Search NASA⌕ Search

Engineering topics

Yang, J.

Publications and source records attributed to Yang, J..

At least 127 records · Page 7

Evaluation of Maxim Module-Integrated Electronics at the DOE Regional Test Centers: Preprint

Module-embedded power electronics developed by Maxim Integrated are under evaluation through a partnership with the Department of Energy's Regional Test Center (RTC) program. Field deployments of both conventional modules and electronics-enhanced modules are designed to quantify the performance advantage of Maxim's products under different amounts of inter-row shading, and their ability to be deployed at a greater ground-coverage-ratio than conventional modules. Simulations in PVSYST have quantified the predicted performance difference between conventional modules and Maxim's modules from inter-row shading. Initial performance results have identified diffuse irradiance losses at tighter row spacing for both the Maxim and conventional modules. Comparisons with published models show good agreement with models predicting the greatest diffuse irradiance losses. At tighter row spacing, all of the strings equipped with embedded power electronics outperformed their conventional peers. An even greater performance advantage is predicted to occur in the winter months when the amount of inter-row shading mismatch is at a maximum.

14 SOLAR ENERGY↗

Improvement of band gap profile in Cu(InGa)Se{sub 2} solar cells through rapid thermal annealing

Highlights: • Proper RTA treatment can effectively optimize band gap profile to more expected level. • Inter-diffusion of atoms account for the improvement of the graded band gap profile. • The variation of the band gap profile created an absolute gain in the efficiency by 1.22%. - Abstract: In the paper, the effect of rapid thermal annealing on non-optimal double-graded band gap profiles was investigated by using X-ray photoelectron spectroscopy and capacitance–voltage measurement techniques. Experimental results revealed that proper rapid thermal annealing treatment can effectively improve band gap profile to more optimal level. The annealing treatment could not only reduce the values of front band gap and minimum band gap, but also shift the position of the minimum band gap toward front electrode and enter into space charge region. In addition, the thickness of Cu(InGa)Se{sub 2} thin film decreased by 25 nm after rapid thermal annealing treatment. All of these modifications were attributed to the inter-diffusion of atoms during thermal treatment process. Simultaneously, the variation of the band gap profile created an absolute gain in the efficiency by 1.22%, short-circuit current density by 2.16 mA/cm{sup 2} and filled factor by 3.57%.

36 MATERIALS SCIENCE↗

Evaluation of Maxim Module-Integrated Electronics at the DOE Regional Test Centers (Presentation)

Module-embedded power electronics developed by Maxim Integrated are under evaluation through a partnership with the Department of Energy's Regional Test Center (RTC) program. Field deployments of both conventional modules and electronics-enhanced modules are designed to quantify the performance advantage of Maxim's products under different amounts of interrow shading, and their ability to be deployed at a greater ground-coverage ratio than conventional modules. Simulations in PVSYST have quantified the predicted performance difference between conventional modules and Maxim's modules from interrow shading. Initial performance results have identified diffuse irradiance losses at tighter row spacing for both the Maxim and conventional modules. Comparisons with published models show good agreement with models predicting the greatest diffuse irradiance losses. At tighter row spacing, all of the strings equipped with embedded power electronics outperformed their conventional peers. An even greater performance advantage is predicted to occur in the winter months when the amount of interrow shading mismatch is at a maximum.

14 SOLAR ENERGY↗

Diffusion and spectroscopy of water and lipids in fully hydrated dimyristoylphosphatidylcholine bilayer membranes

Microscopic structure and dynamics of water and lipids in a fully hydrated dimyristoylphosphatidylcholine phospholipid lipid bilayer membrane in the liquid-crystalline phase have been analyzed with all-atom molecular dynamics simulations based on the recently parameterized CHARMM36 force field. The diffusive dynamics of the membrane lipids and of its hydration water, their reorientational motions as well as their corresponding spectral densities, related to the absorption of radiation, have been considered for the first time using the present force field. In addition, structural properties such as density and pressure profiles, a deuterium-order parameter, surface tension, and the extent of water penetration in the membrane have been analyzed. Molecular self-diffusion, reorientational motions, and spectral densities of atomic species reveal a variety of time scales playing a role in membrane dynamics. The mechanisms of lipid motion strongly depend on the time scale considered, from fast ballistic translation at the scale of picoseconds (effective diffusion coefficients of the order of 10{sup −5} cm{sup 2}/s) to diffusive flow of a few lipids forming nanodomains at the scale of hundreds of nanoseconds (diffusion coefficients of the order of 10{sup −8} cm{sup 2}/s). In the intermediate regime of sub-diffusion, collisions with nearest neighbors prevent the lipids to achieve full diffusion. Lipid reorientations along selected directions agree well with reported nuclear magnetic resonance data and indicate two different time scales, one about 1 ns and a second one in the range of 2–8 ns. We associated the two time scales of reorientational motions with angular distributions of selected vectors. Calculated spectral densities corresponding to lipid and water reveal an overall good qualitative agreement with Fourier transform infrared spectroscopy experiments. Our simulations indicate a blue-shift of the low frequency spectral bands of hydration water as a result of its interaction with lipids. We have thoroughly analyzed the physical meaning of all spectral features from lipid atomic sites and correlated them with experimental data. Our findings include a “wagging of the tails” frequency around 30 cm{sup −1}, which essentially corresponds to motions of the tail-group along the instantaneous plane formed by the two lipid tails, i.e., in-plane oscillations are clearly of bigger importance than those along the normal-to-the plane direction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiferroicity and magnetoelectric coupling enhanced large magnetocaloric effect in DyFe{sub 0.5}Cr{sub 0.5}O{sub 3}

DyFe{sub 0.5}Cr{sub 0.5}O{sub 3} has been synthesized using a sol-gel method. It exhibits ferroelectricity at the antiferromagnetic ordering temperature T{sub N1}∼261 K. Large magnetocaloric effect (MCE) (11.3 J/kg K at 4.5 T) enhanced by magnetoelectric coupling due to magnetic field and temperature induced magnetic transition was observed. Temperature-dependent Raman study shows an anomalous behavior near T{sub N1} in the phonon modes related to the vibration of Dy atoms and stretching of CrO{sub 6}/FeO{sub 6} octahedra, suggesting the ferroelectricity in DyFe{sub 0.5}Cr{sub 0.5}O{sub 3} is associated with the spin-phonon coupling with respect to both Dy and Cr/Fe ions. These results suggest routes to obtain high-temperature multiferroicity and large MCE for practical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Disproportionation in Li-O{sub 2} Batteries Based on a Large Surface Area Carbon Cathode

In this paper we report on a kinetics study of the discharge process and its relationship to the charge overpotential in a Li-O{sub 2} cell for large surface area cathode material. The kinetics study reveals evidence for a first-order disproportionation reaction during discharge from an oxygen-rich Li{sub 2}O{sub 2} component with superoxide-like character to a Li{sub 2}O{sub 2} component. The oxygen-rich superoxide-like component has a much smaller potential during charge (3.2-3.5 V) than the Li{sub 2}O{sub 2} component (similar to 4.2 V). The formation of the superoxide-like component is likely due to the porosity of the activated carbon used in the Li-O{sub 2} cell cathode that provides a good environment for growth during discharge. The discharge product containing these two components is characterized by toroids, which are assemblies of nanoparticles. The morphologic growth and decomposition process of the toroids during the reversible discharge/charge process was observed by scanning electron microscopy and is consistent with the presence of the two components in the discharge product. The results of this study provide new insight into how growth conditions control the nature of discharge product, which can be used to achieve improved performance in Li-O{sub 2} cell.

25 ENERGY STORAGE↗

Magnesite formation from MgO and CO 2 at the pressures and temperatures of Earth's mantle

Magnesite (MgCO 3 ) is an important phase for the carbon cycle in and out of the Earth’s mantle. Its comparably large P-T stability has been inferred for several years based on the absence of its decomposition in experiments. Here we report the first experimental evidence for synthesis of magnesite out of its oxide components (MgO and CO 2 ) at P-T conditions relevant to the Earth’s mantle. Magnesite formation was observed in situ using synchrotron X-ray diffraction, coupled with laser-heated diamond-anvil cells (DACs), at pressures and temperatures of Earth’s mantle. Despite the existence of multiple high-pressure CO 2 polymorphs, the magnesite-forming reaction was observed to proceed at pressures ranging from 5 to 40 GPa and temperatures between 1400 and 1800 K. No other pressure-quenchable materials were observed to form via the MgO + CO 2 = MgCO 3 reaction. This work further strengthens the notion that magnesite may indeed be the primary host phase for oxidized carbon in the deep Earth.

Scott, Henry P.↗

Large remnant polarization and magnetic field induced destruction of cycloidal spin structure in Bi{sub 1-x}La{sub x}FeO{sub 3} (0 {<=} x {<=} 0.2)

We prepared a series of Bi{sub 1-x}La{sub x}FeO{sub 3} (0 {<=} x {<=} 0.2) ceramics with a sol-gel method and find that both the magnetization and dielectric constant show an abrupt anomaly near a critical field H{sub c}, which is attributed to the destruction of the cycloidal antiferromagnetic spin structure. The critical field H{sub c} decreases substantially from {approx}20 T for the x = 0 sample [Y. F. Popov et al., JETP Lett. 57, 69 (1993)] to {approx}2.8 T for the x = 0.17 sample and finally to 0 T for the x = 0.2 sample at room temperature (RT). It is also found that H{sub c} increases with decreasing temperature. The variation of H{sub c} with La substitution and temperature can be ascribed to the change in the magnetic anisotropy and isotropic superexchange interaction, respectively. We have also discussed the magnetodielectric effects in these samples in terms of the Ginzburg-Landau theory and the spin-phonon model. Moreover, increasing the doping level of La to 0.15 greatly improves the RT leakage-current and ferroelectric (FE) properties. A RT square-shaped FE hysteresis loop with remnant polarization (2P{sub r}) as high as {approx}64 {mu}C/cm{sup 2} is obtained for the x = 0.15 sample. These results may be important for potential applications in BiFeO{sub 3}-based magnetoelectric devices.

36 MATERIALS SCIENCE↗

Suppression of secondary electron yield by micro-porous array structure

We study secondary electron yield (SEY) suppression for metal materials using a roughened surface with a micro-porous array. First, we perform a Monte Carlo simulation of the electron trajectory in a single cylindrical well using a phenomenological model of secondary electron emission and the SEY suppression efficiency of a micro-porous array. The simulation results show that the SEY of a roughened surface is affected significantly by the aspect ratio of the micro-pores and the surface porosity of the metal plate. Then, to verify the simulation results, we produce a micro-porous array on metal plates using photolithography and measure their SEYs. We show that the micro-porous array structure can efficiently suppress the SEY of metal materials, and the measurements agree quantitatively with the corresponding simulation results. Finally, we derive an analytical formula to evaluate easily the SEY suppression efficiency of the Ag micro-porous array. In total, the micro-porous array proposed in this paper offers an alternative to SEY suppression in related areas such as multipactor effects in satellite payloads or electron cloud effects in accelerators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗