Search NASA⌕ Search

Engineering topics

Yan, Yanfa

Publications and source records attributed to Yan, Yanfa.

At least 145 records · Page 8

Phase Stability and Electronic Structure of Prospective Sb-Based Mixed Sulfide and Iodide 3D Perovskite (CH 3 NH 3 )SbSI 2

Lead-free antimony-based mixed sulfide and iodide perovskite phases have recently been reported to be synthesized experimentally and to exhibit reasonable photovoltaic performance. In this work, through a combination of experimental validation and computational analysis, we show no evidence of the formation of the mixed sulfide and iodide perovskite phase, MASbSI 2 (MA = CH 3 NH 3 + ), and instead that the main products are a mixture of the binary and ternary compounds (Sb 2 S 3 and MA 3 Sb 2 I 9 ). Density functional theory calculations also indicate that such a mixed sulfide and iodide perovskite phase should be thermodynamically less stable compared with binary/ternary anion-segregated secondary phases and less likely to be synthesized under equilibrium conditions. Additionally, band structure calculations show that this mixed sulfide and iodide phase, if possible to synthesize (e.g., under nonequilibrium conditions), should have a suitable direct band gap for photovoltaic application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal–Organic Framework-Derived CoWP@C Composite Nanowire Electrocatalyst for Efficient Water Splitting

Practical application of electrochemical water splitting demands durable, efficient, and non-noble metal catalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Herein, we report a new hydrogen evolution nanowire electrocatalyst, consisting of S-doped CoWP nanoparticles embedded in S- and N-doped carbon matrix (S-CoWP@(S,N)-C), which is in situ transformed from Hofmann-type (Co, W)-based metal–organic framework (MOF) nanowires. Because of S and N doping to the carbon matrix and the S doping to CoWP nanoparticles, the obtained S-CoWP@(S,N)-C catalyst reaches a current density of -10 mA cm –2 at -35 and -67 mV (vs RHE) in acidic and alkaline electrolytes, respectively. Powered by a lead halide perovskite solar cell, an unassisted two-electrode solar water-splitting device using MOF-derived S-CoWP@(S,N)-C HER electrocatalysts and S-CoW@(S,N)-C OER electrocatalysts displays a solar-to-hydrogen conversion efficiency of 10.98%. Our method is highly applicable for developing robust electrocatalysts toward efficient and low-cost solar-driven water splitting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stability, Electronic and Optical Properties of M 4 M'X 4 (M = Ga or In, M' = Si, Ge, or Sn, X = Chalcogen) Photovoltaic Absorbers

Three-dimensional cubic M 4 M'X 4 (M = Ga or In, M' = Si, Ge, or Sn, and X = S, Se, or Te) have been proposed as photovoltaic absorber materials. Here, we present density functional theory investigation of the stability, electronic and optical properties of M 4 M'X 4 . We find that M 4 M'X 4 exhibit unique electronic properties. M elements lose partially both the outmost s and p electrons, whereas M' elements only lose a small fraction of the valence electrons. As a result, the conduction band edges of M 4 M'X 4 consist of a large contribution from the M s orbitals, leading to rather small electron effective masses. The valence bands are derived from M, M', and X p orbitals. The band gap of this family can be tuned by selecting the combination of M and X elements. Among these semiconductors, In 4 GeS 4 , In 4 GeSe 4 , In 4 SnS 4 , and In 4 SnSe 4 are suitable for photovoltaic applications due to their stability and suitable band gaps. However, the inclusion of scarce In may hinder their large-scale applications.

36 MATERIALS SCIENCE↗

Bandgap Engineering of Stable Lead‐Free Oxide Double Perovskites for Photovoltaics

Abstract Despite the rapid progress in solar power conversion efficiency of archetype organic–inorganic hybrid perovskite CH 3 NH 3 PbI 3 ‐based solar cells, the long‐term stability and toxicity of Pb remain the main challenges for the industrial deployment, leading to more uncertainties for global commercialization. The poor stabilities of CH 3 NH 3 PbI 3 ‐based solar cells may not only be attributed to the organic molecules but also the halides themself, most of which exhibit intrinsic instability under moisture and light. As an alternative, the possibility of oxide perovskites for photovoltaic applications is explored here. The class of lead‐free stable oxide double perovskites A 2 M(III)M(V)O 6 (A = Ca, Sr, Ba; M(III) = Sb 3+ or Bi 3+ ; M(V) = V 5+ , Nb 5+ , or Ta 5+ ) is comprehensively explored with regard to their stability and their electronic and optical properties. Apart from the strong stability, this class of double perovskites exhibits direct bandgaps ranging from 0.3 to 3.8 eV. With proper B site alloying, the bandgap can be tuned within the range of 1.0–1.6 eV with optical absorptions as strong as CH 3 NH 3 PbI 3 , making them suitable for efficient single‐junction thin‐film solar cell application.

Sun, Qingde↗

Effective Carrier‐Concentration Tuning of SnO 2 Quantum Dot Electron‐Selective Layers for High‐Performance Planar Perovskite Solar Cells

Abstract The carrier concentration of the electron‐selective layer (ESL) and hole‐selective layer can significantly affect the performance of organic–inorganic lead halide perovskite solar cells (PSCs). Herein, a facile yet effective two‐step method, i.e., room‐temperature colloidal synthesis and low‐temperature removal of additive (thiourea), to control the carrier concentration of SnO 2 quantum dot (QD) ESLs to achieve high‐performance PSCs is developed. By optimizing the electron density of SnO 2 QD ESLs, a champion stabilized power output of 20.32% for the planar PSCs using triple cation perovskite absorber and 19.73% for those using CH 3 NH 3 PbI 3 absorber is achieved. The superior uniformity of low‐temperature processed SnO 2 QD ESLs also enables the fabrication of ≈19% efficiency PSCs with an aperture area of 1.0 cm 2 and 16.97% efficiency flexible device. The results demonstrate the promise of carrier‐concentration‐controlled SnO 2 QD ESLs for fabricating stable, efficient, reproducible, large‐scale, and flexible planar PSCs.

Yang, Guang↗

Four-Terminal All-Perovskite Tandem Solar Cells Achieving Power Conversion Efficiencies Exceeding 23%

We report on fabrication of 4-terminal all-perovskite tandem solar cells with power conversion efficiencies exceeding 23% by mechanically stacking semitransparent 1.75 eV wide-bandgap FA 0.8 Cs 0.2 Pb(I 0.7 Br 0.3 ) 3 perovskite top cells with 1.25 eV low-bandgap (FASnI 3 ) 0.6 (MAPbI 3 ) 0.4 bottom cells. The top cells use MoOx/ITO transparent electrodes and achieve transmittance up to 70% beyond 700 nm.

14 SOLAR ENERGY↗

Room-temperature fabrication of a delafossite CuCrO 2 hole transport layer for perovskite solar cells

Delafossite oxides are promising hole transport layer (HTL) candidates for perovskite solar cells, due to their wide band gap, favorable energy band alignment relative to the perovskite absorber and simplicity of processing. In this paper, we investigate the properties of CuCrO2 (CCO) delafossite films using an integration of experimental and computational techniques. Phase-pure CCO films are deposited at room temperature by spin-casting suspensions of hydrothermally-synthesized nanoparticles, for use in a glass/ITO/CCO/CH3NH3PbI3/C60/BCP/Ag device structure. Although density functional theory (DFT) calculations predict an elevated hole effective mass along certain crystallographic directions, the nearly isotropic shape and small size of the CCO nanoparticles preserves transport properties within the films by randomizing particle orientation, preventing these unfavorable directions from dominating the film conductivity. Experimental measurements confirm that the CCO films display appropriate optical and electrical properties for use as an HTL, in good agreement with the DFT calculations. Solar cells made using these films exhibit stabilized power conversion efficiencies exceeding 14%, with only minor hysteresis in the current–voltage characteristics.

Dunlap-Shohl, Wiley A.↗

Barium Bismuth Niobate Double Perovskite/Tungsten Oxide Nanosheet Photoanode for High‐Performance Photoelectrochemical Water Splitting

Abstract Recently, a new method to effectively engineer the bandgap of barium bismuth niobate (BBNO) double perovskite was reported. However, the planar electrodes based on BBNO thin films show low photocurrent densities for water oxidation owing to their poor electrical conductivity. Here, it is reported that the photoelectrochemical (PEC) activity of BBNO‐based electrodes can be dramatically enhanced by coating thin BBNO layers on tungsten oxide (WO 3 ) nanosheets to solve the poor conductivity issue while maintaining strong light absorption. The PEC activity of BBNO/WO 3 nanosheet photoanodes can be further enhanced by applying Co 0.8 Mn 0.2 O x nanoparticles as a co‐catalyst. A photocurrent density of 6.02 mA cm −2 at 1.23 V (vs reversible hydrogen electrode (RHE)) is obtained using three optically stacked, but electrically parallel, BBNO/WO 3 nanosheet photoanodes. The BBNO/WO 3 nanosheet photoanodes also exhibit excellent stability in a high‐pH alkaline solution; the photoanodes demonstrate negligible photocurrent density decay while under continuous PEC operation for more than 7 h. This work suggests a viable approach to improve the PEC performance of BBNO absorber‐based devices.

Weng, Baicheng↗

A New Hole Transport Material for Efficient Perovskite Solar Cells With Reduced Device Cost

To realize commercialization of perovskie solar cell (PVSC) technology, it is essential to reduce the device costs while maintaining high power conversion efficiencies (PCEs). So far, the high cost of the most commonly used hole selective material, 2,2′,7,7′‐Tetrakis (N,N‐di‐p‐methoxyphenylamino)‐9,9′‐spirobifluorene (spiro‐OMeTAD), for high‐PCE PVSCs presents a significant obstacle for device cost reduction. In this work, the synthesis and characterization of a new spiro‐OMeTAD derivative hole selective material, 2,6,14‐tris(5′‐(N,N‐bis(4‐methoxyphenyl)aminophenol‐4‐yl)‐3,4‐ethylenedioxythiophen‐2‐yl)‐triptycene (TET) is reported. TET features a three‐dimensional structure consisting of a triptycene core and triarylamine arms linked by 3,4‐ethylenedioxythiophene, facilitating efficient hole transport. Planar PVSCs using TET hole selective layers (HSLs) achieved high fill factors of over 81% and steady‐state efficiencies of up to 18.6%, comparable with that (19.0%) of PVSC using spiro‐OMeTAD HSL. Importantly, the hereby reported efficient PVSCs can be produced with very thin TET HSLs (about 30 nm). Considering the lower laboratory synthesis and purification cost ($123 vs. $500 g −1 ) and thinner HSL (30 vs. 200 nm), the cost for TET on a unit area of one device is 25 times lower than that for high‐purity spiro‐OMeTAD. The device with TET HSL shows good stability under continuous illumination. Therefore, this work makes a significant step forward toward the commercialization of the emerging PVSC technology.

Sun, Yuhao↗

Roles of Pseudo-Closed s 2 Orbitals for Different Intrinsic Hole Generation between Tl–Bi and In–Bi Bromide Double Perovskites

Although metal halide double perovskites A 2 B(I)B(III)X 6 are expected as nontoxic alternatives for lead halide perovskites, recent studies have shown that only Tl(I)–Bi(III) and In(I)–Bi(III) bromides are thermodynamically stable and possess optoelectronic properties suitable for photovoltaic absorbers. In this work, we show, through density functional theory calculations, that Tl–Bi and In–Bi bromide double perovskites exhibit significantly different semiconducting behaviors due to the different energy levels of the highest-occupied pseudoclosed s 2 orbitals of Tl(I) and In(I). While Tl–Bi double perovskites can exhibit semiconducting $p$-type properties, In–Bi bromide double perovskites exhibit metallic $p$-type ones regardless of the synthesis condition due to the extremely low formation energy of In vacancy. Such difference makes Tl–Bi bromide double perovskites suitable for optoelectronic applications, but not In–Bi bromide double perovskites. Furthermore, there is a high probability for In to substitute a Bi site, forming a local In–In bromide double perovskite structure with a lower local conduction band minimum, detrimentally affecting the open circuit voltage of In–Bi bromide double perovskite-based thin film solar cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantitative analysis of time-resolved microwave conductivity data

Flash-photolysis time-resolved microwave conductivity (fp-TRMC) is a versatile, highly sensitive technique for studying the complex photoconductivity of solution, solid, and gas-phase samples. The purpose of this paper is to provide a standard reference work for experimentalists interested in using microwave conductivity methods to study functional electronic materials, describing how to conduct and calibrate these experiments in order to obtain quantitative results. The main focus of the paper is on calculating the calibration factor, K, which is used to connect the measured change in microwave power absorption to the conductance of the sample. We describe the standard analytical formulae that have been used in the past, and compare them to numerical simulations. This comparison shows that the most widely used analytical analysis of fp-TRMC data systematically under-estimates the transient conductivity by ~60%. We suggest a more accurate semi-empirical way of calibrating these experiments. However, we emphasize that the full numerical calculation is necessary to quantify both transient and steady-state conductance for arbitrary sample properties and geometry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Perovskite Photovoltaics: The Path to a Printable Terawatt-Scale Technology

Abundant, low-cost, reliable, and clean energy is critical not just to maintain but also to improve the living conditions across the globe. Because of the world's unrelenting population and GDP growth that is only slightly offset by reductions in energy intensity per $ of GDP, it has been estimated that by 2050 the world will consume an average of 30 Terawatts (TW) of total (i.e., not just electricity) energy, of which, assuming no current generation capacity retires, at least between 10-15 TW will be completely new capacity. Addressing this 'Terawatt challenge', a term originally coined by Richard Smalley in 2004, in a nonpolluting and sustainable way is integral to addressing socioeconomic needs in both industrial and rapidly developing countries worldwide. In conjunction with ongoing electrification of the energy system, the vastness of the available solar resource will provide a solution to the world's energy needs if we can develop sufficiently low-cost, high-performance, and massively scalable photovoltaic (PV) technology.

14 SOLAR ENERGY↗

Junction Quality of SnO 2 -Based Perovskite Solar Cells Investigated by Nanometer-Scale Electrical Potential Profiling

Electron-selective layers (ESLs) and hole-selective layers (HSLs) are critical in high-efficiency organic-inorganic lead halide perovskite (PS) solar cells for charge-carrier transport, separation, and collection. We developed a procedure to assess the quality of the ESL/PS junction by measuring potential distribution on cross-section of SnO 2 -based perovskite solar cells using Kelvin probe force microscopy. Using the potential profiling, we compared three types of cells made of different ESLs but otherwise having identical device structure: cells with PS deposited directly on bare fluorine-doped SnO 2 (FTO)-coated glass; cells with an intrinsic SnO 2 thin layer on the top of FTO as an effective ESL; and cells with the SnO2 ESL and adding a self-assembled monolayer (SAM) of fullerene. The results reveal two major potential drops or electric fields at the ESL/PS and PS/HSL interfaces. The electric-field ratio between the ESL/PS and PS/HSL interfaces increased in devices as follows: FTO < SnO 2 -ESL < SnO 2 +SAM; this sequence explains the improvements of fill factor (FF) and open-circuit voltage ( V oc ). The improvement of FF from the FTO to SnO 2 -ESL cells may result from the reduction in voltage lose at the PS/HSL back interface and the improvement of V oc from the prevention of hole recombination at the ESL/PS front interface. The further improvements with adding a SAM is caused by the defect passivation at the ESL/PS interface, and hence, improvement of the junction quality. Furthermore, these nanoelectrical findings suggest possibilities for improving the device performance by further optimizing the SnO2-based ESL material quality and the ESL/PS interface.

36 MATERIALS SCIENCE↗

Effect of non-stoichiometric solution chemistry on improving the performance of wide-bandgap perovskite solar cells

A high-efficiency wide-bandgap (WBG) perovskite solar cell is critical for developing perovskite-related (e.g., all-perovskite, perovskite/Si, or perovskite/Cu(In,Ga)Se 2 ) tandem devices. Here, we demonstrate the use of non-stoichiometric precursor chemistry with excess methylammonium halides (MAX; X = I, Br, or Cl) for preparing high-quality ~1.75-eV FA 0.83 Cs 0.17 Pb(I 0.6 Br 0.4 ) 3 perovskite solar cells. Among various methylammonium halides, using excess MABr in the non-stoichiometric precursor exhibits the strongest effect on improving perovskite crystallographic properties and device characteristics without affecting the perovskite composition. In contrast, using excess MAI significantly reduces the bandgap of perovskite due to the replacement of Br with I. Using 40% excess MABr, we demonstrate a single-junction WBG perovskite solar cell with stabilized efficiency of 16.4%. We further demonstrate a 20.3%-efficient 4-terminal tandem device by using a 14.7%-efficient semi-transparent WBG perovskite top cell and an 18.6%-efficient unfiltered (5.6%-efficient filtered) Si bottom cell.

14 SOLAR ENERGY↗

Heterovalent B-Site Co-Alloying Approach for Halide Perovskite Bandgap Engineering

Compositional engineering, which can enrich the database of prospective materials and offer new or enhanced properties, represents one of the key focal points within halide perovskite research. Compositional engineering studies often focus on A + and X – site substitutions, within the ABX 3 perovskite structure, due to the relative ease of varying these sites. However, alloying on the B site can play a more important role in generating novel properties and decreasing Pb toxicity for Pb-based systems. To date, B site substitution has primarily been confined to single-element alloying. Herein, a heterovalent co-alloying strategy for the B site of halide perovskites is proposed. Ag I Bi III and Ag I Sb III are co-alloyed into a host crystal of APbBr 3 (A = Cs and methylammonium), leading to a larger range of prospective alloying elements on the perovskite B site. Furthermore, density functional theory-based first-principles calculations provide a possible rational for the red shift of the bandgap and blue shift of the photoluminescence (PL) in the alloying experiments.

42 ENGINEERING↗

Highly Sensitive Low‐Bandgap Perovskite Photodetectors with Response from Ultraviolet to the Near‐Infrared Region

Abstract It is a great challenge to obtain broadband response perovskite photodetectors (PPDs) due to the relatively large bandgaps of the most used methylammonium lead halide perovskites. The response range of the reported PPDs is limited in the ultraviolet–visible range. Here, highly sensitive PPDs are successfully fabricated with low bandgap (≈1.25 eV) (FASnI 3 ) 0.6 (MAPbI 3 ) 0.4 perovskite as active layers, exhibiting a broadband response from 300 to 1000 nm. The performance of the PPDs can be optimized by adjusting the thicknesses of the perovskite and C 60 layers. The optimized PPDs with 1000 nm thick perovskite layer and 70 nm thick C 60 layer exhibit an almost flat external quantum efficiency (EQE) spectrum from 350 to 900 nm with EQE larger than 65% under −0.2 V bias. Meanwhile, the optimized PPDs also exhibit suppressed dark current of 3.9 nA, high responsivity ( R ) of over 0.4 A W −1 , high specific detectivity ( D* ) of over 10 12 Jones in the near‐infrared region under −0.2 V. Such highly sensitive broadband response PPDs, which can work well as self‐powered conditions, offer great potential applications in multicolor light detection.

Wang, Wenbin↗

Progress in Theoretical Study of Metal Halide Perovskite Solar Cell Materials

Lead halide perovskites have recently emerged as promising absorbers for fabricating low-cost and high-efficiency thin-film solar cells. The record power conversion efficiency of lead halide perovskite-based solar cells has rapidly increased from 3.8% in 2009 to 22.1% in early 2016. Such rapid improvement is attributed to the superior and unique photovoltaic properties of lead halide perovskites, such as the extremely high optical absorption coefficients and super-long photogenerated carrier lifetimes and diffusion lengths that are not seen in any other polycrystalline thin-film solar cell materials. In the past a few years, theoretical approaches have been extensively applied to understand the fundamental mechanisms responsible for the superior photovoltaic properties of lead halide perovskites and have gained significant insights. Here, this review article highlights the important theoretical results reported in literature for the understanding of the unique structural, electronic, optical, and defect properties of lead halide perovskite materials. For comparison, we also review the theoretical results reported in literature for some lead-free perovskites, double perovskites, and nonperovskites.

14 SOLAR ENERGY↗