Search NASA⌕ Search

Engineering topics

Zimmerman, Jeramy D.

Publications and source records attributed to Zimmerman, Jeramy D..

At least 19 records

Effect of molecular permanent dipole moment on guest aggregation and exciton quenching in phosphorescent organic light emitting diodes

This study explores the effect of molecular permanent dipole moment (PDM) on aggregation of guest molecules in phosphorescent host–guest organic light-emitting diodes (OLEDs). Through a combination of photoluminescence measurements, high-angle annular dark-field scanning transmission electron microscopy analysis, and an Ising model based physical vapor-deposition simulation, we show that higher PDM of tris[2-phenylpyridinato-C2,N]iridium(III) guest can actually lead to a reduced aggregation relative to tris[bis[2-(2-pyridinyl-N)phenyl-C] (acetylacetonato)iridium(III) when doped into a non-polar host 1,3,5-tris(carbazol-9-yl)benzene. This study further explores the effect of host polarity by using a polar host 3′,5′-di(carbazol-9-yl)-[1,1′-biphenyl]-3,5-dicarbonitrile, and it is shown that the polar host leads to reduced guest aggregation. In conclusion, this study provides a comprehensive understanding of the impact of molecular PDM on OLED material efficiency and stability, providing insights for optimizing phosphorescent OLED materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling the Impacts of Material Properties on Oscillatory Neuron Behavior

In this study, neuromorphic computing, which mimics the functions of biological brains, offers improvements in both latency and energy efficiency over typical von Neumann computing architectures. Spiking neural networks can be especially power-efficient because they encode information temporally and can use more sparse electrical inputs. Here, we study the design of volatile memristors (variable resistors with memory) for neuronal devices, with particular consideration toward the feasibility of all-on-chip oscillation using built-in capacitance. We use circuit simulations to model the behavior of oscillator neurons with a range of realistic material properties. We find that energy inputs increase with insulating-phase resistivity, thermal conductivity, and device aspect ratio. However, we also find that the minimum capacitance needed for oscillation decreases with increasing insulating-phase resistivity, which opposes the constraints for power efficiency. Based on published data on NbO 2 , VO 2 , and EuNiO 3 , we find that existing materials can be engineered for all-on-chip spiking using their parasitic capacitance.

36 MATERIALS SCIENCE↗

Organic photosensitive devices made using semi-orthogonal solvents and methods of making the same

Disclosed herein are organic photosensitive optoelectronic device comprising a first layer comprising one or more of a first layer material, a second layer comprising one or more of a second layer material, and a third layer comprising one or more of a third layer material. The second layer may be dissolved in a semi-orthogonal solvent. The first layer and the third layer may be very slightly soluble or practically insoluble in the semi-orthogonal solvent.

Forrest, Stephen R.↗

Cluster characterization in atom probe tomography: Machine learning using multiple summary functions

In this work, we develop a machine learning-based method to characterize intracluster concentration (ρ c ), background concentration (ρ b ), clustering radius (r̄), and radius dispersity (δ r ) in simulated atom probe tomography data using multiple spatial statistics summary functions to train a Bayesian regularized neural network. Here, we build upon previous work that utilized Ripley’s K-function by incorporating additional features from nearest-neighbor spatial statistics summary functions to better characterize concentration-based metrics. The addition of nearest-neighbor based features allows for highly accurate estimates of ρ c and ρ b , both with 90% of the predictions within 4.0% of the real value; the root-mean-square errors are reduced by 81.5% and 92.8% from predictions using only K-function based features, respectively. Additionally, including these nearest-neighbor based features improves the ability to differentiate between r̄ and δ r .

36 MATERIALS SCIENCE↗

An intermediate model for fitting triplet–triplet annihilation in phosphorescent organic light emitting diode materials

Triplet–triplet annihilation (TTA) is one of the primary contributors to efficiency roll-off and permanent material degradation in phosphorescent organic light-emitting diodes. Here, the two limiting case models typically used to quantify this quenching mechanism are multi-step Dexter and single-step Förster, which, respectively, assume ideal Fickian diffusion or perfect trapping of triplet excitons. For device-relevant guest doping levels (typically 5–12 vol. %), both significant diffusion of excitons and trapping due to spatial and energetic disorder exist, so neither conventional model fits experimental data well. We develop and validate an intermediate TTA model, which is a weighted average of the limiting cases of pure radiative decay (no TTA) and multi-step Dexter based TTA that returns an effective TTA rate constant and a parameter quantifying the portion of well-isolated excitons. Kinetic Monte-Carlo simulations and time-resolved photoluminescence measurements of an archetype host–guest system demonstrate that our intermediate model provides significantly improved fits with more realistic physical values, is more robust to variations in experimental conditions, and provides an analysis framework for the effects of trapping on TTA.

30 DIRECT ENERGY CONVERSION↗

MOCVD Surface Preparation of V-Groove Si for III-V Growth

V-groove nanopatterning of Si substrates has recently demonstrated promise for achieving high-quality III-V-on-Si epitaxy while providing a lower-cost processing route than chemo-mechanical polishing to produce epi-ready planar wafers. A key factor in determining the crystalline quality of III-V buffer layers is the Si surface structure and its chemical composition. Unlike planar Si surfaces, the surfaces of V-grooves prior to growth have not been studied in detail. Here, we study the surface of V-groove Si prepared for GaP nucleation via X-ray photoelectron spectroscopy and low-energy electron diffraction. We identify several pretreatments, using both 830 and 1000 annealing under an As background pressure, as being suitable for deoxidizing and cleaning the V-groove Si surface. The V-groove Si was found to behave similarly to reference Si(0 0 1) and Si(1 1 1) planar samples, demonstrating that in situ techniques such as reflection anisotropy spectroscopy can be used on reference samples to infer the state of the V-groove surface, and indicating that the extensive research on planar Si surfaces can be directly applied to V-grooves.

III-V epitaxy↗

Exciton-blocking treatments for buffer layers in organic photovoltaics

Disclosed herein are exciton-blocking treatments for buffer layers used in organic photosensitive optoelectronic devices. More specifically, the organic photosensitive optoelectronic devices described herein include at least one self-assembled monolayer disposed on the surface of an anode buffer layer. Methods of preparing these devices are also disclosed. The present disclosure further relates to methods of forming at least one self-assembled monolayer on a substrate.

Forrest, Stephen R.↗

Understanding Fragmentation of Organic Small Molecules in Atom Probe Tomography

In atom probe tomography of molecular organic materials, field ionization of either entire molecules or molecular fragments can occur, but the mechanism governing this behavior was not previously understood. This work explains when a doubly ionized small molecule organic material is expected to undergo fragmentation. Here, we find that multiple detection events arising from post-ionization fragmentation of a parent molecular dication into two daughter ions is well explained by the free energy and geometries of the molecules computed using density functional theory. Of the systems studied, exergonic free energies for formation of the daughter ions, smaller activation energies for dissociation, and increases in bond length are all found to be quantitative predictors for ion fragmentation. This work expands the applicability of atom probe tomography to organic materials by increasing the fundamental understanding of processes occurring during this analysis technique.

36 MATERIALS SCIENCE↗

Hybrid planar-mixed heterojunction for organic photovoltaics

Disclosed herein are organic photosensitive optoelectronic devices comprising two electrodes in superposed relation; a mixed photoactive layer located between the two electrodes, wherein the mixed photoactive layer comprises at least one donor material having a HOMO energy and at least one acceptor material having a LUMO energy, wherein the at least one donor material and the at least one acceptor material form a mixed donor-acceptor heterojunction; a photoactive layer adjacent to and interfacing with the mixed photoactive layer, wherein the photoactive layer comprises a material having a LUMO energy within 0.3 eV of the LUMO energy of the at least one acceptor material or a HOMO energy within 0.3 eV of the HOMO energy of the at least one donor material; and a buffer layer adjacent to and interfacing with the mixed photoactive layer.

Forrest, Stephen R.↗

Towards a III-V Solar Cell with a Metamorphic Graded Buffer Directly Grown on V-Groove Si Substrates

V-groove Si substrates offer a promising route for the direct growth of III-V solar cells on low-cost, photovoltaic-grade Si. In this work, we develop a method for coalescing GaP nucleated on V-groove substrates into thin films suitable for the growth of III-V solar cells. We demonstrate the ability to suppress nucleation-related defects by modifying the V-groove substrate to cover the (0 0 1)-oriented Si V-groove tops with SiN x . A threading dislocation density (TDD) of 5 × 10 7 cm -2 was measured with electron channeling contrast imaging. Continuing work will focus on further reducing the TDD and the growth of a GaAs solar cell on a GaP on V-groove Si template.

41 EE - Solar Energy Technologies Office (EE-4S)↗

Templated Liquid-Phase Epitaxy of InP Structures on Si

We demonstrate direct and over-dielectric heteroepitaxial growth of InP on Si substrates through templated liquid-phase epitaxy. Large grains (5 um) are indicated by electron channeling contrast imaging and epitaxy is confirmed by x-ray diffraction.We demonstrate direct and over-dielectric heteroepitaxial growth of InP on Si substrates through templated liquid-phase epitaxy. Large grains (5 um) are indicated by electron channeling contrast imaging and epitaxy is confirmed by x-ray diffraction.

CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SU↗

Templated Vapor-Liquid-Solid Epitaxy of III-V Semiconductors on Silicon

Epitaxial growth on silicon remains the most promising method to reduce the cost of optoelectronic-quality III-V semiconductors. Several approaches exist to epitaxially grow III-V material from the vapor phase, but control of 3-D structures remains difficult with these methods. In this work, we present a novel epitaxial growth technique in which photolithography and wet etching are used to establish the geometry of group-III metal, which is then converted to III-V semiconductor by annealing with exposure group-V precursor. The resulting material has been shown to align to the substrate lattice and is optically active, making it a promising approach for III-V PV technologies.

government↗

Nucleation of High-Quality GaP on Si Through V-Groove Si Substrates

III-V growth on nanopatterned v-groove Si is a promising route to low cost Si-based tandem solar cells. Here, we study a high temperature MOVPE nucleation regime for growing GaP on v-groove Si. It is shown that MOVPE growth conditions can be used to control the facet selectivity of the GaP nucleation onto the v-grooves. The most promising nucleation condition was studied further, and it was demonstrated that it can be coalesced into a smooth thin film with promising material quality.

41 EE - Solar Energy Technologies Office (EE-4S)↗

Application of templated vapor-liquid-solid growth to heteroepitaxy of InP on Si

Direct growth of III–V semiconductors on Si promises to combine the superior optoelectronic properties of III–Vs with the existing large-scale fabrication capabilities for Si. Vapor-liquid-solid-based growth techniques have previously been used to grow optoelectronic-quality III–Vs in polycrystalline films and various photolithography-defined features. We show that templated vapor-liquid-solid growth can produce epitaxial material when performed on crystalline substrates. In templated vapor-liquid-solid growth, the metal group-III precursor is evaporated along with a capping SiO 2 layer on the crystalline substrate, then melted and converted with exposure to a vapor-phase group-V precursor. We demonstrate homoepitaxial growth of InP on InP wafers using two forms of the SiO x capping layer to confine the liquid metal: evaporated SiO 2 and solgel SiO x , the latter of which is necessary for growth on Si. We then demonstrate heteroepitaxial growth of InP islands on Si substrates from both evaporated and electroplated In metals. The templated vapor-liquid-solid process provides better material utilization and growth rates than common vapor-phase techniques, with similar control and convenience, providing a path toward the large-scale fabrication of integrated optoelectronic components.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Three dimensional cluster analysis for atom probe tomography using Ripley’s K-function and machine learning

The size and structure of spatial molecular and atomic clustering can significantly impact material properties and is therefore important to accurately quantify. Ripley’s K-function (K(r)), a measure of spatial correlation, can be used to perform such quantification when the material system of interest can be represented as a marked point pattern. This work demonstrates how machine learning models based on K (r)-derived metrics can accurately estimate cluster size and intra-cluster density in simulated three dimensional (3D) point patterns containing spherical clusters of varying size; over 90% of model estimates for cluster size and intra-cluster density fall within 11% and 18% error of the true values, respectively. These K (r)-based size and density estimates are then applied to an experimental APT reconstruction to characterize MgZn clusters in a 7000 series aluminum alloy. Here we find that the estimates are more accurate, consistent, and robust to user interaction than estimates from the popular maximum separation algorithm. Using K (r) and machine learning to measure clustering is an accurate and repeatable way to quantify this important material attribute.

36 MATERIALS SCIENCE↗

19‐1: Invited Paper: Atom Probe Tomography for Understanding OLED Morphology

We have recently demonstrated that atom probe tomography (APT) can be applied to Organic Light Emitting Diode (OLED) materials. APT can measure the mass and position of molecules in a film with sub‐Dalton and sub‐nm resolutions, allowing for morphology measurements of OLED systems. We will discuss the technique and key results in emissive guest‐host systems.

Zimmerman, Jeramy D.↗

Organic optoelectronics with electrode buffer layers

There is disclosed an organic optoelectronic device comprising two electrodes in superposed relation comprising an anode and a cathode, at least one donor material and at least one acceptor material located between the two electrodes forming a donor-acceptor heterojunction, an anode buffer layer adjacent to the anode and a cathode buffer layer adjacent to the cathode, and an intermediate layer adjacent to at least one of the anode and cathode buffer layers, wherein when the intermediate layer is adjacent to the anode buffer layer, the intermediate layer is chosen to facilitate the transport of holes to the anode buffer layer, and when the intermediate layer is adjacent to the cathode buffer layer, the intermediate layer is chosen to facilitate the transport of electrons to the cathode buffer layer. Also disclosed are methods of making the same.

36 MATERIALS SCIENCE↗