Search NASA⌕ Search

Engineering topics

Zerkle, Michael L.

Publications and source records attributed to Zerkle, Michael L..

Total thermal neutron cross section measurements of yttrium hydride from 0.0005 - 3 eV

Yttrium hydride serves as a neutron moderator material that enables compact, high temperature nuclear reactors. However, in order to accurately design and simulate a nuclear system relying upon yttrium hydride, the fundamental nuclear data of yttrium hydride must be well understood. Thermal neutron scattering law (TSL) evaluations represent an important aspect of nuclear data as thermal scattering can drastically alter the neutron multiplication factor of a system. Therefore, to support evaluation and validation of thermal neutron scattering for yttrium hydride, researchers at Rensselaer Polytechnic Institute (RPI) performed total thermal neutron cross section measurements for YH 1.68 and YH 1.85 over the energy range of 0.0005 - 3 eV. Further, these measurements represent the first total cross section measurements for yttrium hydride that encompass the entire thermal region. Comparisons were made against the ENDF-B/VIII.0, Zerkle & Holmes and Oak Ridge National Laboratory TSL evaluations, where generally good agreement was found.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Integral Experiment Request 305 CED-3a Summary Report

Under IER-305, critical experiments will be done with and without molybdenum sleeves on 7uPCX fuel rods. New critical assembly hardware has been designed and procured to accomplish the experiments with the fuel supported by in a 1.55 cm triangular-pitched array.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Integral Experiment Request 305: CED-3b Summary Report

Under IER-305, critical experiments were done with and without molybdenum sleeves on 7uPCX fuel rods. The experiments were done in new critical assembly hardware designed to support the 7uPCX fuel in a 1.55 cm triangular-pitched array.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Generation of the TSL for Zirconium Hydrides from Ab Initio Methods

Zirconium hydride (ZrHx) is a moderator material used in TRIGA and other reactors that may exist in multiple phases with varying stoichiometry, which include the δ phase and the ϵ phase. Current ENDF/B-VIII.0 ZrHx thermal scattering law (TSL) evaluations do not distinguish between phases. These sub-libraries were generated with the LEAPR module of NJOY using historic phonon spectra derived from a central force model and assume incoherent elastic scattering for both bound hydrogen and zirconium, which neglects the effects of crystal structures important for scattering from zirconium bound in ZrHx. In this work, the TSLs for hydrogen and zirconium bound in δ-ZrHx and ϵ-ZrH2 were generated from phonon spectra derived from modern ab initio lattice dynamics methods and ab initio molecular dynamics. Subsequently, TSLs for hydrogen and zirconium in ZrHx and ZrH2 were generated using the Full Law Analysis Scattering System Hub (FLASSH) code. The built-in generalized coherent elastic routine was used to generate the previously neglected elastic contribution from zirconium for this material. The present TSLs provide both a re-evaluation of the current ZrH sub-libraries and expansion of the set of TSLs available for the examination of neutrons in systems with zirconium hydride, permitting explicit treatment of δ and ϵ phases.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Pitch Variation Experiments in Water-Moderated Square-Pitched U(6.9)O 2 Fuel Rod Lattices with Fuel to Water Volume Ratios Spanning 0.08 to 0.67

The US Department of Energy (DOE) Nuclear Energy Research Initiative funded the design and construction of the Seven Percent Critical Experiment (7uPCX) at Sandia National Laboratories. The start-up of the experiment facility and the execution of the experiments described here were funded by the DOE Nuclear Criticality Safety Program. The 7uPCX is designed to investigate critical systems with fuel for light water reactors in the enrichment range above 5% 235 U. The 7uPCX assembly is a water-moderated and -reflected array of aluminum-clad square-pitched U(6.90%)O 2 fuel rods. Other critical experiments performed in the 7uPCX assembly are documented in LEU-COMP-THERM-078, LEU-COMP-THERM-080, LEU-COMPTHERM- 096, LEU-COMP-THERM-097, and LEU-COMP-THERM-101. The twenty-seven critical experiments in this series were performed in 2020 in the SCX at the Sandia Pulsed Reactor Facility. The experiments are grouped by fuel rod pitch. Case 1 is a base case with a pitch of 0.8001 cm and no water holes in the array. Cases 2 through 6 have the same pitch as Case 1 but contain various configurations with water holes, providing slight variations in the fuel-to-water ratio. Similarly, Case 7 is a base case with a pitch of 0.854964 cm and no water holes in the array. Cases 8 through 11 have the same pitch as Case 7 but contain various configurations with water holes. Cases 12 through 15 have a pitch of 1.131512 cm and differ according to the number of water holes in the array, with Case 12 having no water holes. Cases 16 through 19 have a pitch of 1.209102 cm and differ according to number of water holes in the array, with Case 16 having no water holes. Cases 20 through 23 have a pitch of 1.6002 cm and differ according to number of water holes in the array, with Case 20 having no water holes. Cases 24 through 27 have a pitch of 1.709928 cm and differ according to number of water holes in the array, with Case 24 having no water holes. As the experiment case number increases, the fuel-to-water volume ratio decreases.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Pitch Variation Experiments in Water-Moderated Square-Pitched U(6.90)O 2 Fuel Rod Lattices with Fuel to Water Volume Ratios Spanning 0.08 to 0.67

The US Department of Energy (DOE) Nuclear Energy Research Initiative funded the design and construction of the Seven Percent Critical Experiment (7uPCX) at Sandia National Laboratories. The start-up of the experiment facility and the execution of the experiments described here were funded by the DOE Nuclear Criticality Safety Program. The 7uPCX is designed to investigate critical systems with fuel for light water reactors in the enrichment range above 5 % 235 U. The 7uPCX assembly is a water-moderated and -reflected array of aluminum-clad square-pitched U(6.90 %)O 2 fuel rods. Other critical experiments performed in the 7uPCX assembly are documented in LEU-COMP-THERM-078, LEU-COMP-THERM-080, LEU-COMPTHERM- 096, LEU-COMP-THERM-097, and LEU-COMP-THERM-101. The fuel used in these experiments was fabricated using unirradiated 6.90 % enriched UO 2 fuel pellets from fuel elements designed to be used in the internal nuclear superheater section of the Pathfinder boiling water reactor operated in South Dakota by the Northern States Power Company in the 1960s. The fuel elements were obtained from The Pennsylvania State University where they had been stored for many years. The fuel pellets in those fuel elements were removed from the original Incoloy cladding and reclad in 3003 aluminum tubes and end caps for use in the experiments reported here. The purpose of these experiments was to measure the effects of decreasing the fuel-to-water volume ratio on the critical array size. This was accomplished by removing fuel rods from fully fueled configurations, effectively increasing the pitch of the fuel arrays in the assembly. The fuel rod pitch variations provided assembly configurations that ranged from strongly undermoderated to slightly overmoderated.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Re-evaluation of the TSL for Yttrium Hydride

Yttrium hydride (YH x ) is of interest as a high-temperature moderator material in advanced nuclear reactor systems because of its superior ability to retain hydrogen at elevated temperatures. Thermal neutron scattering laws (TSL) for hydrogen bound in yttrium hydride (H-YH 2 ) and yttrium bound in yttrium hydride (Y-YH 2 ) were previously evaluated by Naval Nuclear Laboratory using the ab initio approach and released in ENDF/B-VIII.0. In that work, density functional theory, incorporating the generalized gradient approximation (GGA) for the exchange-correlation energy, was used to simulate the face-centered cubic structure of YH 2 and calculate the interatomic Hellmann-Feynman forces for a 2×2×2 supercell containing 96 atoms. Lattice dynamics calculations using PHONON were used to determine the phonon density of states. The calculated phonon density of states for H and Y in YH 2 were then used to prepare H-YH 2 and Y-YH 2 TSL evaluations, in the incoherent approximation, using the LEAPR module of NJOY. In addition, elastic scattering was assumed to be incoherent for both H and Y. While the incoherent elastic scattering approximation is appropriate for H-YH 2 , it introduces an undesirable approximation for Y-YH 2 . In this work, we re-evaluate the TSL for Y-YH 2 using FLASSH (Full Law Analysis Scattering System Hub). Y-YH 2 is evaluated using the FLASSH generalized coherent elastic scattering capability in order to capture the Bragg peaks associated with the YH 2 crystal structure which were neglected in the prior NJOY-based evaluation due to limitations in LEAPR. An experimental approach to validate the Y-YH 2 TSL using neutron transmission measurements is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Validation of Thermal Scattering Laws for Light Water at Elevated Temperatures with Diffusion Experiments

Light water is the most important neutron moderator in many reactor applications. Thermal neutron scattering kernels for H bound in H 2 O are represented by ENDF-format thermal scattering laws (TSLs) evaluated at discrete temperatures T . Nuclear data evaluations are conventionally validated utilizing a combination of critical benchmarks and experimental cross section data. Existing public critical benchmarks may be inadequate for testing water TSLs over the full range of T of interest in reactor applications, and experimental thermal scattering cross section data for water is sparse at elevated T . In this work, MC21 is used to simulate the decay of the equilibrium thermal neutron flux in light-water spheres of several radii. The fundamental-mode time eigenvalue $\mathcal{a}$ is calculated at 22 °C and 227 °C (at saturation pressure) for each sphere using three different H-H 2 O TSLs. Fitting $\mathcal{a}$ to a polynomial function of geometric buckling allows calculation of the thermal neutron diffusion length L . Extrapolation lengths are treated as a function of the transport mean free path and geometry. Experimental L data from 25 publications at 49 temperatures (from 10 °C to 295 °C), computed by several different time-dependent and space-dependent decay methods, is used to develop an empirical fit of L vs. T . The MC21-calculated L for the TSLs tested are within ±1% of the predicted values at 22 °C and 227 °C. This validation approach, which may be repeated at arbitrary T , constitutes an integral benchmark specific to and characterizing the detailed physics of the thermal scattering kernel applied.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Integral Experiment Request 230 CED-3a (Summary Report)

During CED-3a, the following information is required, as specified in the April 1,2016 revision of the CEdT process manual: A detailed cost estimate; and, A resource loaded(baseline) schedule for execution of the experiment, data analysis, and publication. Appendix I is a Gantt chart or various phases of the project.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Integral Experiment Request 230 CED-2 Summary Report

A method is described to test the effect of increased moderation on the 7uPCX critical arrays using the existing assembly hardware. The proposed experiments will allow the exploration of the assembly fuel-to-water ratio out to, and possibly beyond, optimum moderation in the assembly. A significant result reported below is that the total uncertainty in the benchmark k eff in some of these experiments is reduced by about a factor of two compared to the uncertainties obtained in the fully-reflected experiments done to date.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Integral Experiment Request 209 CED-3a Summary Report.

Under IER-209, critical experiments like those done under IER-208 will be performed. The difference between the two sets of experiments is that, while the IER-208 experiments were done in the 0.800 cm pitch 7uPCX hardware, the IER-209 experiments will be done in the 0.855 cm pitch 7uPCX hardware.

99 GENERAL AND MISCELLANEOUS↗

The composition of seawater and the effect of seawater immersion on reactivity - 14499

Following the Fukushima Daiichi accident a need arose to perform defense-in-depth analyses to assess the effect of seawater immersion on the reactivity of nuclear fuel. This paper derives a composition for Standard Seawater based on the Reference Composition using the International Thermodynamic Equation of Seawater - 2010 (TEOS-10). The Reference Composition for seawater is based on measurements of the Atlantic surface seawater and assumes no organic or inorganic material is entrained in the seawater. Using the Reference Composition, a methodology for determining the composition of seawater as a function of temperature, pressure and salinity is developed. These seawater compositions may be used in nuclear criticality safety analyses to determine the effect of seawater immersion on reactivity. Results of a sensitivity study are presented that illustrate the effect of seawater immersion and salinity on the reactivity of a representative low-enriched uranium critical assembly, LEU-COMP-THERM-002. (author)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluation of an unexpected reflector temperature effect for water-isolated array configurations - 14500

It has been conventional wisdom in the criticality safety discipline that for spent fuel systems like water pit storage and transportation, modeling water at its peak density will maximize reactivity. Thus, modeling water at 3.96 deg. C will produce a conservatively bounding k{sub eff} for that configuration. This assumption has been found to be incorrect for certain high-leakage water-isolated array configurations. In fact, temperatures up to the boiling point of water can in fact be more reactive, and the most reactive temperature is highly dependent upon the specific fuel configuration being analyzed. In light of the accident at Fukushima-Daiichi - where the spent fuel pool temperature increased - knowledge of this unexpected behavior is essential to ensuring that criticality safety evaluations are conservatively bounding. To illustrate the reflector temperature effect, MC21 calculations are provided for a sensitivity study based on LEU-COMP-THERM-044, which models the IPEN/MB-01 reactor at various temperatures between 3.9 deg. C and 93.3 deg. C. (authors)

42 ENGINEERING↗

A covariance methodology for theoretically generated thermal neutron inelastic scattering data - 14502

The The S(α,β) double-differential thermal neutron scattering law tabulated in ENDF File 7 is, by convention, produced theoretically through fundamental scattering physics models for material-specific interatomic structures. Differential and integral inelastic scattering cross sections are calculated by numerically integrating over S(α,β). This information is supplied to nuclear system simulation codes. For systems with a significant thermal neutron flux, calculated system response parameters can be sensitive to this thermal cross section data. Formats and procedures are currently established for representing uncertainty information, or covariances, for various types of ENDF reaction data. However, no published ENDF evaluations contain covariance data for S(α,β) or associated differential and integral inelastic scattering cross sections. Furthermore, no accepted methodology exists for quantifying or representing covariances for this thermal scattering data. For most solids, the influence of a material's interatomic structure and dynamics on inelastic scattering cross sections can be adequately described through the phonon density of states (DOS). The phonon DOS is a probability density function of the population of available vibrational modes in energy, and it is typically the fundamental input for calculating S(α,β). Probable variation in the spectral shape of the phonon DOS may be established which characterizes uncertainties in the physics models and methodology employed in its production. Through Monte Carlo sampling of perturbations from the reference phonon spectrum, an S(α,β) covariance matrix may be generated. With appropriate sensitivity information, this can be propagated to generate covariance data for differential and integral inelastic scattering cross sections. In this work, hexagonal graphite is used as an example material for the purpose of demonstrating procedures for analyzing, calculating and representing uncertainty information for thermal neutron inelastic scattering data. (authors)

42 ENGINEERING↗

Production of the thermal scattering law and neutron scattering cross sections for ice from first principles - 14503

Water ice can exist in many polymorphic phases as a result of the wide range of geometric ordering possible for the hydrogen bonds between H{sub 2}O molecules. Ice Ih, which can form under normal atmospheric pressure at 273 K, is the most common type. Ab initio density functional theory, incorporating the generalized gradient approximation (GGA) for the exchange-correlation energy, is used to simulate the hexagonal structure of ice Ih and calculate phonon dispersion relations with harmonic lattice dynamics. While the unit cell for ice Ih contains four molecules with particular alignments of the H{sub 2}O molecules possible, the structure has globally disordered proton arrangement. To improve capturing this random distribution, a 12-molecule unit cell is incorporated along with a 2x2x2 supercell. The total phonon density of states is determined by randomly sampling dispersion relations in the first Brillouin zone. The translational, librational, bending, and stretching modes are produced with high-quality resolution and are consistent with the optical peaks and ranges observed in Raman, infrared, and inelastic neutron scattering experiments [1]. The phonon spectrum is used to calculate the S(α,β) thermal scattering law for ENDF [2] publication in the incoherent approximation, which is appropriate due to the relatively small coherent nuclear scattering cross section for H{sub 2}O. These theoretical results are compared to experimental S(α,β) at 268 K [3] and trends are found to be in good agreement. Finally, total scattering cross sections are calculated by integrating over S(α,β) to determine the incoherent inelastic cross sections and then separately adding the absorption and incoherent elastic components. These results are compared to experimental total cross sections for ice Ih at 115 K over a range of incident energies [4] and found to provide excellent agreement. (authors)

42 ENGINEERING↗