrasting examples to study the influence of lattice dynamics and chemical bonding on the thermal transport properties. Chemically, talnakhite derives from chalcopyrite by inserting extra Cu and Fe atoms in the chalcopyrite lattice. The CuFeS 2 compound has a lattice thermal conductivity of 2.37 W m -1 K -1 at 625 K, while Cu 17.6 Fe 17.6 S 32 features Cu/Fe disorder and possesses an extremely low lattice thermal conductivity of merely 0.6 W m -1 K -1 at 625 K, approaching the amorphous limit κmin. Low-temperature heat capacity measurements and phonon calculations point to a large anharmonicity and low Debye temperature in Cu 17.6 Fe 17.6 S 32 , originating from weaker chemical bonds. Moreover, Mössbauer spectroscopy suggests that the state of Fe atoms in Cu 17.6 Fe 17.6 S 32 is partially disordered, which induces the enhanced alloy scattering. All of the above peculiar features, absent in CuFeS 2 , contribute to the extremely low lattice thermal conductivity of the Cu 17.6 Fe 17.6 S 32 compound.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase Identification of the Layered Perovskite Ce x Sr 2– x MnO 4 and Application for Solar Thermochemical Water Splitting

Ruddlesden–Popper (layered perovskite) phases are attracting significant interest because of their unique potential for many applications requiring mixed ionic and electronic conductivity. Here we report a new, previously undiscovered layered perovskite of composition, Ce x Sr 2– x MnO 4 ( x = 0.1, 0.2, and 0.3). Furthermore, we demonstrate that this new system is suitable for solar thermochemical hydrogen production (STCH). Synchrotron radiation X-ray diffraction and transmission electron microscopy are performed to characterize this new system. Density functional theory calculations of phase stability and oxygen vacancy formation energy (1.76, 2.24, and 2.66 eV/O atom, respectively with increasing Ce content) reinforce the potential of this phase for STCH application. Experimental hydrogen production results show that this materials system produces 2–3 times more hydrogen than the benchmark STCH oxide ceria at a reduction temperature of 1400 °C and an oxidation temperature of 1000 °C.

36 MATERIALS SCIENCE↗

Computational strategies for design and discovery of nanostructured thermoelectrics

Abstract The contribution of theoretical calculations and predictions in the development of advanced high-performance thermoelectrics has been increasingly significant and has successfully guided experiments to understand as well as achieve record-breaking results. In this review, recent developments in high-performance nanostructured bulk thermoelectric materials are discussed from the viewpoint of theoretical calculations. An effective emerging strategy for boosting thermoelectric performance involves minimizing electron scattering while maximizing heat-carrying phonon scattering on many length scales. We present several important strategies and key examples that highlight the contributions of first-principles-based calculations in revealing the intricate but tractable relationships for this synergistic optimization of thermoelectric performance. The integrated optimization approach results in a fourfold design strategy for improved materials: (1) a significant reduction of the lattice thermal conductivity through multiscale hierarchical architecturing, (2) a large enhancement of the Seebeck coefficient through intramatrix electronic band convergence engineering, (3) control of the carrier mobility through band alignment between the host and second phases, and (4) design of intrinsically low-thermal-conductivity materials by maximizing vibrational anharmonicity and acoustic-mode Gruneisen parameters. These combined effects serve to enhance the power factor while reducing the lattice thermal conductivity. This review provides an improved understanding of how theory is impacting the current state of this field and helps to guide the future search for high-performance thermoelectric materials.

36 MATERIALS SCIENCE↗

A Natural 2D Heterostructure [Pb 3.1 Sb 0.9 S 4 ][Au x Te 2– x ] with Large Transverse Nonsaturating Negative Magnetoresistance and High Electron Mobility

We report the two-dimensional (2D) natural hetero-structure [Pb 3.1 Sb 0.9 S 4 ][Au$_x$Te$_{2-x}$] ($x$ = 0.52-0.36) which shows anomalous, transverse nonsaturating negative magnetoresistance (MR). For $x$ = 0.52, the material has a commensurately modulated structure with alternating [Pb3.1Sb0.9S4] rocksalt layers and atomically thin [Au$_x$Te$_{2-x}$] sheets, as determined by single-crystal X-ray diffraction using a (3 + 1)-dimensional space group; for other $x$ compositions, the modulated structure is absent and the Au and Te atoms are disordered. The transport properties in this system at low temperature (<100 K) are dominated by an unusual 2D hopping mechanism, while at room temperature a high carrier mobility of similar to ~1352 cm 2 V -1 s -1 obtained ($x$ = 0.36). The confined electrons within the [Au$_x$Te$_{2-x}$] layers are also exposed to interlayer coupling with the insulating [Pb 3.1 Sb 0.9 S 4 ] layers, and as a result, the properties of the heterostructures emerge not only from the constituent layers but also the interactions between them. Furthermore, the various Au and Te coordination patterns found in the [Au$_x$Te$_{2-x}$] sheets as a function of $x$ further contribute to a unique electronic structure that leads to the anomalous nonsaturating negative MR with different field dependent behaviors. First-principles calculations indicate that the [Au$_x$Te$_{2-x}$] sheets are responsible for the unusual electrical transport properties in this 2D system.

2D materials↗

Six Quaternary Chalcogenides of the Pavonite Homologous Series with Ultralow Lattice Thermal Conductivity

Six new quaternary chalcogenides belonging to the pavonite sulfosalt mineral family with the general formula M n+1 (Bi/ Sb) 2 Q n+5 (n = 2-7) were synthesized by direct reactions of the elements at high temperatures. The compounds include InPbBi 3 S 7 (n = 2), In 0.5 Mn 2 Bi 3.5 Se 8 (n = 3), CdPb 2 Bi 4 S 9 (n = 4), Ag 1.5 CdBi 5.5 Se 10 (n = 5), Ag 2 CdBi 6 Se 11 (n = 6), and Ag 2.5 CdSb 6.5 Se 12 (n = 7) and crystallized in the monoclinic space group C2/m. The pavonite structure consists of two alternating slabs, a thinner slab composed of pairs of monocapped trigonal prisms separated by octahedra and a thicker slab with a galena-like structure motif. In the general formula, n corresponds to the number of octahedra along the diagonal direction of the galena-like slab. The complex compositions, mixed occupancies of the cations, and quasi-two-dimensional structures endow compounds of this family with extremely low thermal conductivity. Here, the charge and thermal transport properties of CdPb 2 Bi 4 S 9 and CdAg 2 Bi 6 Se 11 were characterized from 300 to 810 K, and both materials exhibited n-type semiconductor behaviors and ultralow lattice thermal conductivities of less than 0.35 W·m –1 ·K –1 for CdAg 2 Bi 6 Se 11 and 0.73 W·m –1 ·K –1 for CdPb 2 Bi 4 S 9 in the measured temperature range. Density functional theory calculations revealed the origins of this low lattice thermal conductivity to be a combination of the low Debye temperature, small phonon velocities, and large Grüneisen parameters. Thermoelectric properties were measured, and the highest ZT values of 0.53 and 0.95 for undoped CdPb 2 Bi 4 S 9 and CdAg 2 Bi 6 Se 11 , respectively, were attained at 775 K.

36 MATERIALS SCIENCE↗

Probing Electrochemically Induced Structural Evolution and Oxygen Redox Reactions in Layered Lithium Iridate

In order to exploit electrochemical capacity beyond the traditionally-utilized transition metal redox reactions in lithium-metal-oxide cathode materials, it is necessary to understand the role that oxygen ions play in the charge compensation mech-anisms, i.e., to know the conditions triggering electron transfer on the oxygen ions and whether this transfer is correlated with battery capacity. Theoretical and experimental investigations of a model cathode material, Li-rich layered Li 2 IrO 3 , have been performed to study the structural and electronic changes induced by electrochemical delithiation in a lithium-ion cell. First-principles density functional theory (DFT) calculations were used to compute the voltage profile of a Li/Li 2-x IrO 3 cell at various states of charge, and the results were in good agreement with electrochemical data. Electron energy loss spectroscopy (EELS), X-ray absorption near-edge spectroscopy (XANES), resonant/non-resonant X-ray emission spectroscopy (XES), and first principles core-level spectra simulations using the Bethe Salpeter Equation (BSE) approach were used to probe the change in oxygen electronic states over the $x$ = 0 to 1.5 range. The correlated Ir M 3 -edge XANES and O K-edge XANES data provided evidence that oxygen hole states form during the early stage of delithiation at ~3.5 V due to the interaction between O $p$ and Ir $d$ states, with Ir oxidation being the dominant source of electrochemical capacity. At higher potentials, the charge capacity was predominantly attributed to oxidation of the O 2- ions. It is argued that the emergence of oxygen holes alone is not necessarily indicative of electrochemical capacity beyond transition metal oxidation, since oxygen hole states can appear as a result of enhanced mixing of O $p$ and Ir $d$ states. Prevailing mechanisms accounting for the oxygen redox mechanism in Li-rich materials were examined by theoretical and experimental X-ray spectroscopy; however, no unambiguous spectroscopic signatures of oxygen dimer interaction or non-bonding oxygen states were identified.

25 ENERGY STORAGE↗

All-Scale Hierarchically Structured p-Type PbSe Alloys with High Thermoelectric Performance Enabled by Improved Band Degeneracy

We show an example of hierarchically designing electronic bands of PbSe toward excellent thermoelectric performance. We find that alloying 15 mol % PbTe into PbSe causes a negligible change in the light and heavy valence band energy offsets (ΔE V ) of PbSe around room temperature; however, with rising temperature it makes ΔE V decrease at a significantly higher rate than in PbSe. In other words, the temperature-induced valence band convergence of PbSe is accelerated by alloying with PbTe. On this basis, applying 3 mol % Cd substitution on the Pb sites of PbSe 0.85 Te 0.15 decreases ΔE V and enhances the Seebeck coefficient at all temperatures. Here, excess Cd precipitates out as CdSe 1-y Te y , whose valence band aligns with that of the p-type Na-doped PbSe 0.85 Te 0.15 matrix. This enables facile charge transport across the matrix/precipitate interfaces and retains the high carrier mobilities. Meanwhile, compared to PbSe the lattice thermal conductivity of PbSe 0.85 Te 0.15 is significantly decreased to its amorphous limit of 0.5 W m -1 K -1 . Consequently, a highest peak ZT of 1.7 at 900 K and a record high average ZT of ~1 (400-900 K) for a PbSe-based system are achieved in the composition Pb 0.95 Na 0.02 Cd 0.03 Se 0.85 Te 0.15 , which are ~70% and ~50% higher than those of Pb 0.98 Na 0.02 Se control sample, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective Transfer of Rotationally Commensurate MoS 2 from an Epitaxially Grown van der Waals Heterostructure

We report that large-scale synthesis of high-quality two-dimensional (2D) semiconductors is critical for their incorporation in emerging electronic and optoelectronic technologies. In particular, chemical vapor deposition (CVD) of transition-metal dichalcogenides (TMDs) via van der Waals epitaxy on epitaxial graphene (EG) leads to rotationally commensurate TMDs in contrast to randomly aligned TMDs grown on amorphous oxide substrates. However, the interlayer coupling between TMDs and EG hinders the investigation and utilization of the intrinsic electronic properties of the resulting TMDs, thus requiring their isolation from the EG growth substrate. To address this issue, we report here a technique for selectively transferring monolayer molybdenum disulfide (MoS 2 ) from CVD-grown MoS 2 -EG van der Waals heterojunctions using copper (Cu) adhesion layers. The choice of Cu as the adhesion layer is motivated by density functional theory calculations that predict the preferential binding of monolayer MoS 2 to Cu in contrast to graphene. Atomic force microscopy and optical spectroscopy confirm the large-scale transfer of rotationally commensurate MoS 2 onto SiO 2 /Si substrates without cracks, wrinkles, or residues. Furthermore, the transferred MoS 2 shows high performance in field-effect transistors with mobilities of up to 30 cm 2 /V s and on/off ratios of up to 10 6 at room temperature. Lastly, this transfer technique can likely be generalized to other TMDs and related 2D materials grown on EG, thus offering a broad range of benefits in nanoelectronic, optoelectronic, and photonic applications.

36 MATERIALS SCIENCE↗

Accelerated discovery of metallic glasses through iteration of machine learning and high-throughput experiments

With more than a hundred elements in the periodic table, a large number of potential new materials exist to address the technological and societal challenges we face today; however, without some guidance, searching through this vast combinatorial space is frustratingly slow and expensive, especially for materials strongly influenced by processing. We train a machine learning (ML) model on previously reported observations, parameters from physiochemical theories, and make it synthesis method–dependent to guide high-throughput (HiTp) experiments to find a new system of metallic glasses in the Co-V-Zr ternary. Experimental observations are in good agreement with the predictions of the model, but there are quantitative discrepancies in the precise compositions predicted. We use these discrepancies to retrain the ML model. The refined model has significantly improved accuracy not only for the Co-V-Zr system but also across all other available validation data. We then use the refined model to guide the discovery of metallic glasses in two additional previously unreported ternaries. Although our approach of iterative use of ML and HiTp experiments has guided us to rapid discovery of three new glass-forming systems, it has also provided us with a quantitatively accurate, synthesis method–sensitive predictor for metallic glasses that improves performance with use and thus promises to greatly accelerate discovery of many new metallic glasses. We believe that this discovery paradigm is applicable to a wider range of materials and should prove equally powerful for other materials and properties that are synthesis path–dependent and that current physiochemical theories find challenging to predict.

36 MATERIALS SCIENCE↗

Efficient Discovery of Novel Multicomponent Mixtures for Hydrogen Storage: A Combined Computational/Experimental Approach

The objective of the proposed program is to discover novel mixed hydrides for hydrogen storage, which enable the DOE 2010 system-level goals. Our goal is to find a material that desorbs 8.5 wt.% H 2 or more at temperatures below 85°C. The research program will combine first-principles calculations of reaction thermodynamics and kinetics with material and catalyst synthesis, testing, and characterization. We will combine materials from distinct categories (e.g., chemical and complex hydrides) to form novel multicomponent reactions. Systems to be studied include mixtures of complex hydrides and chemical hydrides [e.g. LiNH 2+ NH 3 BH 3 ] and nitrogen-hydrogen based borohydrides [e.g. Al(BH 4 ) 3 (NH 3 ) 3 ]. The 2010 and 2015 FreedomCAR/DOE targets for hydrogen storage systems are very challenging, and cannot be met with existing materials. The vast majority of the work to date has delineated materials into various classes, e.g., complex and metal hydrides, chemical hydrides, and sorbents. However, very recent studies indicate that mixtures of storage materials, particularly mixtures between various classes, hold promise to achieve technological attributes that materials within an individual class cannot reach. Our project involves a systematic, rational approach to designing novel multicomponent mixtures of materials with fast hydrogenation/dehydrogenation kinetics and favorable thermodynamics using a combination of state-of-the-art scientific computing and experimentation. We will use the accurate predictive power of first-principles modeling to understand the thermodynamic and microscopic kinetic processes involved in hydrogen release and uptake and to design new material/catalyst systems with improved properties. Detailed characterization and atomic-scale catalysis experiments will elucidate the effect of dopants and nanoscale catalysts in achieving fast kinetics and reversibility. And, state-of-the-art storage experiments will give key storage attributes of the investigated reactions, validate computational predictions, and help guide and improve computational methods. In sum, our approach involves a powerful blend of: 1) H2 Storage measurements and characterization, 2) State-of-the-art computational modeling, 3) Detailed catalysis experiments, 4) In-depth automotive perspective.

08 HYDROGEN↗

Revisiting the revised Ag-Pt phase diagram

Because of the important applications of platinum alloys and related platinum-group-metals phases, complete phase diagrams for these systems are important for materials engineering. The currently accepted phase diagram for the Ag-Pt system is questionable because of its disagreement with earlier experiments and because of its claim for a lone ordered structure at 53%-Pt which was not characterized and which contradicts both computational predictions and analogy to the isoelectronic system Cu-Pt. A complete re-examination of the Ag-Pt system by computational and experimental means suggests a phase diagram similar to the isoelectronic system Cu-Pt. The unknown compound, claimed to be 53%-Pt, is found to be the L1 1 structure at 50%-Pt.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exploring Lithium-Cobalt-Nickel Oxide Spinel Electrodes for ≥3.5 V Li-Ion Cells

Recent reports have indicated that a manganese oxide spinel component, when embedded in a relatively small concentration in layered xLi2MnO3(1-x)LiMO2 (M=Ni, Mn, Co) electrode systems, can act as a stabilizer that increases their capacity, rate capability, cycle life, and first-cycle efficiency. These findings prompted us to explore the possibility of exploiting lithiated cobalt oxide spinel stabilizers by taking advantage of (1) the low mobility of cobalt ions relative to manganese and nickel ions in close-packed oxides and (2) their higher potential (~3.6 V vs. Li0) relative to manganese oxide spinels (~2.9 V vs. Li0) for the spinel-to-lithiated spinel electrochemical reaction. In particular, we have revisited the structural and electrochemical properties of lithiated spinels in the LiCo1-xNixO2 (0x0.2) system, first reported almost 25 years ago, by means of high-resolution (synchrotron) X-ray diffraction, transmission electron microscopy, nuclear magnetic resonance spectroscopy, electrochemical cell tests, and theoretical calculations. The results provide a deeper understanding of the complexity of intergrown layered/lithiated spinel LiCo1-xNixO2 structures, when prepared in air between 400 and 800 C, and the impact of structural variations on their electrochemical behavior. These structures, when used in low concentration, offer the possibility of improving the cycling stability, energy, and power of high energy (≥3.5 V) lithium-ion cells.

Environmental Molecular Sciences Laboratory↗

Research update: Prediction of high figure of merit plateau in SnS and solid solution of (Pb,Sn)S

Direct conversion between thermal and electrical energy can be achieved by thermoelectric materials, which provide a viable route for power generation and solid state refrigeration. Here, we use a combination of energetic, electronic, and vibrational first-principles based results to predict the figure of merit performance in hole doped single crystals of SnS and (Pb,Sn)S. We find high ZT values for both materials, specifically for (Pb,Sn)S along the b -axis. Both SnS and (Pb,Sn)S have excellent power factors when doped, due to a combination of increased electrical conductivity (due to doping) and a significantly enhanced Seebeck coefficient obtained by a doping-induced multiband effect. Anharmonic phonon calculations combined with a Debye-Calloway model show that the lattice thermal conductivity of both compounds is low, due to intrinsic anharmonicity, and is lowered further by the random, solid solution nature of the cation sublattice of (Pb,Sn)S. (Pb,Sn)S exhibits a high ZT plateau ranging from 1.3 at 300 K to 1.9 at 800 K. Finally, the overall ZT of the hole doped (Pb,Sn)S crystals is predicted to outperform most of the current state-of-the-art thermoelectric sulfide materials.

36 MATERIALS SCIENCE↗