Search NASA⌕ Search

Engineering topics

Zhang, He

Publications and source records attributed to Zhang, He.

At least 37 records · Page 2

Near-field Fourier ptychography: super-resolution phase retrieval via speckle illumination

High spatial resolution is the goal of many imaging systems. While designing a high-resolution lens with diffraction-limited performance over a large field of view remains a difficult task, creating a complex speckle pattern with wavelength-limited spatial features is easily accomplished with a simple random diffuser. With this observation and the concept of near-field ptychography, we report a new imaging modality, termed near-field Fourier ptychography, which is to be used for high-resolution imaging challenges in both microscopic and macroscopic imaging settings. 'Near-field' refers to placing the object at a short defocus distance with a large Fresnel number. We predict a speckle pattern with fine spatial features on the object instead of directly resolving the spatial features via a high-resolution lens. We then translate the object (or speckle) to different positions and acquire the corresponding images by using a low-resolution lens. A ptychographic phase retrieval process is used to recover the complex object, the unknown speckle pattern, and the coherent transfer function at the same time. In a microscopic imaging setup, we use a 0.12 numerical aperture (NA) lens to achieve an NA of 0.85 in the reconstruction process. In a macroscale photographic imaging setup, we achieve similar to 7-fold resolution gain by using a photographic lens. The collection optics do not determine the final achievable resolution; rather, the speckle pattern's feature size does. This is similar to our recent demonstration in fluorescence imaging settings (Guo et al., Biomed. Opt. Express , 9(1), 2018). The reported imaging modality can be utilized in light, coherent X-ray, and transmission electron imaging systems to increase resolution and provide quantitative absorption and object phase contrast.

42 ENGINEERING↗

Development of a bunched beam electron cooler for the Jefferson Lab electron-ion collider

Jefferson Lab is in the process of designing an electron-ion collider with unprecedented luminosity at a 65 GeV center-of-mass energy. This luminosity relies on ion cooling in both the booster and the storage ring of the accelerator complex. The cooling in the booster will use a conventional DC cooler similar to the one at COSY. The high-energy storage ring, operating at a momentum of up to 100 GeV/nucleon, requires novel use of bunched-beam cooling. We will present a new design for a Circulator Cooler Ring for bunched-beam electron cooling. This requires the generation and transport of very high-charge magnetized bunches, acceleration of the bunches in an energy recovery linac, and transfer of these bunches to a circulating ring that passes the bunches 11 times through the proton or ion beam inside cooling solenoids. This design requires the suppression of the effects of space charge and coherent synchrotron radiation using shielding and RF compensation.

Benson, Stephen V.↗

Multi-Stage Electron Cooling Scheme for JLEIC

JLEIC is the future electron ion collider under design at Jefferson Lab, which will provide a luminosity up to 1034 cm-2s-1. Electron cooling is essential for JLEIC to overcome the intrabeam scattering effect, reduce the ion beam emittance and thus achieve the high luminosity. The cooling time is approximately in proportion to the square of the energy and the 6D emittance. To avoid the difficulty of cooling the ion beam with large emittance at high energy, a multi-stage cooing scheme was designed for JLEIC. The ion beam was cooled at the low energy to reduce the emittance. Then it was ramped up to the collision energy. During the collision, electron cooling is implemented to maintain the emittance and the luminosity. Simulations for proton beam and lead ion beam at various stages are presented in this paper.

Zhang, He↗

Experimental Demonstration of Ion Beam Cooling with Pulsed Electron Beam

Cooling ion beams at high energy is presently considered for several ion colliders, in order to achieve high luminosities by enabling a significant reduction of emittance of hadron beams. Electron beam at cooling channel in a few to tens MeV can be accelerated by a RF/SRF linac, and thus using bunched electrons to cool bunched ions. To study such cooling process, the DC electron gun of EC35 cooler at the storage ring CSRm, IMP was modified by pulsing the grid voltage. A 0.07-3.5 micro-second pulse length with a repetition frequency of less than 250 kHz and synchronized with the ion revolution frequency was obtained. The first experimental demonstration of cooling of a coasting and bunched ion beam by a pulsed electron beam was carried out. Data analysis indicates the bunch length shrinkage and the momentum spread reduction of bunched 12C+6 ion beam as evidence of cooling. A longitudinal grouping effect of the coasting ion beam by the electron pulses has also been observed*. In this paper, we will present experimental results and comparison to the simulation modelling, particularly on the bunched electron cooling data after carefully analyzing the beam diagnostic signals.

Zhang, Yuhong↗

Fast multipole methods for multiparticle simulations

The fast multipole method (FMM) reduces the computation cost of the pairwise non-oscillating interaction between N particles from O(N^2) to O(N). In the FMM, the contribution from a source particle is represented as a multipole expansion, while the contributions from multiple faraway sources can be combined into a local expansion around an objective particle. Without the dependence on a grid covering the whole domain under study, the FMM treats any charge distribution and geometry in a natural way. It avoids artificial smoothing due to the grid size and redundant computation on the free space grids. We will introduce the concept of the FMM using the Coulomb interaction as an example and then explain how the FMM can be extended to arbitrary non-oscillating interactions. Examples and discussions on how the FMM can be used in scientific simulations, especially in accelerator physics will also be provided.

Zhang, He↗

Dispersive Electron Cooling for JLEIC

JLEIC is the electron ion collider under design at Jefferson Lab, which will provide a luminosity up to 1034 cm-2s-1. To reach the high luminosity, short ion and electron bunches with high charge density colliding in high frequency are proposed in JLEIC design. The high charge density of the ion beam leads to strong intrabeam scattering effect, which enlarges the ion beam emittance and ruins the luminosity if not mitigated. Magnetized electron cooling is implemented to overcome the intrabeam scattering effect and to reduce or maintain the ion beam emittance. In this paper, we discuss the redistribution of the cooling effects in the longitudinal and the transverse directions by introducing the dispersion of the ion beam in the cooling section. When the charge density of the cooling electron beam varies, the dispersion of the ion beam leads to an increase of the transverse cooling rate and a reduction of the longitudinal cooling rate, while the total decrement of the Courant-Snyder invariant of the ion beam increases. Both theoretical analysis and numerical calculation are presented.

Zhang, He↗

Improve the efficiency of the Cartesian tensor based fast multipole method for Coulomb interaction using the traces

To compute the non-oscillating mutual interaction for a systems with N points, the fast multipole method (FMM) has an efficiency that scales linearly with the number of points. Specifically, for Coulomb interaction, FMM can be constructed using either the spherical harmonic functions or the totally symmetric Cartesian tensors. In this paper, we will present that the effciency of the Cartesian tensor-based FMM for the Coulomb interaction can be significantly improved by implementing the traces of the Cartesian tensors in calculation to reduce the independent elements of the n-th rank totally symmetric Cartesian tensor from (n + 1)(n + 2)=2 to 2n + 1. The computation complexity for the operations in FMM are analyzed and expressed as polynomials of the highest rank of the Cartesian tensors. For most operations, the complexity is reduced by one order. Numerical examples regarding the convergence and the effciency of the new algorithm are demonstrated. As a result, a reduction of computation time up to 50% has been observed for a moderate number of points and rank of tensors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Role of Microphysical Parameterizations with Droplet Relative Dispersion in IAP AGCM 4.1

In previous studies we see that accurate descriptions of the cloud droplet effective radius (Re) and the autoconversion process of cloud droplets to raindrops (Au) can effectively improve simulated clouds and surface precipitation, and reduce the uncertainty of aerosol indirect effects in global climate models (GCMs). In this paper, we implement cloud microphysical schemes including two-moment Au and R e considering relative dispersion of the cloud droplet size distribution into version 4.1 of the Institute of Atmospheric Physics atmospheric GCM (IAP AGCM 4.1), which is the atmospheric component of the Chinese Academy of Sciences-Earth System model (CAS-ESM 1.0). An analysis of the effects of different schemes shows that the newly implemented schemes can improve both the simulated shortwave (SWCF) and longwave cloud radiative forcings (LWCF) as compared to the standard scheme in IAP AGCM 4.1. The new schemes also effectively enhance the large-scale precipitation, especially over low latitudes, although the influences of total precipitation are insignificant for different schemes. Further studies show that similar results can be found with the Community Atmosphere Model 5.1 (CAM5.1).

54 ENVIRONMENTAL SCIENCES↗

Development of a Bunched Beam Electron Cooler based on ERL and Circulator Ring Technology for the Jefferson Lab Electron-Ion Collider

Jefferson Lab is in the process of designing an electron ion collider with unprecedented luminosity at a 45 GeV center-of-mass energy. This luminosity relies on ion cooling in both the booster and the storage ring of the accelerator complex. The cooling in the booster will use a conventional DC cooler similar to the one at COSY. The high-energy storage ring, operating at a momentum of up to 100 GeV/nucleon, requires novel use of bunched-beam cooling. There are two designs for such a cooler. The first uses a conventional Energy Recovery Linac (ERL) with a magnetized beam while the second uses a circulating ring to enhance both peak and average currents experienced by the ion beam. This presentation will describe the design of both the Circulator Cooling Ring (CCR) design and that of the backup option using the stand-alone ERL operated at lower charge but higher repetition rate than the ERL injector required by the CCR-based design.

Benson, Stephen V.↗

Optimization of the cavity heat load and trip rate for CEBAF

The Continuous Electron Beam Accelerator Facility at JLab has 200 RF cavities in the north linac and the south linac respectively after the 12 GeV upgrade. The purpose of this work is to simultaneously optimize the heat load and the trip rate for the cavities and to reconstruct the pareto-optimal front in a timely manner when some of the cavities are turned off. Various optimizers are investigated to find the one with the best efficiency on this specific problem. The derivative information of the heat load is used to effectively create the initial populations. With less than 20 cavities off, the pareto-optimal front can be reestablished within a minute.

Zhang, H.↗

Simulation Study on JLEIC High Energy Bunched Electron Cooling

In the Jefferson Lab (JLab) Electron Ion Collider (JLEIC) project the traditional electron cooling technique is used to reduce the ion beam emittance at the booster ring, and to compensate the intrabeam scattering effect and maintain the ion beam emittance during the collision at the collider ring. Different with other electron coolers using DC electron beam, the proposed electron cooler at the JLEIC ion collider ring uses high energy bunched electron beam, provided by an ERL. In this paper, we report the new electron cooling simulation program developed at JLab to fulfil specific simulation requirements of JLEIC and some recent simulation study on how the electron cooling rate will be affected by the bunched electron beam properties, such as the correlation between the longitudinal position and momentum, the bunch size, and the Larmor emittance.

Zhang, He↗

Sensitivity study of cloud parameterizations with relative dispersion in CAM5.1: impacts on aerosol indirect effects

Aerosol-induced increase of relative dispersion of cloud droplet size distribution ε exerts a warming effect and partly offsets the cooling of aerosol indirect radiative forcing (AIF) associated with increased droplet concentration by increasing the cloud droplet effective radius ( R e ) and enhancing the cloud-to-rain autoconversion rate (Au) (labeled aBut, the total dispersion effects on both R e and Au are not fully considered in most GCMs, especially in different versions of the Community Atmospheric Model (CAM). Furthermore, in order to accurately evaluate the dispersion effect on AIF, the new complete cloud parameterizations of R e and Au explicitly accounting for ε are implemented into the CAM version 5.1 (CAM5.1), and a suite of sensitivity experiments is conducted with different representations of ε reported in the literature. It is shown that the shortwave cloud radiative forcing is much better simulated with the new cloud parameterizations as compared to the standard scheme in CAM5.1, whereas the influences on longwave cloud radiative forcing and surface precipitation are minimal. In addition, consideration of the dispersion effect can significantly reduce the changes induced by anthropogenic aerosols in the cloud-top effective radius and the liquid water path, especially in the Northern Hemisphere. The corresponding AIF with the dispersion effect considered can also be reduced substantially by a range of 0.10 to 0.21 W m -2 at the global scale and by a much bigger margin of 0.25 to 0.39 W m -2 for the Northern Hemisphere in comparison with that of fixed relative dispersion, mainly dependent on the change of relative dispersion and droplet concentrations (Δε/ΔN ).

54 ENVIRONMENTAL SCIENCES↗

Heparanase-1-induced shedding of heparan sulfate from syndecan-1 in hepatocarcinoma cell facilitates lymphatic endothelial cell proliferation via VEGF-C/ERK pathway

Heparanase-1/syndecan-1 axis plays critical roles in tumorigenesis and development. The main mechanism includes heparanase-1 (HPA-1) degrades the heparan sulfate chain of syndecan-1 (SDC-1), and the following shedding of heparan sulfate from tumor cell releases and activates SDC-1 sequestered growth factors. However, the significance of Heparanase-1/syndecan-1 axis and its effects on the microenvironment of lymphatic metastasis in hepatocellular carcinogenesis (HCC) procession have not been reported. Herein, we found that HPA-1 could degrade the heparan sulfate on hepatocarcinoma cell surface. Importantly, HPA-1-induced shedding of heparan sulfate chain from SDC-1 facilitated the release of vascular endothelial growth factor C (VEGF-C) from SDC-1/VEGF-C complex into the medium of hepatocarcinoma cell. Further studies indicated that VEGF-C secretion from hepatocarcinoma cell promoted lymphatic endothelial cell growth through activating extracellular signal-regulated kinase (ERK) signaling. Taken together, this study reveals a novel existence of Heparanase-1/syndecan-1 axis in hepatocarcinoma cell and its roles in the cross-talking with the microenvironment of lymphatic metastasis. - Highlights: • SDC-1 anchors VEGF-C via its HS chains. • Secreted HPA-1 from hepatocarcinoma cell cleaves HS chains of SDC-1. • The shedding of SDC-1 HS chains releases VEGF-C from SDC-1/VEGF-C complex. • LMWH inhibits VEGF-C secretion through stabilizing SDC-1/VEGF-C complex. • VEGF-C secretion from hepatocarcinoma cell facilitates LEC growth via ERK signaling.

60 APPLIED LIFE SCIENCES↗

Fast multipole method using Cartesian tensor in beam dynamic simulation

Here, the fast multipole method (FMM) using traceless totally symmetric Cartesian tensor to calculate the Coulomb interaction between charged particles will be presented. The Cartesian tensor-based FMM can be generalized to treat other non-oscillating interactions with the help of the differential algebra or the truncated power series algebra. Issues on implementation of the FMM in beam dynamic simulations are also discussed.

43 PARTICLE ACCELERATORS↗

Enhancement of DEN-induced liver tumorigenesis in heme oxygenase-1 G143H mutant transgenic mice

Heme oxygenase (HO) is the rate-limiting enzyme in heme metabolism. HO-1 exhibits anti-oxidative and anti-inflammatory function via the actions of its metabolite, respectively. A growing body of evidence demonstrates that HO-1 is implicated in the pathogenesis and progression of several types of cancer. However, whether HO-1 takes part in healthy-premalignant-malignant transformation is still undefined. In this study, we took advantage of transgenic mice which over-expressed HO-1 dominant negative mutant (HO-1 G143H) and observed its susceptibility to DEN-induced hepatocarcinogenesis. Our results indicate that HO-1 G143H mutant accelerates the progression of tumorigenesis and tumor growth. The mechanism is closely related to enhancement of ROS production which induce more hepatocytes death and secretion of inflammatory cytokines, proliferation of surviving hepatocytes. Our result provides the direct evidence that HO-1 plays an important protective role in liver carcinogenesis. Alternatively, we suggest the possible explanation on effect of HO-1 promoter polymorphism which involved in tumorigenesis. - Highlights: • Enhancement of DEN-induced hepatocarcinogenesis in HO-1 G143H Tg mice. • HO-1G143H mutant enhanced DEN-induced ROS production and liver injury. • HO-1G143H mutant aggravated DEN-induced changes of inflammatory factors and cell proliferation.

60 APPLIED LIFE SCIENCES↗

Development of the electron cooling simulation program for MEIC

In the medium energy electron ion collider (MEIC) project at Jefferson Lab, the traditional electron cooling technique is used to reduce the ion beam emittance at the booster ring, and to compensate the intrabeam scattering effect and maintain the ion beam emittance during collision at the collider ring. A DC cooler at the booster ring and a bunched beam cooler at the collider ring are proposed. To fulfil the requirements of the cooler design for MEIC, we are developing a new program, which allows us to simulate the following cooling scenarios: DC cooling to coasting ion beam, DC cooling to bunched ion beam, bunched cooling to bunched ion beam, and bunched cooling to coasting ion beam. The new program has been benchmarked with existing code in aspect of accuracy and efficiency. The new program will be adaptive to the modern multicore hardware. We will present our models and some simulation results.

Zhang, He↗