Search NASA⌕ Search

Engineering topics

Yang, Tao

Publications and source records attributed to Yang, Tao.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Using simulation to study solid oxide cell degradation

Slides of the presentation given by Harry Abernathy from the National Energy Technology Laboratory at the 2023 International Conference and Expo on Advanced Ceramics and Composites. The presentation was an overview of NETL's solid oxide cell performance degradation modeling, including a demonstration of the impact of microstructural analysis methods on the resulting degradation simulations.

Abernathy, Harry↗
DOE OSTI2022

Unconventional Highly Active and Stable Oxygen Reduction Catalysts Informed by Computational Design Strategies

As conventional strategies of engineering new MIEC materials for SOFCs over the past few decades would have eliminated a material like BFCZ75 from contention, this work suggests there is a need to re-think existing design criteria and develop and understand new rational materials design strategies that challenge conventional wisdom and chemical intuition. The ultimate goal of cathode design of SOFCs is to achieve a balance among electrical conductivity, ionic conductivity, oxygen exchange activity and long-term stability. Instead of searching for a replacement for unstable MIEC like LSCF, which works well in a ceria based composite electrode, some stable composites contain a highly conductive material mixing with a less conductive but highly ORR active and stable MIEC such as BFCZ75 or even triple-phase composites could be an alternative way to advance the current SOFC technology. (This work is published in May 2022 issue of Advanced Energy Materials. https://doi.org/10.1002/aenm.202201203 --&gt;)<br>

Liu, Jian↗
DOE OSTI2022

Multiphysics modeling of SOFC performance degradation caused by interface delamination and active layer cracking

In solid oxide device operation, delamination and cracking cause more catastrophic damage to cell life than other degradation mechanisms, leading to more rapid cell failure. The electrochemical performance degradation caused by electrode/electrolyte interface delamination and active layer cracking were investigated through in-house developed three-dimensional multiphysics simulations. Here the multiphysics simulations, fully calibrated against experimental datasets for button cells in a previous study, were extended to quantitatively investigate the effects of electrode/electrolyte interface delamination and active layer cracking. The simulated polarization curves and impedance behavior with various levels of delamination and cracking provided insights of the performance degradation. Furthermore, the local current distributions within the cell were analyzed for three different operating modes: constant voltage, constant current, and constant power. Finally, a practical strategy was proposed to mitigate the performance degradation in the realistic cell operations, extending overall cell lifetime.

08 HYDROGEN↗
DOE OSTI2022

Creating two-dimensional solid helium via diamond lattice confinement

The universe abounds with solid helium in polymorphic forms. Therefore, exploring the allotropes of helium remains vital to our understanding of nature. However, it is challenging to produce, observe and utilize solid helium on the earth because high-pressure techniques are required to solidify helium. Here we report the discovery of room-temperature two-dimensional solid helium through the diamond lattice confinement effect. Controllable ion implantation enables the self-assembly of monolayer helium atoms between {100} diamond lattice planes. Using state-of-the-art integrated differential phase contrast microscopy, we decipher the buckled tetragonal arrangement of solid helium monolayers with an anisotropic nature compressed by the robust diamond lattice. These distinctive helium monolayers, in turn, produce substantial compressive strains to the surrounded diamond lattice, resulting in a large-scale bandgap narrowing up to ~2.2 electron volts. This approach opens up new avenues for steerable manipulation of solid helium for achieving intrinsic strain doping with profound applications.

42 ENGINEERING↗
DOE OSTI2022

Unconventional Highly Active and Stable Oxygen Reduction Catalysts Informed by Computational Design Strategies

Abstract Discovering and engineering new materials with fast oxygen surface exchange kinetics and robust long‐term stability is essential for the large‐scale, economically viable commercialization of solid oxide fuel cell (SOFC) technology. The perovskite catalyst material BaFe 0.125 Co 0.125 Zr 0.75 O 3 (BFCZ75), predicted to be promising from recent density functional theory (DFT) calculations and unconventional due to its extremely high Zr content and low electronic conductivity, exhibits oxygen reduction reaction surface exchange rates on par with Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3 (BSCF) and excellent stability at typical operating temperatures. New composite electrodes are engineered by integrating BFCZ75 with commercial electrode materials La 1– x Sr x MnO 3 (LSM) and La 1– x Sr x Co y Fe 1– y O 3 (LSCF) and achieve high performance as measured by low area specific resistance (ASR) values, with the LSCF/BFCZ75 ASR values comparable to top performing noncomposite electrode materials such as SrCo 0.8 Sc 0.2 O 3– δ , BaNb 0.05 Fe 0.95 O 3– δ and BaCo 0.7 Fe 0.22 Y 0.08 O 3– δ . The use of BFCZ75 as a composite with LSCF achieving low ASR values shows that BFCZ75 is highly active and can easily integrate into existing SOFC material supply chains, lowering the barrier for potential commercial application of new electrode materials. Finally, these findings point to a broader unexplored class of perovskite materials with high fractions of redox inactive species (e.g., Zr, Nb, and Ta) that may unlock new pathways to realizing improved commercial SOFCs.

Jacobs, Ryan↗
DOE OSTI2022

Mild hybridisation of turboprop engine with high-power-density integrated electric drives

Here this paper shares with the aerospace community a case study of turboprop mild hybridisation using a recently developed integrated drive system in the University of Nottingham, UK, within the ACHIEVE project under EU H2020 CleanSky 2 program (project No. 737814). The developed drive system enables green taxiing of a turboprop aircraft while on the ground with its engine off, and as an electrical generator when the turboprop is in the air. The entire system is designed to be able to integrate within the power auxiliary gear box (PAGB) of a turboprop aircraft. Some of the key features of the developed system include a high-speed permanent magnet machine (up to 14,200rpm) with dual three-phase design, SiC-based high power density (11.8kW/L for the power converter, 35.3kW/L and 7.2kW/kg for the machine active parts), integrated cooling design for high-temperature operation (>130°C ambient temperature), fault tolerance consideration with dual channel operation capabilities and sensorless control for entire operational conditions. This paper is giving an overview of the design process of the electrical machine, power converters, and its cooling of the entire drive. Numerical analysis (FEM and CFD) and some experimental results are presented to demonstrate the effectiveness and the desired performance of the developed integrated drive system.

42 ENGINEERING↗
DOE OSTI2021

Assessing the predictive impact of factor fixing with an adaptive uncertainty-based approach .

Despite widespread use of factor fixing in environmental modeling, its effect on model predictions has received little attention and is instead commonly presumed to be negligible. We propose a proof-of-concept adaptive method for systematically investigating the impact of factor fixing. The method uses Global Sensitivity Analysis methods to identify groups of sensitive parameters, then quantifies which groups can be safely fixed at nominal values without exceeding a maximum acceptable error, demonstrated using the 21-dimensional Sobol’ G-function. Furthermore, three error measures are considered for quantities of interest, namely Relative Mean Absolute Error, Pearson Product-Moment Correlation and Relative Variance. Results demonstrate that factor fixing may cause large errors in the model results unexpectedly, when preliminary analysis suggests otherwise, and that the default value selected affects the number of factors to fix. To improve the applicability and methodological development of factor fixing, a new research agenda encompassing five opportunities is discussed for further attention.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

From occupants to occupants: A review of the occupant information understanding for building HVAC occupant-centric control

Occupants are the core of the built environment. Traditional Heating, Ventilation, and Air-Conditioning (HVAC) systems operate with predefined schedules and maximum occupancy assumptions with no consideration of specific occupant information. These generalized assumptions usually do not align with the actual demand and result in over-conditioning and occupant discomfort. In recent years, with the aid of Information & Communication Technology (ICT) and Computer Science (CS), it is possible to acquire real-time and accurate occupant information to satisfy the exact thermal requirement through specific HVAC control in one particular built environment. This mechanism is called HVAC “Occupant-centric Control (OCC).” HVAC OCC strategy starts with collecting the occupant’s information (e.g., presence/absence) and then applies it to meet the occupant’s requirement (e.g., thermal comfort). However, even though some research studies and field pilot demonstrations have been devoted to the field of OCC, there is a lack of systematic knowledge about occupant data, which is the principal component of OCC for HVAC researchers and practitioners. To fill this gap, this review paper discusses OCC with a particular emphasis on occupant information and investigates how this information can assist HVAC operation in providing an acceptable built environment in required spaces during the required time. Finally, we provide a fine-grained, comprehensive picture of occupant information, discuss its features, the modalities of information feed-in into the HVAC control, and the application of commonly utilized occupant information for OCC.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Fe doped aluminoborate PKU-1 catalysts for the ketalization of glycerol to solketal: Unveiling the effects of iron composition and boron

An inexpensive Fe doped aluminoborate consisted of 18% Fe in PKU-1 material that exhibits high selectivity of 4-hydroxymethy-2,2-dimethyl-1,3-dioxolane (Solketal, 98.3%), considerable activity (TOF 51.7 h -1 ), and recyclable ability in the ketalization of glycerol to Solketal with acetone at 318 K has been developed. Here our study demonstrated that the structure of Fe (less agglomerated iron species vs. FeO x clusters) can be tuned by changing Fe loading in the PKU-1 material, which correlated well with experimental observations. Furthermore, the surface boron sites were promoted by iron loading and behaved as Lewis-acid sites to facilitate the reaction process of glycerol ketalization, while the Solketal selectivity was closely related with the structure of iron species in PKU-1, which was proved by kinetic studies, density function theory (DFT) calculations, and a series of spectroscopy studies. This investigation demonstrates that the surface B sites can play important roles in the reaction instead of being spectators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

3D Bacterial flagella as both synthetic biotemplates and ultrathin spacers for enhanced inter-particle coupling and solar energy harvesting

Linear light-absorbing nanomaterials are ideal for film-based solar harvesting applications as they form porous structures that can maximize the absorption and minimize the reflection of the solar light. Conventional 1D nanochains of plasmonic nanoparticle assemblies can achieve significantly broadened optical absorption through surface plasmon coupling, but their optical bands are still not broad enough to absorb through the solar spectrum and thus are not efficient solar absorbers. Here we discovered first by simulation that 3D structured nanochains of plasmonic nanoparticles presented a remarkably increased optical broadening effect and much longer redshift of the optical peaks due to the enhanced inter-particle coupling effect. Then we fabricated 3D nanochains by assembling gold nanoparticles (AuNPs) around 14 nm ultrathin bionanofibers, the bacterial flagella. Additionally, the ultrathin biotemplates enabled the 3D arrangement of 50 nm AuNPs along the nanofiber with a very small inter-particle gap, allowing the strong coupling of surface plasmons in a 3D manner. Consistent with the theoretical prediction, the 3D nanochains, when assembled into films, could effectively convert nearly the full spectrum of solar energy into heat, which was further efficiently converted into electricity through a thermoelectric generation unit. Our work represents a nanobiomaterial approach to highly efficient solar thermal power generation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Layer-structured triple-conducting electrocatalyst for water-splitting in protonic ceramic electrolysis cells: Conductivities vs. activity

Electron, proton and oxygen-triple-conducting materials are becoming the dominant steam electrode candidate to break the rate limit on the water-splitting reaction that throttles the performance of protonic ceramic electrolysis cells (PCECs). In this study, based on Pr 2 NiO 4+δ Ruddlesden-Popper phase, we manipulate these conductivities by Pr-site Ba substitution to probe the correlation of each conductivity with the kinetics of the elementary reaction steps. It is found that the proton conductivity is vital to sustain an extended active surface area for faster adsorption of reactants and desorption of products. The effect of oxygen conductivity is surprisingly found insignificant in the water-splitting reaction. On the contrary, surface oxygen removal is discovered as the most rate-limiting process. The electronic conductivity is not a direct limiting factor. However, an electron transfer process between the current collector and the electrode junction could introduce extra resistance that is perceptible at a high operating temperature range. The best water-splitting activity is obtained on a proton conductivity/oxygen surface desorption capability well-balanced sample after Ba substitution. As a result, a water-splitting reaction resistance of 0.022 Ωcm 2 , a current density of 1.96 A/cm 2 at 700 °C is achieved on Pr 1.7 Ba 0.3 NiO 4+δ , one of the best performances for PCECs.

25 ENERGY STORAGE↗