Search NASA⌕ Search

Engineering topics

Yan, Yanfa

Publications and source records attributed to Yan, Yanfa.

At least 55 records · Page 3

Engineering Perovskite Precursor Inks for Scalable Production of High‐Efficiency Perovskite Photovoltaic Modules

Abstract Blade coating of perovskite solar cells (PSCs) and modules has progressed considerably toward the industrial production of perovskite photovoltaics. Developing stable perovskite precursors is critical for achieving uniform coating over large areas. Here, the engineering of a perovskite precursor solution consisting of 2‐methoxyethanol (2‐Me) and 1,3‐dimethyl‐imidazolidinone (DMI) with superior intermediate phase stability that enables scalable production of efficient perovskite solar modules is reported. With this perovskite precursor solution, uniform and pinhole‐less perovskite film is deposited over a large area of > 100 cm 2 and higher‐efficiency PSCs and modules are obtained. The best‐performing unit cell and module with n‐i‐p configuration reach power conversion efficiencies of 23.4% and 20.1%, respectively. Additionally, a series of non‐destructive metrology methods, such as spectroscopic ellipsometry, hyperspectral photoluminescence, electroluminescence, and laser beam‐induced current mapping, are employed to assess and guide the development the blade‐coated perovskite modules. This results show that rational engineering of precursor inks for blade coating is promising for the scalable production of efficient perovskite solar modules.

36 MATERIALS SCIENCE↗

Subsurface Characteristics of Metal-Halide Perovskites Polished by an Argon Ion Beam

Focused ion beam (FIB) techniques have been frequently used to section metal-halide perovskites for microstructural investigations. However, the ion beams directly irradiating the sample surface may alter its properties far different from those of pristine, potentially leading to modified deterioration mechanisms under aging stressors. Here, we combine complementary approaches to measure the subsurface characteristics of polished perovskites and identify the chemical species responsible for the measured properties. Analysis of the experimental results in conjunction with Monte Carlo simulations indicates that atomic displacements and local heating occur in the first ≈15 nm of the subsurface of methylammonium lead iodide (MAPbI 3 ) by glancing-angle Ar + beam irradiation (4 kV at 3°). The lead-rich, iodine-deficient surface promotes rapid phase segregation under thermal aging conditions. On the other hand, despite the subsurface modification, our experiments confirm that the rest of the MAPbI 3 bulk retains the material integrity. Our observation supports that polished perovskites could serve in studying the properties of bulk or buried junctions far away from the altered subsurface with care.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Implications of Electron Transport Layer and Back Metal Contact Variations in Tin–Lead Perovskite Solar Cells Assessed by Spectroscopic Ellipsometry and External Quantum Efficiency

The structural and optical properties of hybrid organic–inorganic metal halide perovskite solar cells are measured by spectroscopic ellipsometry to reveal an optically distinct interfacial layer among the back contact metal, charge transport, and absorber layers. Understanding how this interfacial layer impacts performance is essential for developing higher performing solar cells. Here, this interfacial layer is modeled by Bruggeman effective medium approximations (EMAs) to contain perovskite, C 60 , BCP, and metal. External quantum efficiency (EQE) simulations that consider scattering, electronic losses, and the formation of nonparallel interfaces are created with input derived from ellipsometry structural-optical models and compared with experimental EQE to estimate optical losses. This nonplanar interface causes optical losses in short circuit current density (JSC) of up to 1.2 mA cm –2 . A study of glass/C 60 /SnO 2 /Ag or Cu and glass/C 60 /BCP/Ag film stacks shows that C 60 and BCP mix, but replacing BCP with SnO 2 can prevent mixing between the ETLs to prevent contact between C 60 and back contact metal and enable the formation of a planar interface between ETLs and back contact metals.

14 SOLAR ENERGY↗

CdTe-based thin film photovoltaics: Recent advances, current challenges and future prospects

Cadmium telluride (CdTe)-based cells have emerged as the leading commercialized thin film photovoltaic technology and has intrinsically better temperature coefficients, energy yield, and degradation rates than Si technologies. More than 30 GW peak (GWp) of CdTe-based modules are installed worldwide, multiple companies are in production, modules are shipping at up to 18.6% efficiency, and lab cell efficiency is above 22%. We review developments in the science and technology that have occurred over approximately the past decade. These achievements were enabled by manufacturing innovations and scaling module production, as well as maximizing photocurrent through window layer optimization and alloyed CdSe x Te 1-x (CST) absorbers. Improved chlorine passivation processes, film microstructure, and serendipitous Se defect passivation significantly increased minority carrier lifetime. Efficiencies >22% have been realized for both Cu and As doped CST-based cells. The path to further efficiency gains hinges primarily on increasing open circuit voltage (V oc ) and fill factor (FF) through innovations in materials, fabrication methods, and device stacks. Replacing the longstanding Cu doping with As doping is resulting in better module stability and is being translated to large-scale production. To realize 25% efficiency and >1 V V oc , research and development is needed to increase the minority carrier lifetime beyond 100 ns, reduce grain boundary and interface recombination, and tailor band diagrams at the front and back interfaces. Many of these goals have been realized separately however combining them together using scalable manufacturing approaches has been elusive to date. We review these achievements and outstanding opportunities for this remarkable photovoltaic technology.

14 SOLAR ENERGY↗

Suppressed phase segregation for triple-junction perovskite solar cells

The tunable band gaps and facile fabrication of perovskites make them attractive for multi-junction photovoltaics. However, light-induced phase segregation limits their efficiency and stability: this occurs in wide band gap (> 1.65 eV) I/Br mixed perovskite absorbers, and becomes even more acute in the top cells of triple-junction solar photovoltaics that requires a fully 2.0 eV band gap absorber. We report herein that lattice distortion in I/Br mixed perovskites is correlated with the suppression of phase segregation, generating an increased ion migration energy barrier arising from the decreased average interatomic distance between A-site cation and iodide. Using a ~2.0 eV Rb/Cs mixed-cation inorganic perovskite with large lattice distortion in the top subcell, we fabricated all-perovskite triple-junction solar cells and achieved an efficiency of 24.3% (23.3% certified quasi-steady-state efficiency) with an open-circuit voltage of 3.21 V. This is, to our knowledge, the first reported certified efficiency for perovskite-based triple-junction solar cells. The triple-junction devices retain 80% of their initial efficiency following 420 hours of operation at the maximum power point.

14 SOLAR ENERGY↗

Influence of External Conditions on the Black-to-Yellow Phase Transition of CsPbI 3 Based on First-Principles Calculations: Pressure and Moisture

All-inorganic CsPbI 3 perovskite has emerged as a promising candidate for next-generation solar cells. However, owing to the poor structural stability of black phase CsPbI 3 perovskite at room temperature, it spontaneously transforms to the yellow, photoinactive, nonperovskite phase at room temperature, limiting further development of CsPbI 3 perovskite solar cells. Here, to better understand the mechanism driving such undesirable phase transformation, we examine the thermodynamics and kinetics associated with γ-to-δ phase transformation using density functional theory calculation. A solid-state nudged elastic band method was employed to find minimum energy pathways assuming a concerted solid-state phase transformation between these two phases. The gas molecules representing atmospheric (H 2 O, O 2 , and N 2 ) and inert (Ar) ambient environments, as well as applied external pressure, were considered to examine the influence of external conditions on the black-to-yellow phase transition. Our calculation reveals that, with increasing pressure, the thermodynamic driving force for converting the γ-phase to the δ-phase increases, whereas a larger activation energy must be overcome for the phase transition to occur. We also investigate the moisture-induced phase transformation with an H 2 O molecule and its dissociated species (H + /OH – ) and demonstrate that the reaction energy barriers can be significantly lowered in the presence of H 2 O or OH – . On the other hand, other nonpolar species (O 2 , N 2 , and Ar) have a negligible effect on the phase transformation kinetics, while they might reduce the thermodynamic driving force for the phase transformation and suppress the undesirable phase transformation. Our theoretical prediction could support recent observations that the γ-to-δ phase transformation occurs rapidly and catalytically in the presence of moisture, whereas in dry argon and dry oxygen atmospheres, the γ-CsPbI 3 remains stable.

14 SOLAR ENERGY↗

Co-deposition of hole-selective contact and absorber for improving the processability of perovskite solar cells

Simplifying the manufacturing processes of renewable energy technologies is crucial to lowering the barriers to commercialization. In this context, to improve the manufacturability of perovskite solar cells (PSCs), here we have developed a one-step solution-coating procedure in which the hole-selective contact and perovskite light absorber spontaneously form, resulting in efficient inverted PSCs. We observed that phosphonic or carboxylic acids, incorporated into perovskite precursor solutions, self-assemble on the indium tin oxide substrate during perovskite film processing. They form a robust self-assembled monolayer as an excellent hole-selective contact while the perovskite crystallizes. Our approach solves wettability issues and simplifies device fabrication, advancing the manufacturability of PSCs. Our PSC devices with positive-intrinsic-negative (p-i-n) geometry show a power conversion efficiency of 24.5% and retain >90% of their initial efficiency after 1,200 h of operating at the maximum power point under continuous illumination. The approach shows good generality as it is compatible with different self-assembled monolayer molecular systems, perovskites, solvents and processing methods.

14 SOLAR ENERGY↗

Oxygen Management to Avoid Photo-Inactive Cd(S,Se) for Efficient Cd(Se,Te) Solar Cells

Our previous work has demonstrated that the formation of a penternary cadmium chalcogenide Cd(O,S,Se,Te) region can significantly reduce the front interface recombination in Cd(Se,Te)-based thin-film solar cells. In this work, we have shown that oxygen management during the device fabrication is crucial to form this region. While both the CdS and CdSe layer depositions and the postdeposition CdCl2 treatment should be conducted in the presence of oxygen, the CdTe deposition should be conducted in an oxygen-free atmosphere. Improper oxygen management leads to low device performance due to the formation of a photoinactive Cd(S,Se) region and reduced absorber quality. Additionally, we investigated the carrier transport and collection properties in devices with photoinactive Cd(S,Se) and photoactive Cd(O,S,Se,Te) at the front interface to gain comprehensive understanding of the mechanisms that resulted in improved efficiencies approaching 20%.

CdTe deposition↗

Rational design of Lewis base molecules for stable and efficient inverted perovskite solar cells

Lewis base molecules that bind undercoordinated lead atoms at interfaces and grain boundaries (GBs) are known to enhance the durability of metal halide perovskite solar cells (PSCs). Using density functional theory calculations, we found that phosphine-containing molecules have the strongest binding energy among members of a library of Lewis base molecules studied herein. Experimentally, we found that the best inverted PSC treated with 1,3-bis(diphenylphosphino)propane (DPPP), a diphosphine Lewis base that passivates, binds, and bridges interfaces and GBs, retained a power conversion efficiency (PCE) slightly higher than its initial PCE of ~23% after continuous operation under simulated AM1.5 illumination at the maximum power point and at ~40°C for >3500 hours. DPPP-treated devices showed a similar increase in PCE after being kept under open-circuit conditions at 85°C for >1500 hours.

14 SOLAR ENERGY↗

Turn‐on Circularly Polarized Luminescence in Chiral Indium Chlorides by 5s 2 Metal Centers

Abstract Introducing chirality into the metal‐halide hybrids has enabled many emerging properties including chiroptical activity, spin‐dependent transport, and ferroelectricity. However, most of the chiral metal‐halide hybrids to date are non‐emissive, and the underlying mechanism remains elusive. Here, we show a new strategy to turn on the circularly polarized luminescence (CPL) in chiral metal‐halide hybrids. We demonstrate that alloying Sb 3+ into chiral indium‐chloride hybrids dramatically increases the photoluminescence quantum yield in two new series of chiral indium‐antimony chlorides. These materials exhibit strong CPL signals with tunable energy and a high dissymmetry factor up to 1.5×10 −2 . Mechanistic studies reveal that the emission originates from the self‐trapped excitons centered in 5s 2 Sb 3+ . Moreover, near‐ultraviolet pumped white light is demonstrated with a polarization up to 6.0 %. Our work demonstrates new strategies towards highly luminescent chiral metal‐halide hybrids.

Wang, Zhiyu↗

Water-Assisted Lift-Off Process for Flexible CdTe Solar Cells

In recent years, various lift-off methods have been developed to fabricate lightweight and flexible cadmium telluride (CdTe)-based solar cells. In this work, we report flexible cadmium sulfide (CdS)/CdTe solar cells using a water-assisted lift-off approach. Here we demonstrate that an additional cadmium chloride treatment for the CdS film is critical to improve the grain size of CdS and the post-deposited CdTe film and the electron conductivity of the CdS film. As a result, the quality of the CdS/CdTe front junction is significantly improved with reduced nonradiative recombination. Finally, our lightweight and flexible polycrystalline CdTe solar cells demonstrate a champion power conversion efficiency of 12.6%.

14 SOLAR ENERGY↗

Optical activity of solids from first principles

Within the framework of independent particle approximation, the optical activity tensor of solids is formulated as from different contributions: the magnetic dipole, electric quadrupole, and band dispersion terms. The first two terms have similar counterparts in the theory of finite systems, whereas the last term is unique for crystals. Further, the magnetic dipole and electric quadrupole transition moments are calculated with a sum-over-states formulation. We apply the formulation to calculate and analyze the optical rotation of elemental tellurium and the circular dichroism of the (6,4) carbon nanotube. Decomposed optical activity into different contributions is discussed. The calculated spectra agree well with experiments. As a showcase of achiral crystals, we calculate the optical activity of wurtzite GaN.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Post‐Annealing Treatment on Hydrothermally Grown Antimony Sulfoselenide Thin Films for Efficient Solar Cells

Herein, antimony sulfoselenide (Sb 2 (S, Se) 3 ) thin‐film solar cells are fabricated by a hydrothermal method followed by a post‐deposition annealing process at different temperatures and the impact of the annealing temperature on the morphological, structural, optoelectronic, and defect properties of the hydrothermally grown Sb 2 (S, Se) 3 films is investigated. It is found that a proper annealing temperature leads to high‐quality Sb 2 (S, Se) 3 films with large crystal grains, high crystallinity, preferred crystal orientation, smooth and uniform morphology, and reduced defect density. These results show that suppressing deep‐level defects is crucial to enhance solar cell performance. After optimizing the annealing process, Sb 2 (S, Se) 3 solar cells with an improved power conversion efficiency 2.04 to 8.48% are obtained.

14 SOLAR ENERGY↗

Compositional texture engineering for highly stable wide-bandgap perovskite solar cells

The development of highly stable and efficient wide-bandgap (WBG) perovskite solar cells (PSCs) based on bromine-iodine (Br–I) mixed-halide perovskite (with Br greater than 20%) is critical to create tandem solar cells. However, issues with Br–I phase segregation under solar cell operational conditions (such as light and heat) limit the device voltage and operational stability. This challenge is often exacerbated by the ready defect formation associated with the rapid crystallization of Br-rich perovskite chemistry with antisolvent processes. We combined the rapid Br crystallization with a gentle gas-quench method to prepare highly textured columnar 1.75–electron volt Br–I mixed WBG perovskite films with reduced defect density. Here, with this approach, we obtained 1.75–electron volt WBG PSCs with greater than 20% power conversion efficiency, approximately 1.33-volt open-circuit voltage (V oc ), and excellent operational stability (less than 5% degradation over 1100 hours of operation under 1.2 sun at 65°C). When further integrated with 1.25–electron volt narrow-bandgap PSC, we obtained a 27.1% efficient, all-perovskite, two-terminal tandem device with a high V oc of 2.2 volts.

14 SOLAR ENERGY↗

20%-efficient polycrystalline Cd(Se,Te) thin-film solar cells with compositional gradient near the front junction

Bandgap gradient is a proven approach for improving the open-circuit voltages (V OC s) in Cu(In,Ga)Se 2 and Cu(Zn,Sn)Se 2 thin-film solar cells, but has not been realized in Cd(Se,Te) thin-film solar cells, a leading thin-film solar cell technology in the photovoltaic market. Here, we demonstrate the realization of a bandgap gradient in Cd(Se,Te) thin-film solar cells by introducing a Cd(O,S,Se,Te) region with the same crystal structure of the absorber near the front junction. The formation of such a region is enabled by incorporating oxygenated CdS and CdSe layers. We show that the introduction of the bandgap gradient reduces the hole density in the front junction region and introduces a small spike in the band alignment between this and the absorber regions, effectively suppressing the nonradiative recombination therein and leading to improved VOCs in Cd(Se,Te) solar cells using commercial SnO 2 buffers. A champion device achieves an efficiency of 20.03% with a V OC of 0.863 V.

14 SOLAR ENERGY↗

Turn-on Circularly Polarized Luminescence in Chiral Indium Chlorides by 5s 2 Metal Centers

Introducing chirality into the metal-halide hybrids has enabled many emerging properties including chiroptical activity, spin-dependent transport, and ferroelectricity. However, most of the chiral metal-halide hybrids to date are non-emissive, and the underlying mechanism remains elusive. Here, in this study, we show a new strategy to turn on the circularly polarized luminescence (CPL) in chiral metal-halide hybrids. We demonstrate that alloying Sb 3+ into chiral indium-chloride hybrids dramatically increases the photoluminescence quantum yield in two new series of chiral indium-antimony chlorides. These materials exhibit strong CPL signals with tunable energy and a high dissymmetry factor up to 1.5×10 -2 . Mechanistic studies reveal that the emission originates from the self-trapped excitons centered in 5s 2 Sb 3+ . Moreover, near-ultraviolet pumped white light is demonstrated with a polarization up to 6.0 %. Our work demonstrates new strategies towards highly luminescent chiral metal-halide hybrids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Regulating surface potential maximizes voltage in all-perovskite tandems

The open circuit voltage (V OC ) deficit in perovskite solar cells (PSCs) is greater in wide bandgap (>1.7 eV) cells than in ~1.5 eV perovskites. Quasi-Fermi level splitting (QFLS) measurements reveal V OC -limiting recombination at the electron transport layer (ETL) contact. This, we find, stems from inhomogeneous surface potential and poor perovskite-ETL energetic alignment. Common monoammonium surface treatments fail to address this; instead we introduce diammonium molecules to modify the perovskite surface states and achieve a more uniform spatial distribution of surface potential. Using 1,3-propane diammonium (PDA), QFLS increases by 90 meV, enabling 1.79 eV PSCs with a certified 1.33 V V OC , and > 19% power conversion efficiency (PCE). Incorporating this layer into a monolithic all-perovskite tandem, we report a record V OC of 2.19 V (89% of the Detailed Balance V OC limit) and > 27% PCE (26.3% certified quasi-steady-state). Furthermore, these tandems retain more than 86% of their initial PCE after 500 hrs operation.

14 SOLAR ENERGY↗