Search NASA⌕ Search

Engineering topics

Woods-Robinson, Rachel

Publications and source records attributed to Woods-Robinson, Rachel.

At least 19 records

Stability and synthesis across barium tin sulfide material space

The underexplored Ba–Sn–S phase space is explored at various temperatures and cation ratios with combinatorial sputtering, crystallizing rocksalt-derived phases, Ba 2 SnS 4 , and Ba 7 Sn 5 S 15 . These findings are supported by DFT computed phase diagrams.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Designing transparent conductors using forbidden optical transitions

Many semiconductors present weak or forbidden transitions at their fundamental band gaps, inducing a widened region of transparency. This occurs in high-performing n-type transparent conductors (TCs) such as Sn-doped In 2 O 3 (ITO); however, thus far, the presence of forbidden transitions has been neglected in the search for new p-type TCs. To address this, we first compute high-throughput absorption spectra across ~18, 000 semiconductors, showing that over half exhibit forbidden or weak optical transitions at their band edges. Next, we demonstrate that compounds with highly localized band-edge states are more likely to present forbidden transitions. Lastly, we search this set for p-type and n-type TCs with forbidden transitions and, by performing defect calculations, propose unexplored TC candidates such as ambipolar BeSiP 2 , p-type wurtzite BAs, and n-type Ba 2 InGaO 5 , among others. In conclusion, we share our dataset and recommend that future screenings for optical properties consider the impact of forbidden transitions.

36 MATERIALS SCIENCE↗

Forbidden Transitions

High-throughput computed optical and electronic properties across a set of ~18,000 semiconductors.

36 MATERIALS SCIENCE↗

Ternary Nitride Materials: Fundamentals and Emerging Device Applications

Interest in inorganic ternary nitride materials has grown rapidly over the past few decades, as their diverse chemistries and structures make them appealing for a variety of applications. Due to synthetic challenges posed by the stability of N 2 , the number of predicted nitride compounds dwarfs the number that have been synthesized, offering a breadth of opportunity for exploration. This review summarizes the fundamental properties and structural chemistry of ternary nitrides, leveraging metastability and the impact of nitrogen chemical potential. A discussion of prevalent defects, both detrimental and beneficial, is followed by a survey of synthesis techniques and their interplay with metastability. Throughout the review, we highlight applications (such as solid-state lighting, electrochemical energy storage, and electronic devices) in which ternary nitrides show particular promise.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient calculation of carrier scattering rates from first principles

Abstract The electronic transport behaviour of materials determines their suitability for technological applications. We develop a computationally efficient method for calculating carrier scattering rates of solid-state semiconductors and insulators from first principles inputs. The present method extends existing polar and non-polar electron-phonon coupling, ionized impurity, and piezoelectric scattering mechanisms formulated for isotropic band structures to support highly anisotropic materials. We test the formalism by calculating the electronic transport properties of 23 semiconductors, including the large 48 atom CH 3 NH 3 PbI 3 hybrid perovskite, and comparing the results against experimental measurements and more detailed scattering simulations. The Spearman rank coefficient of mobility against experiment ( r s = 0.93) improves significantly on results obtained using a constant relaxation time approximation ( r s = 0.52). We find our approach offers similar accuracy to state-of-the art methods at approximately 1/500th the computational cost, thus enabling its use in high-throughput computational workflows for the accurate screening of carrier mobilities, lifetimes, and thermoelectric power.

97 MATHEMATICS AND COMPUTING↗

Evaluating Materials Design Parameters of Hole-Selective Contacts for Silicon Heterojunction Solar Cells

Silicon heterojunction (SHJ) solar cell efficiencies are limited by parasitic absorption from the hydrogenated amorphous silicon (a-Si:H) front contact, but this may be mitigated by selecting an alternative carrier selective contact material with a wider band gap. When choosing such a material as the hole-selective contact (“p-layer”), the alignment of the material's valence band edge energy (E VB ) with that of crystalline silicon (c-Si) is an important criterion, but several other material parameters can also influence the band bending at the contact interface. Here, we simulate an (n)c-Si/(i)a-Si:H/p-layer interface to explore the influence of six materials parameters in a variable p-layer on the SHJ performance. We find a strong influence on the fill factor (FF) from thickness, doping, and E VB , and on V OC from the interfacial defect density; notably, optimal E VB is ~ 0.1 eV higher than the valence band edge energy of a-Si:H. Multiparameter sensitivity analyses demonstrate how performance is simultaneously influenced by E VB and doping; thus, both parameters should be optimized alongside one another. To assess the influence of these parameters experimentally, we grow p-type NiO x as a test-case p-layer, which shows that FFs decrease with the oxygen content likely from the increased misalignment of E VB . Although modest efficiencies are achieved experimentally (>7%), what is important is that our model simulates performance trends. With these results, we apply a materials discovery pipeline to suggest new materials (e.g., ZnTe and BeTe) to try as p-layers in the SHJ. This combination of simulations, experiments, and materials discovery informs a better understanding of contact selection in SHJ cells.

14 SOLAR ENERGY↗

Combinatorial investigation of structural and optical properties of cation-disordered ZnGeN 2

Cation-disordered ZnGeN 2 shows promise for application as a blue-green emitter in light-emitting devices, but more foundational work is necessary to understand structure–property relationships. In this work, we present a combinatorial exploration of the experimental phase space of wurtzite (cation-disordered) ZnGeN 2 using high-throughput co-sputtering. Structure, morphology and optical properties are explored as a function of cation composition and synthesis temperature. ZnGeN 2 is found to crystallize in the wurtzite structure ranging from Zn-rich to Ge-rich compositions. X-ray diffraction refinements reveal a continuous shift in cell volume with off-stoichiometry, indicating alloy-like structural behavior. Furthermore, the optical absorption of all films examined is lower in energy than the value predicted for cation-ordered ZnGeN 2 , suggesting that cation disorder is decreasing the bandgap. Additionally, the absorption threshold shifts continuously to higher energy for Ge-rich samples, consistent with bandgap shifts due to alloy-like structural behavior. Defect formation energy diagrams are calculated to help guide understanding of off-stoichiometry from a defect complex perspective. This work paves the way toward use of ZnGeN 2 as a bandgap-tunable optoelectronic semiconductor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sputtered p-Type Cu x Zn 1– x S Back Contact to CdTe Solar Cells

As thin-film cadmium telluride (CdTe) solar cells gain prominence, one particular challenge is optimizing contacts and their interfaces to transfer charge without losses in efficiency. Back contact recombination is still significant and will prevent CdTe solar technology from reaching its full potential in device efficiency, and transparent back contacts have not been developed for bifacial solar technology or multijunction solar cells. To address these challenges, here we investigate sputtered Cu x Zn 1– x S as a p-type semi-transparent back contact material to thin-film polycrystalline CdTe solar cells at Cu concentrations x = 0.30, 0.45, and 0.60. This material is selected for its high hole conductivity (160–2120 S cm –1 ), wide optical band gap (2.25–2.75 eV), and variable ionization potential (approximately 6–7 eV) that can be aligned to that of CdTe. We report that without device optimization, CdTe solar cells with these Cu x Zn 1– x S back contacts perform as well as control cells with standard ZnTe:Cu back contacts. We observe no reduction in external quantum efficiency, low contact barrier heights of approximately 0.3 eV, and carrier lifetimes on par with those of baseline CdTe. These cells are relatively stable over one year in air, with V OC and efficiency of the x = 0.30 cell decreasing by only 1 and 3%, respectively. Using scanning electron microscopy and scanning transmission electron microscopy to investigate the Cu x Zn 1– x S/CdTe interface, we demonstrate that the Cu x Zn 1– x S layer segregates into a bilayer of Cu-Te-S and Zn-Cd-S, and thermodynamic reaction calculations support these findings. Despite its bilayer formation, the back contact still functions well. This investigation explains some of the physical mechanisms governing the device stack, inspires future work to understand interfacial chemistry and charge transfer, and elicits optimization to achieve higher-efficiency CdTe cells.

14 SOLAR ENERGY↗

Wide Band Gap Chalcogenide Semiconductors

Wide band gap semiconductors are essential for today’s electronic devices and energy applications because of their high optical transparency, controllable carrier concentration, and tunable electrical conductivity. The most intensively investigated wide band gap semiconductors are transparent conductive oxides (TCOs), such as tin-doped indium oxide (ITO) and amorphous In–Ga–Zn–O (IGZO), used in displays and solar cells, carbides (e.g., SiC) and nitrides (e.g., GaN) used in power electronics, and emerging halides (e.g., γ-CuI) and 2D electronic materials (e.g., graphene) used in various optoelectronic devices. Compared to these prominent materials families, chalcogen-based (Ch = S, Se, Te) wide band gap semiconductors are less heavily investigated but stand out because of their propensity for p-type doping, high mobilities, high valence band positions (i.e., low ionization potentials), and broad applications in electronic devices such as CdTe solar cells. This manuscript provides a review of wide band gap chalcogenide semiconductors. First, we outline general materials design parameters of high performing transparent semiconductors, as well as the theoretical and experimental underpinnings of the corresponding research methods. We proceed to summarize progress in wide band gap (EG > 2 eV) chalcogenide materials—namely, II–VI MCh binaries, CuMCh 2 chalcopyrites, Cu 3 MCh 4 sulvanites, mixed-anion layered CuMCh(O,F), and 2D materials—and discuss computational predictions of potential new candidates in this family, highlighting their optical and electrical properties. Then, we finally review applications—for example, photovoltaic and photoelectrochemical solar cells, transistors, and light emitting diodes—that employ wide band gap chalcogenides as either an active or passive layer. Overall, by examining, categorizing, and discussing prospective directions in wide band gap chalcogenides, this Review aims to inspire continued research on this emerging class of transparent semiconductors and thereby enable future innovations for optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ternary nitride semiconductors in the rocksalt crystal structure

Inorganic nitrides with wurtzite crystal structures are well-known semiconductors used in optical and electronic devices. In contrast, rocksalt-structured nitrides are known for their superconducting and refractory properties. Breaking this dichotomy, here we report ternary nitride semiconductors with rocksalt crystal structures, remarkable electronic properties, and the general chemical formula Mg x TM 1−x N ( TM = Ti, Zr, Hf, Nb). Our experiments show that these materials form over a broad metal composition range, and that Mg-rich compositions are nondegenerate semiconductors with visible-range optical absorption onsets (1.8 to 2.1 eV) and up to 100 cm 2 V −1 ⋅s −1 electron mobility for MgZrN 2 grown on MgO substrates. Complementary ab initio calculations reveal that these materials have disorder-tunable optical absorption, large dielectric constants, and electronic bandgaps that are relatively insensitive to disorder. These ternary Mg x TM 1−x N semiconductors are also structurally compatible both with binary TM N superconductors and main-group nitride semiconductors along certain crystallographic orientations. Overall, these results highlight Mg x TM 1−x N as a class of materials combining the semiconducting properties of main-group wurtzite nitrides and rocksalt structure of superconducting transition-metal nitrides.

36 MATERIALS SCIENCE↗

Synthesis of Lanthanum Tungsten Oxynitride Perovskite Thin Films

Ternary metal-oxide material systems commonly crystallize in the perovskite crystal structure, which is utilized in numerous electronic applications. In contrast to oxides, there are no known nitride perovskites, likely due to the competition with oxidation, which makes the formation of pure nitride materials difficult and synthesis of oxynitride materials more common. While deposition of oxynitride perovskite thin films is important for many electronic applications, it is difficult to control oxygen and nitrogen stoichiometry. Lanthanum tungsten oxynitride (LaWN3-..delta..O..delta..) thin films with varying La:W ratio are synthesized by combinatorial sputtering and characterized for their chemical composition, crystal structure, and microstructure. A three-step synthesis method, which involves co-sputtering, capping layer deposition, and rapid thermal annealing, is established for producing crystalline thin films while minimizing the oxygen content. Elemental depth profiling results show that the cation-stoichiometric films contain approximately one oxygen for every five nitrogen (..delta.. = 0.5). Synchrotron-based diffraction indicates a tetragonal perovskite crystal structure. These results are discussed in terms of the perovskite tolerance factors, octahedral tilting, and bond valence. Overall, this synthesis and characterization is expected to pave the way toward future thin film property measurements of lanthanum tungsten oxynitrides and eventual synthesis of oxygen-free nitride perovskites.

14 SOLAR ENERGY↗

Assessing High-Throughput Descriptors for Prediction of Transparent Conductors

The growth of materials databases has offered significant quantities of data to mine for new energy materials using high-throughput screening methodologies. One application of interest to energy and optoelectronics is the prediction of new high performing p-type transparent conductors (TCs). Yet, screening methods for such materials have never been validated over the breadth of computed materials properties. In this study, we compile an experimental data set of 74 bulk crystal structures corresponding to known state-of-the-art n-type and p-type TCs and compute a series of corresponding computational descriptor properties. Our goals are to (1) compare computational descriptors to experimentally demonstrated properties of real materials in the data set, (2) determine the ability of ground state, density functional theory (DFT)-based computational screening methodologies to identify these experimentally realized TCs, and (3) use this understanding to estimate reasonable screening cutoffs for four commonly used descriptors. First, stability calculations demonstrate that most materials in the data set have an energy above the convex hull ( E hull ) of <100 meV/atom, and we also propose a Pourbaix analysis technique to estimate moisture stability. Second, we find a lenient cutoff for the DFT PBE band gap of 0.5 eV is sufficient to include a majority of the wide gap candidates and exclude narrow gap compounds. Next, the effective mass, m *, is found to correlate weakly to conductivity in the p-type materials as compared with n-type materials, which may motivate an increase in the m * cutoff as well. Lastly, we perform an uncertainty analysis and literature comparison for the branch point energy (BPE), a qualitative descriptor for dopability. We discover the BPEs of most n-type materials to lie near the conduction band and those of most p-type materials to lie at midgap; this is a significant distinction, implying BPE to be a more definitive descriptor for n-type TC materials. By assessing the validity of this simple screening methodology via comparing experimental data to computational descriptors, we aim to motivate and strengthen future materials discovery efforts in the field of transparent conductors and beyond.

36 MATERIALS SCIENCE↗

High figure-of-merit p -type transparent conductor, Cu alloyed ZnS via radio frequency magnetron sputtering

p-type transparent conducting Cu alloyed ZnS thin films from Cu$_{{x}}$ Zn$_{{1-x}}$ S targets ($x = 0.1$ , 0.2, 0.3, 0.4, and 0.5) were deposited on glass substrates via radio frequency sputtering. x-ray diffraction and TEM–SAED analysis show that all the films have sphalerite ZnS as the majority crystalline phase. In addition, films with 30% and 40% Cu show the presence of increasing amounts of crystalline Cu2S phase. Conductivity values ≥400 S ${\rm cm}^{-1}$ were obtained for the films having 30% and 40% Cu, with the maximum conductivity of 752 S ${\rm cm}^{-1}$ obtained for the film with 40% Cu. Temperature dependent electrical transport measurements indicate metallic as well as degenerate hole conductivity in the deposited films. The reflection-corrected transmittance of this Cu alloyed ZnS (40% Cu) film was determined to be ≥75% at 550 nm. In conclusion, the transparent conductor figure of merit ($\Phi_{{\rm TC}}$ ) of the Cu alloyed ZnS (40% Cu), calculated with the average value of transmittance between 1.5 to 2.5 eV, was ≈276 $\mu{\rm S}$ .

36 MATERIALS SCIENCE↗

P-Type Transparent Cu-Alloyed ZnS Deposited at Room Temperature

All transparent conducting materials (TCMs) of technological practicality are n-type; the inferior conductivity of p-type TCMs has limited their adoption. Additionally, many relatively high-performing p-type TCMs require synthesis temperatures > 400 °C. Here, room-temperature pulsed laser deposition of copper-alloyed zinc sulfide (Cu x Zn 1- x S) thin films (0 ≤ x ≤ 0.75) is reported. For 0.09 ≤ x ≤ 0.35, Cu x Zn 1- x S has high p-type conductivity, up to 42 S cm -1 at x = 0.30, with an optical band gap tunable from ≈3.0–3.3 eV and transparency, averaged over the visible, of 50%–71% for 200–250 nm thick films. In this range, synchrotron X-ray and electron diffraction reveal a nanocrystalline ZnS structure. Secondary crystalline Cu y S phases are not observed, and at higher Cu concentrations, x > 0.45, films are amorphous and poorly conducting. Furthermore, within the TCM regime, the conductivity is temperature independent, indicating degenerate hole conduction. A decrease in lattice parameter with Cu content suggests that the hole conduction is due to substitutional incorporation of Cu onto Zn sites. This hole-conducting phase is embedded in a less conducting amorphous Cu y S, which dominates at higher Cu concentrations. Finally, the combination of high hole conductivity and optical transparency for the peak conductivity Cu x Zn 1- x S films is among the best reported to date for a room temperature deposited p-type TCM.

36 MATERIALS SCIENCE↗