Search NASA⌕ Search

Engineering topics

Zhang, Bin

Publications and source records attributed to Zhang, Bin.

33 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Achievements of actively controlled divertor detachment compatible with sustained high confinement core in DIII-D and EAST

The compatibility of efficient divertor detachment with high-performance core plasma is vital to the development of magnetically controlled fusion energy. The joint research on the EAST and DIII-D tokamaks demonstrates successful integration of divertor detachment with excellent core plasma confinement quality, a milestone towards solving the critical plasma–wall-interaction (PWI) issue and core-edge integration for ITER and future reactors. In EAST, actively controlled partial detachment with T et,div ~ 5 eV around the strike point and H 98 > 1 in different H-mode scenarios including the high β P H-mode scenario have been achieved with ITER-like tungsten divertor, by optimizing the detachment access condition and performing detailed experiments for core-edge integration. For active long-pulse detachment feedback control, a 30 s H-mode operation with detachment-control duration being 25 s has been successfully achieved in EAST. DIII-D has achieved actively controlled fully detached divertor with low plasma electron temperature (T et,div ≤ 5 eV across the entire divertor target) and low particle flux (degree of detachment, DoD > 3), simultaneously with very high core performance (β N ~3, β P > 2 and H 98 ~ 1.5) in the high βP scenario being developed for ITER and future reactors. The high-β P high confinement scenario is characterized by an internal transport barrier (ITB) at large radius and a weak edge transport barrier (ETB, or pedestal), which are synergistically self-organized. Both the high-β P scenario and impurity seeding facilitate divertor detachment. The detachment access leads to the reduction of ETB, which facilitates the development of an even stronger ITB at large radius in the high β P scenario. Thus, this strong large radius ITB enables the core confinement improvement during detachment. In conclusion, these significant joint DIII-D and EAST advances on the compatibility of high confinement core and detached divertor show a great potential for achieving a high-performance core plasma suitable for long-pulse operation of fusion reactors with controllable steady-state PWIs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Molecular Design of Supported MoO x Catalysts with Surface TaO x Promotion for Olefin Metathesis

A series of supported 3% MoOx catalysts were synthesized by incipient-wetness impregnation of 5%-15% TaO x surface modified γ-Al 2 O 3 support. The catalysts were characterized by in situ spectroscopies (DRIFTS, Raman, UV-vis, XAS) and multiple chemical probes (C 2 H 4 /C 4 H 8 titration, C 3 H 6 -TPSR, steady state propylene metathesis, NH 3 -IR adsorption). The supported tantalum oxide phase was present as surface TaO x sites on the γ-Al 2 O 3 support that capped that Al 2 O 3 surface hydroxyls. The change in available surface hydroxyls caused the subsequent anchoring of MoOx species to occur at different surface hydroxyls. This shifted the anchoring of MoO x species from basic (Al-OH) to neutral (Al 2 -OH) to more acidic (Al 3 -OH) surface hydroxyls as well as perturbation of the remaining alumina surface hydroxyls by the surface TaO x sites. The TaO x surface modified γ-Al 2 O 3 support increased the number of activated surface MoO x sites (Ns) by ~6x and the TOF by ~10x resulting in an increased activity of ~60x. In conclusion, It was found that the specific anchoring surface hydroxyls rather than the extent of oligomerization of the surface MoO x sites control the number of activated MoO x sites and TOF for propylene metathesis. No relationship between the nature of the surface Lewis/Brønsted acid sites and Ns and TOF were found to be present.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Advances in the long-pulse steady-state high beta H-mode scenario with active controls of divertor heat and particle fluxes in EAST

Since the last IAEA-Fusion Energy Conference, the Experimental Advanced Superconducting Tokamak (EAST) research program has been, in support of ITER and CFETR, focused on development in terms of the long-pulse steady-state (fully noninductive) high beta H-mode scenario with active controls of the stationary and transient divertor heat and particle fluxes. The operational domain of the steady-state H-mode plasma scenario has been significantly extended with ITER-like tungsten mono-block divertor, plasma control and heating schemes. EAST has achieved several important milestones in the development of high β p H-mode scenario and its key physics and technologies. A 60 s-scale long-pulse steady-state high β p H-mode discharge with the major normalized plasma parameters similar to the designed performance of the CFETR 1GW fusion power operation scenario has been successfully established and sustained by pure RF heating and current drive. Several feedback control schemes have been developed for a sustained detachment with good core confinement. This includes control of the total radiation power, target electron temperature, and particle flux measured using divertor Langmuir probes or a combination of the control of target electron temperature and AXUV radiation near the X point. The detachment feedback control schemes have been integrated with small-ELM regimes and high β p scenario via neon seeding, enabling a core and edge compatible integrated high-beta scenario applicable to long-pulse operations. ELM suppression has been achieved using various methods, including resonant magnetic perturbations and impurity seeding. Full suppression of ELMs by using n=4 RMPs has been demonstrated for ITER for the first time in low input torque plasmas in EAST. Finally, EAST has been operated with helium to support the ITER research requirements for the first time. For a long-pulse, high bootstrap current fraction operation, a new lower tungsten divertor with active water-cooling has been installed, along with improvements in the heating and current drive capability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Non‐Traditional Positively‐Biased Narrow‐Band Perovskite Single‐Crystal Photodetectors Enabled by Interfacial Engineering

Abstract The positive bias in theory narrows down the depletion region and thus results in significant charge injection, which should be detrimental to charge generation and collection performance for traditional photodetectors. Here, instead, it is found that the external quantum efficiency (EQE) is increased by more than 50 times when the photodetector is positively biased. A positive bias of +6 V drives ion migration of Br − and Cs + towards the anode and cathode, respectively, leading to self‐doping within bulk single crystals to form an advantageous p‐i‐n junction for better charge collection in the devices. Meanwhile, the injected holes are allowed to tunnel through the cesium lead bromide/fullerene interface to reach the cathode which also significantly contributes to the enhancement of EQE in the forward‐biased devices. The positively‐biased narrow‐band (full width at half maxima (FWHM) = 16 nm) photodetectors exhibit a specific detectivity of 6.5 × 10 10 Jones at 550 nm, along with the −3 dB cutoff frequency of 2776 Hz. By manipulating charge injection and ion migration using interfacial engineering, a class of non‐traditional, positively‐biased, and highly narrow‐band photodetectors is demonstrated, which offers an alternative design strategy for imaging, biosensing, automatic control, and optical communication.

Li, Junchi↗
DOE OSTI2021

Integrated ELM and divertor power flux control using RMPs with low input torque in EAST in support of the ITER research plan

Experiments have been carried out at the EAST tokamak to study ITER-relevant scenario integration issues, related to edge localized mode (ELM) control in H-mode plasmas by the application of three-dimensional (3D) resonant magnetic perturbations (RMPs), which have a large impact on the execution of the ITER research plan. The EAST experiments have successfully demonstrated ELM suppression at normalized torque inputs similar to ITER. The application of RMP fields with high toroidal mode number (n = 4) reduces the impact of ELM control on energy and particle confinement compared to those use lower n (n = 1, 2) RMPs. Injection of successive pellets is found to be effective in increasing the plasma density in ELM-suppressed H-modes and reducing the divertor power without triggering large ELMs at EAST. Access to high recycling and radiative divertor conditions while maintaining ELM suppression has been demonstrated in EAST by the use of gas fuelling and neon impurity seeding. Both approaches have been found to be effective in reducing power fluxes to the divertor strike points in near-separatrix lobes for both n = 2 and n = 4 RMPs. Furthermore, reduction of power fluxes in off-separatrix lobes is only effective for n = 4 RMP application, which is consistent with magnetic topology modelling (including plasma response) results showing a shallow penetration into the confined plasma region of field lines connected to these lobes compared to n = 2. The EAST results support the use of high n 3D fields for ELM suppression in ITER high Q DT scenarios since they provide optimum integration features regarding energy and particle confinement, pellet fuelling, radiative divertor operation while eliminating ELM transient power loads and being compatible with low torque input.

pellet fuelling↗
DOE OSTI2021

Identifying the Catalytic Active Site for Propylene Metathesis by Supported ReO x Catalysts

A series of supported ReO x catalysts were investigated that allowed identifying the unique surface anchoring sites on oxide supports responsible for activating the surface ReO 4 sites for propylene metathesis (the catalytic active site). The catalysts were synthesized by incipient-wetness impregnation of aqueous HReO 4 onto the oxide supports (Al 2 O 3 , ZrO 2 , TiO 2 , SiO 2 and CeO 2 ), characterized under dehydrated and propylene metathesis reaction conditions with in situ spectroscopy (Raman, DRIFTS, UV-Vis and NAP-XPS), and chemically probed (CH 3 CH=CH 2 -TPSR, CH 2 =CH 2 /CH 3 CH=CHCH 3 titration and steady-state self-metathesis of propylene to ethylene and 2-butene). The initially calcined supported rhenia species anchor as isolated surface Re 7+ O 4 sites on the oxide supports by reacting with the surface hydroxyls (terminal S-OH, bridged S-OH-S and tricoordinated S 3 -OH) of the oxide supports. The specific oxide support was found to control the number of activated sites (Al 2 O 3 >> ZrO 2 > CeO 2 > TiO 2 > SiO 2 ) and propylene metathesis activity (Al 2 O 3 >> ZrO 2 >> TiO 2 ~ CeO 2 ~ SiO 2 ) revealing that the oxide support action is a potent ligand for the surface ReO x sites. The activation and specific activity of the surface ReO x sites depend on several factors (nature of surface hydroxyls (S 3 -OH > S-OH-S > S-OH), coordination of the oxide support surface cation (ZrO 7 , AlO 6 , CeO 4 ) and electronegativity of the oxide support cation (SiO 2 > Al 2 O 3 > TiO 2 > ZrO 2 > CeO 2 ). No relationships exist between olefin metathesis activity and acid strength of surface Lewis and Brønsted sites. Here, prior studies primarily focused on supported ReO x /Al 2 O 3 and the lack of examination of non-Al 2 O 3 supported rhenia catalysts precluded comparison between efficient and inefficient olefin metathesis catalysts, which prevented identifying the catalytic active site for olefin metathesis by supported ReO x catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

On the failure mechanisms of Cr-coated 316 stainless steel in bending fatigue tests

Here, fully-reversed cyclic bending tests were conducted on uncoated and Cr-coated 316 stainless steel specimens. At high stresses, the uncoated specimens outperformed the Cr-coated ones, while the trend reversed at low stresses. For Cr-coated specimens subjected to high stress amplitude loading, experimental observations showed crack initiation at the Cr/substrate interface due to shear steps formed from dislocation activities in the substrate—a conclusion supported by accompanying finite element analysis. Interfacial crack initiation was not observed under low stress amplitudes. This difference in fatigue crack initiation mechanisms induced an opposite trend in fatigue life between high and low stress amplitudes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Large-scale proteomic analysis of Alzheimer’s disease brain and cerebrospinal fluid reveals early changes in energy metabolism associated with microglia and astrocyte activation

Our understanding of Alzheimer’s disease (AD) pathophysiology remains incomplete. Here, for this work, we used quantitative mass spectrometry and coexpression network analysis to conduct the largest proteomic study thus far on AD. A protein network module linked to sugar metabolism emerged as one of the modules most significantly associated with AD pathology and cognitive impairment. This module was enriched in AD genetic risk factors and in microglia and astrocyte protein markers associated with an anti-inflammatory state, suggesting that the biological functions it represents serve a protective role in AD. Proteins from this module were elevated in cerebrospinal fluid in early stages of the disease. In this study of >2,000 brains and nearly 400 cerebrospinal fluid samples by quantitative proteomics, we identify proteins and biological processes in AD brains that may serve as therapeutic targets and fluid biomarkers for the disease.

60 APPLIED LIFE SCIENCES↗
NASA NTRS2018

Automated Contingency Management for Water Recycling System

To enable effective management, planning, and operations for future missions that involve a crewed space habitat, operational support must be migrated from Earth to the habitat. Intelligent System Health Management technologies (ISHM) promise to enable the future space habitats to increase the safety and mission success while minimizing operational risks. In this paper, Water Recycling System (WRS) deployed at NASA Ames Research Center's Sustainability Base is used for verification and validation of the proposed solution. Our work includes the development of the WRS simulation model based on its dynamic physical characteristics and the design of Automatic Contingency Management (ACM) framework that integrates fault diagnosis and optimization. In WRS modeling, a nominal model with fault injectors is developed. Fault detection and isolation techniques are then developed for isolating causes and identifying the severity of the faults. Dynamic Programming (DP) based fault mitigation strategies are designed to accommodate the faults in the system. A series of simulations are presented with different fault modes and the results indicate that the proposed ACM system can alleviate the fault in the WRS optimally regarding energy consumption and effects of the fault.

Systems Health Management↗
NASA NTRS2018

Orbital Variations and Impacts on Observations from SNPP, NOAA 18-20, and AQUA Sun-Synchronous Satellites

The AQUA, SNPP, and NOAA 18-20 PM sun-synchronous satellites were designed with similar local time, local solarzenith angles, and overlapping temporal coverage. Although the satellites are expected to have fixed local equator-crossing time, during the satellite lifetime, the equator-crossing times of these satellites drift. For NOAA 18-19, the driftin equator-crossing time is significant (few hours) and no correction has been done over the lifetime. For SNPP andAQUA, correction in the orbital inclination angle was periodically performed to maintain the equator-crossing timearound the designed value. The impact of systematic drift of the local observation time during the satellite life cycle canbe significant and should be accounted for when using multi-year time series of satellite products in long-termenvironmental studies. In this paper, the equator-crossing time drift of AQUA, SNPP, and NOAA 18-20, the correctionof SNPP and AQUA equator-crossing time via orbital inclination angle change, and the consequent local solar zenithangle variation are evaluated. The impact of such drift on low-latitude mean brightness temperature trend derived fromthe similar ~11 μm thermal emissive channel of AQUA MODIS CH31, SNPP Visible Infrared Imaging RadiometerSuite (VIIRS) CH15 and NOAA 18-19 HIRS CH08 are analyzed. The drift in the mean brightness temperature measuredby these sensors is combined as a function of local time and analyzed using diurnal cycle analysis. The mean brightnesstemperature drift for SNPP VIIRS is reconciled within the context of much larger temperature drift of NOAA 18-19.

Shao, Xi↗