Search NASA⌕ Search

Engineering topics

Xu, Fang

Publications and source records attributed to Xu, Fang.

26 records · Page 2

Potassium-induced effect on structure and chemical activity of Cu x O/Cu(111) (x≤2) surface: A combined scanning tunneling microscopy and density functional theory study

Potassium (K) plays an essential role in promoting catalytic reaction in many established industrial catalytic processes. Here, we report a combined study using scanning tunneling microscopy (STM) and density functional theory (DFT) in understanding the effect of depositing K on the atomic and electronic structures as well as chemical activities of Cu x O/Cu(111) (x≤2). The DFT calculations observe a pseudomorphic growth of K on Cu x O/Cu(111) up to 0.19 monolayer (ML) of coverage, where K binds the surface via strong ionic interaction with chemisorbed oxygen and the relatively weak electrostatic interactions with copper ions, lower and upper oxygen on the Cu x O rings. The simulated STM pattern based on the DFT results agrees well with the experimental observations. The deposited K displays great impact on the surface electronic structure of Cu x O/Cu(111), which induces significant reduction in work function and leads to a strong electron polarization on the surface. The promotion of K on the surface binding properties is selective. It varies depending on the nature of adsorbates. According to our results, K has little effect on surface acidity, while it enhances the surface basicity significantly. As a consequence, the presence of K does not help for CO adsorption on Cu x O/Cu(111), but being able to accelerate the activation of CO 2 . Thus, such promotion strongly depends on the combinations from both geometric and electronic effects. Our results highlight the origin of promoting effect of alkalis in the design of catalysts for the complex reactions.

30 DIRECT ENERGY CONVERSION↗

Magnesia tuned multi-walled carbon nanotubes–reinforced alumina nanocomposites

Magnesia tuned alumina ceramic nanocomposites, reinforced with multi-walled carbon nanotubes, were condensed using pressureless and hot-press sintering processes. Densification, microstructure and mechanical properties of the produced nanocomposites were meticulously investigated. Electron microscopy studies revealed the homogenous carbon nanotube dispersion within the alumina matrix and confirmed the retention of carbon nanotubes' distinctive tubular morphology and nanoscale features during the extreme mixing/sintering processes. Pressureless sintered nanocomposites showed meagre mechanical responses due to the poorly-integrated microstructures with a slight improvement upon magnesia addition. Conversely, both the magnesia addition and application of hot-press sintering technique resulted in the nanocomposite formation with near-theoretical densities (~ 99%), well-integrated microstructures and superior mechanical properties. Hot-press sintered nanocomposites incorporating 300 and 600 ppm magnesia exhibited an increase in hardness (10 and 11%), flexural strength (5 and 10%) and fracture toughness (15 and 20%) with respect to similar magnesia-free samples. Compared to monolithic alumina, a decent rise in fracture toughness (37%), flexural strength (22%) and hardness (20%) was observed in the hot-press sintered nanocomposites tuned with merely 600 ppm magnesia. Mechanically superior hot-press sintered magnesia tailored nanocomposites are attractive for several load-bearing structural applications. - Highlights: • MgO tailored Al{sub 2}O{sub 3}–2 wt.% CNT nanocomposites are presented. • The role of MgO and sintering on nanocomposite structures and properties was studied. • Well-dispersed CNTs maintained their morphology/structure after harsh sintering. • Hot-pressing and MgO led nanocomposites to higher properties/unified structures. • MgO tuned composites showed higher toughness (37%) and strength (22%) than Al{sub 2}O{sub 3}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of ZnO/Ag/graphene composite and its enhanced photocatalytic efficiency

Highlights: ► ZnO/Ag/graphene composite was synthesized via a facile aqueous reaction. ► ZnO/Ag composite nanoparticles are anchored on a two-dimensional graphene sheet. ► Enhanced photocatalytic efficiency was obtained compared to ZnO/Ag composite. ► The composite shows excellent stability after four photodegradation cycling runs. - Abstract: ZnO/Ag/graphene composite was synthesized via a facile low-temperature aqueous solution reaction. The morphology and crystal phase of the obtained samples were well characterized by SEM, TEM, and XRD. The results indicated that ZnO/Ag nanoparticles (NPs) are anchored on the two-dimensional graphene sheet. The photocatalytic trials confirmed that the ZnO/Ag/graphene composite exhibited improved photocatalytic efficiency compared with the ZnO/Ag NPs and pristine ZnO NPs. The increased photocatalytic activity of ZnO/Ag/graphene was attributed to the effective charge separation and the suppressed recombination of photogenerated electron–hole pairs. Moreover, the ZnO/Ag/graphene sample showed excellent stability after four photodegradation cycling runs.

36 MATERIALS SCIENCE↗

Solvothermal synthesis of graphene-Sb{sub 2}S{sub 3} composite and the degradation activity under visible light

Graphical abstract: Display Omitted Highlights: ► Graphene-Sb{sub 2}S{sub 3} composites were synthesized through a facile solvothermal method. ► Hydroxyl radicals are the main species responsible for the photodegradation activity. ► Graphene-Sb{sub 2}S{sub 3} demonstrated dramatically improved visible light degradation activity. -- Abstract: Novel graphene-Sb{sub 2}S{sub 3} (G-Sb{sub 2}S{sub 3}) composites were synthesized via a facile solvothermal method with graphene oxide (GO), SbCl{sub 3} and thiourea as the reactants. GO played an important role in controlling the size and the distribution of the formed Sb{sub 2}S{sub 3} nanoparticles on the graphene sheets with different density. Due to the negative surface charge, smaller Sb{sub 2}S{sub 3} particles size and efficient electrons transfer from Sb{sub 2}S{sub 3} to graphene, the composites demonstrated improved photodegradation activity on rhodamine B (RhB). Among these composites, the product G-Sb{sub 2}S{sub 3} 0.1, which was synthesized with the GO concentration of 0.1 mg/mL, exhibited the highest photodegradation activity owing to the considerable density of Sb{sub 2}S{sub 3} nanoparticles onto graphene sheet free of aggregation. Hydroxyl radicals (·OH) derived from conduction band (CB) electrons of Sb{sub 2}S{sub 3} is suggested to be responsible for the photodegradation of RhB. The high visible light degradation activity and the satisfactory cycling stability made the as-prepared G-Sb{sub 2}S{sub 3} 0.1 an applicable photocatalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗