Search NASA⌕ Search

Engineering topics

Wolverton, Christopher

Publications and source records attributed to Wolverton, Christopher.

At least 91 records · Page 5

High Efficiency Solar Thermochemical Reactor for Hydrogen Production

Overall objectives of the project were: Verify the potential for solar thermochemical cycles for hydrogen production to be competitive in the long term and by 2020, develop this technology to produce hydrogen with a projected cost of $3.00/gge at the plant gate; and, Develop a high-efficiency particle bed reactor for producing hydrogen via a thermochemical water-splitting (WS) cycle, and demonstrate eight continuous hours of operation on a solar simulator producing greater than 3 L of H 2 .

08 HYDROGEN↗

A general-purpose machine learning framework for predicting properties of inorganic materials

A very active area of materials research is to devise methods that use machine learning to automatically extract predictive models from existing materials data. While prior examples have demonstrated successful models for some applications, many more applications exist where machine learning can make a strong impact. To enable faster development of machine-learning-based models for such applications, we have created a framework capable of being applied to a broad range of materials data. Our method works by using a chemically diverse list of attributes, which we demonstrate are suitable for describing a wide variety of properties, and a novel method for partitioning the data set into groups of similar materials to boost the predictive accuracy. In this manuscript, we demonstrate how this new method can be used to predict diverse properties of crystalline and amorphous materials, such as band gap energy and glass-forming ability.

36 MATERIALS SCIENCE↗

Concerted Rattling in CsAg 5 Te 3 Leading to Ultralow Thermal Conductivity and High Thermoelectric Performance

Abstract Thermoelectric (TE) materials convert heat energy directly into electricity, and introducing new materials with high conversion efficiency is a great challenge because of the rare combination of interdependent electrical and thermal transport properties required to be present in a single material. The TE efficiency is defined by the figure of merit ZT =( S 2 σ ) T / κ , where S is the Seebeck coefficient, σ is the electrical conductivity, κ is the total thermal conductivity, and T is the absolute temperature. A new p‐type thermoelectric material, CsAg 5 Te 3 , is presented that exhibits ultralow lattice thermal conductivity (ca. 0.18 Wm −1 K −1 ) and a high figure of merit of about 1.5 at 727 K. The lattice thermal conductivity is the lowest among state‐of‐the‐art thermoelectrics; it is attributed to a previously unrecognized phonon scattering mechanism that involves the concerted rattling of a group of Ag ions that strongly raises the Grüneisen parameters of the material.

Lin, Hua↗

Concerted Rattling in CsAg 5 Te 3 Leading to Ultralow Thermal Conductivity and High Thermoelectric Performance

Abstract Thermoelectric (TE) materials convert heat energy directly into electricity, and introducing new materials with high conversion efficiency is a great challenge because of the rare combination of interdependent electrical and thermal transport properties required to be present in a single material. The TE efficiency is defined by the figure of merit ZT =( S 2 σ ) T / κ , where S is the Seebeck coefficient, σ is the electrical conductivity, κ is the total thermal conductivity, and T is the absolute temperature. A new p‐type thermoelectric material, CsAg 5 Te 3 , is presented that exhibits ultralow lattice thermal conductivity (ca. 0.18 Wm −1 K −1 ) and a high figure of merit of about 1.5 at 727 K. The lattice thermal conductivity is the lowest among state‐of‐the‐art thermoelectrics; it is attributed to a previously unrecognized phonon scattering mechanism that involves the concerted rattling of a group of Ag ions that strongly raises the Grüneisen parameters of the material.

Lin, Hua↗

Quaternary phase diagrams of spinel Li$_y\square_{1–y}$Mn$_x$Ni$_{2–x}$O$_4$ and composite cathode voltages for concentration gradient materials

Core-shell coating structures and concentration gradient materials may enhance Li-ion battery performance by integrating advantages of core and shell components without introducing unfavorable problems associated with general coatings. The fundamental thermodynamic properties of concentration gradient composite materials are complex due to the multicomponent nature of the problem. Here, we systematically study the thermodynamics of ordering and phase separation in the quaternary spinel Li$_y\square_{1–y}$Mn$_x$Ni$_{2–x}$O$_4$ ($\square$ means vacancy) system by density functional theory calculations, together with the coupled cluster expansion method with interactions within and between (Li/$\square$) and (Mn/Ni) sublattices. On the basis of coupled cluster expansion interactions and Monte Carlo simulations, we calculate quaternary phase diagrams as a function of temperature as well as voltage profiles of single ordered phases and multiphase composite structures. The phase diagram and voltage results are in good agreement with available experimental observations. We also predict a stable high-voltage ordered compound LiMnNiO 4 , with a very high delithiation voltage of 4.76 V. For the composite (Mn-rich + Ni-rich) cathode materials, the voltage profiles show combinations of plateaus from each component compound. The computational strategy of combining quaternary phase diagrams with voltage calculations provides a pathway to understand and design concentration gradient materials.

36 MATERIALS SCIENCE↗

Designing Nanoscale Precipitates in Novel Cobalt-based Superalloys to Improve Creep Resistance and Operating Temperature

High-temperature structural alloys for aerospace and energy applications have long been dominated by Ni-base superalloys, whose strength and creep resistance can be attributed to microstructures consisting of a large volume fraction of ordered (L1 2 ) γ'-precipitates embedded in a disordered’(f.c.c.) γ-matrix. These alloys exhibit excellent mechanical behavior and thermal stability, but after decades of incremental improvement are nearing the theoretical limit of their operating temperatures. Conventional Co-base superalloys are solid-solution or carbide strengthened; although they see industrial use, these alloys are restricted to lower-stress applications because the absence of an ordered intermetallic phase places an upper limit on their mechanical performance. In 2006, a γ+γ' microstructure with ordered precipitates analogous to (L1 2 ) Ni 3 Al was first identified in the Co-Al-W ternary system, allowing, for the first time, the development of Co-base alloys with the potential to meet or even exceed the elevated-temperature performance of their Ni-base counterparts. The potential design space for these alloys is complex: the most advanced Ni-base superalloys may contain as many as 8-10 minor alloying additions, each with a specified purpose such as raising the γ' solvus temperature or improving creep strength. Our work has focused on assessing the effects of alloying additions on microstructure and mechanical behavior of γ'-strengthened Co-base alloys in an effort to lay the foundations for understanding this emerging alloy system. Investigation of the size, morphology, and composition of γ' and other relevant phases is investigated utilizing scanning electron microscopy (SEM) and 3-D picosecond ultraviolet local electrode atom probe tomography (APT). Microhardness, compressive yield stress at ambient and elevated temperatures, and compressive high-temperature creep measurements are employed to extract mechanical behavior. First-principle calculations have been employed to predict the stability of Co 3 (Al 0.5 ,W 0.5 ) as well as to estimate important physical parameters, such as the anti-phase boundary (APB) energy, in this system. Additionally, 2D dislocation dynamics modeling has been employed to predict the effect of γ' precipitate size and volume fraction on the critical resolved shear stress of model Ni-base superalloy systems (for which experimental data are readily available in the archival literature) as well as for the case of model Co-base superalloys. Investigations of the ternary Co-Al-W system were carried out to establish baseline values for the composition, size, morphology, and volume fraction of the strengthening γ' precipitates with respect to aging time and temperature. The addition of grain-boundary strengtheners B and Zr were investigated and found to improve creep strength compared to ternary Co-Al-W, which suffers from brittle grain boundaries. Incorporation of Ni to extend the γ+γ' two-phase field coupled with systematic replacement of Ti for Al and W was shown to raise the γ' volume fraction and solvus temperature, while reducing the bulk alloy density by enabling a reduction in W content. Ti additions also promoted dramatic improvements in both room temperature flow stress as well as the magnitude of the anomalous flow behavior leading to substantial strength increases in the range 650 – 800 °C.

36 MATERIALS SCIENCE↗