Search NASA⌕ Search

Engineering topics

de Leon, Nathalie P.

Publications and source records attributed to de Leon, Nathalie P..

14 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Design and fabrication of robust hybrid photonic crystal cavities

Abstract Heterogeneously integrated hybrid photonic crystal cavities enable strong light–matter interactions with solid state, optically addressable quantum memories. A key challenge to realizing high quality factor ( Q ) hybrid photonic crystals is the reduced index contrast on the substrate compared to suspended devices in air. This challenge is particularly acute for color centers in diamond because of diamond’s high refractive index, which leads to increased scattering loss into the substrate. Here, we develop a design methodology for hybrid photonic crystals utilizing a detailed understanding of substrate-mediated loss, which incorporates sensitivity to fabrication errors as a critical parameter. Using this methodology, we design robust, high-Q, GaAs-on-diamond photonic crystal cavities, and by optimizing our fabrication procedure, we experimentally realize cavities with Q approaching 30,000 at a resonance wavelength of 955 nm.

Abulnaga, Alex↗
DOE OSTI2024

Methods for Color Center Preserving Hydrogen‐Termination of Diamond

Abstract Chemical functionalization of diamond surfaces by hydrogen is an important method for controlling the charge state of near‐surface fluorescent color centers, an essential process in fabricating devices such as diamond field‐effect transistors and chemical sensors, and a required first step for realizing families of more complex terminations through subsequent chemical processing. In all these cases, termination is typically achieved using hydrogen plasma sources that can etch or damage the diamond, as well as deposited materials or embedded color centers. This work explores alternative methods for lower‐damage hydrogenation of diamond surfaces, specifically the annealing of diamond samples in high‐purity, non‐explosive mixtures of nitrogen and hydrogen gas, and the exposure of samples to microwave hydrogen plasmas in the absence of intentional stage heating. The effectiveness of these methods are characterized by x‐ray photoelectron spectroscopy (XPS), and comparison of the results to density‐functional modelling of the surface hydrogenation energetics implicates surface oxygen ligands as the primary factor limiting the termination quality of annealed samples. Finally, photoluminescence (PL) spectroscopy is used to verify that both the annealing and reduced sample temperature plasma methods are non‐destructive to near‐surface ensembles of nitrogen‐vacancy (NV) centers, in stark contrast to plasma treatments that use heated sample stages.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Diamond surface functionalization via visible light–driven C–H activation for nanoscale quantum sensing

Nitrogen-vacancy (NV) centers in diamond are a promising platform for nanoscale NMR sensing. Despite significant progress toward using NV centers to detect and localize nuclear spins down to the single spin level, NV-based spectroscopy of individual, intact, arbitrary target molecules remains elusive. Such sensing requires that target molecules are immobilized within nanometers of NV centers with long spin coherence. The inert nature of diamond typically requires harsh functionalization techniques such as thermal annealing or plasma processing, limiting the scope of functional groups that can be attached to the surface. Solution-phase chemical methods can be readily generalized to install diverse functional groups, but they have not been widely explored for single-crystal diamond surfaces. Moreover, realizing shallow NV centers with long spin coherence times requires highly ordered single-crystal surfaces, and solution-phase functionalization has not yet been shown with such demanding conditions. In this work, we report a versatile strategy to directly functionalize C–H bonds on single-crystal diamond surfaces under ambient conditions using visible light, forming C–F, C–Cl, C–S, and C–N bonds at the surface. This method is compatible with NV centers within 10 nm of the surface with spin coherence times comparable to the state of the art. As a proof-of-principle demonstration, we use shallow ensembles of NV centers to detect nuclear spins from surface-bound functional groups. Our approach to surface functionalization opens the door to deploying NV centers as a tool for chemical sensing and single-molecule spectroscopy.

Science & Technology - Other Topics↗
DOE OSTI2023

Indistinguishable telecom band photons from a single Er ion in the solid state

Atomic defects in the solid state are a key component of quantum repeater networks for long-distance quantum communication1. Recently, there has been significant interest in rare earth ions, in particular Er 3+ for its telecom band optical transition that allows long-distance transmission in optical fibres. However, the development of repeater nodes based on rare earth ions has been hampered by optical spectral diffusion, precluding indistinguishable single-photon generation. Here, we implant Er 3+ into CaWO 4 , a material that combines a non-polar site symmetry, low decoherence from nuclear spins and is free of background rare earth ions, to realize significantly reduced optical spectral diffusion. For shallow implanted ions coupled to nanophotonic cavities with large Purcell factor, we observe single-scan optical linewidths of 150 kHz and long-term spectral diffusion of 63 kHz, both close to the Purcell-enhanced radiative linewidth of 21 kHz. This enables the observation of Hong–Ou–Mandel interference between successively emitted photons with a visibility of V = 80(4)%, measured after a 36 km delay line. We also observe spin relaxation times T 1,s = 3.7 s and T 2,s > 200 μs, with the latter limited by paramagnetic impurities in the crystal instead of nuclear spins. Furthermore, this represents a notable step towards the construction of telecom band quantum repeater networks with single Er 3+ ions.

42 ENGINEERING↗
DOE OSTI2023

Chemical Profiles of the Oxides on Tantalum in State of the Art Superconducting Circuits

Abstract Over the past decades, superconducting qubits have emerged as one of the leading hardware platforms for realizing a quantum processor. Consequently, researchers have made significant effort to understand the loss channels that limit the coherence times of superconducting qubits. A major source of loss has been attributed to two level systems that are present at the material interfaces. It is recently shown that replacing the metal in the capacitor of a transmon with tantalum yields record relaxation and coherence times for superconducting qubits, motivating a detailed study of the tantalum surface. In this work, the chemical profile of the surface of tantalum films grown on c‐plane sapphire using variable energy X‐ray photoelectron spectroscopy (VEXPS) is studied. The different oxidation states of tantalum that are present in the native oxide resulting from exposure to air are identified, and their distribution through the depth of the film is measured. Furthermore, it is shown how the volume and depth distribution of these tantalum oxidation states can be altered by various chemical treatments. Correlating these measurements with detailed measurements of quantum devices may elucidate the underlying microscopic sources of loss.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Hybrid Integration of GaP Photonic Crystal Cavities with Silicon-Vacancy Centers in Diamond by Stamp-Transfer

Optically addressable solid-state defects are emerging as some of the most promising qubit platforms for quantum networks. Maximizing photon-defect interaction by nanophotonic cavity coupling is key to network efficiency. We demonstrate fabrication of gallium phosphide 1-D photonic crystal waveguide cavities on a silicon oxide carrier and subsequent integration with implanted silicon-vacancy (SiV) centers in diamond using a stamp-transfer technique. The stamping process avoids diamond etching and allows fine-tuning of the cavities prior to integration. After transfer to diamond, we measure cavity quality factors (Q) of up to 8900 and perform resonant excitation of single SiV centers coupled to these cavities. For a cavity with a Q of 4100, we observe a 3-fold lifetime reduction on-resonance, corresponding to a maximum potential cooperativity of C = 2. In conclusion, these results indicate promise for high photon-defect interaction in a platform which avoids fabrication of the quantum defect host crystal.

Purcell enhancement↗
DOE OSTI2023

Neutral Silicon Vacancy Centers in Undoped Diamond via Surface Control

Neutral silicon vacancy centers (SiV 0 ) in diamond are promising candidates for quantum applications; however, stabilizing SiV 0 requires high-purity, boron-doped diamond, which is not a readily available material. Here, we demonstrate an alternative approach via chemical control of the diamond surface. We use low-damage chemical processing and annealing in a hydrogen environment to realize reversible and highly stable charge state tuning in undoped diamond. The resulting SiV 0 centers display optically detected magnetic resonance and bulklike optical properties. Controlling the charge state tuning via surface termination offers a route for scalable technologies based on SiV 0 centers, as well as charge state engineering of other defects.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Neutral Silicon-Vacancy Centers in Diamond via Photoactivated Itinerant Carriers

Neutral silicon-vacancy (Si-V 0 ) centers in diamond are promising candidates for quantum network applications because of their exceptional optical properties and spin coherence. However, the stabilization of Si-V 0 centers requires careful Fermi-level engineering of the diamond host material, making further technological development challenging. Here, we show that Si-V 0 centers can be efficiently stabilized by photoactivated itinerant carriers. Even in this nonequilibrium configuration, the resulting Si-V 0 centers are stable enough to allow for resonant optical excitation and optically detected magnetic resonance. Furthermore, our results pave the way for on-demand generation of Si-V 0 centers as well as other emerging quantum defects in diamond.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Nanoscale covariance magnetometry with diamond quantum sensors

Nitrogen vacancy (NV) centers in diamond are atom-scale defects that can be used to sense magnetic fields with high sensitivity and spatial resolution. Typically, the magnetic field is measured by averaging sequential measurements of single NV centers, or by spatial averaging over ensembles of many NV centers, which provides mean values that contain no nonlocal information about the relationship between two points separated in space or time. In this work, we propose and implement a sensing modality whereby two or more NV centers are measured simultaneously, and we extract temporal and spatial correlations in their signals that would otherwise be inaccessible. We demonstrate measurements of correlated applied noise using spin-to-charge readout of two NV centers and implement a spectral reconstruction protocol for disentangling local and nonlocal noise sources.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Erbium-implanted materials for quantum communication applications

Erbium-doped materials can serve as spin-photon interfaces with optical transitions in the telecom C band, making them an exciting class of materials for long-distance quantum communication. However, the spin and optical coherence times of Er 3+ ions are limited by currently available host materials, motivating the development of new Er 3+ -containing materials. Here we demonstrate the use of ion implantation to efficiently screen prospective host candidates, and show that disorder introduced by ion implantation can be mitigated through post-implantation thermal processing to achieve inhomogeneous linewidths comparable to bulk linewidths in as-grown samples. We present optical spectroscopy data for each host material, which allows us to determine the level structure of each site, allowing us to compare the environments of Er 3+ introduced via implantation and via doping during growth. Here, we demonstrate that implantation can generate a range of local environments for Er 3+ , including those observed in bulk-doped materials, and that the populations of these sites can be controlled with thermal processing.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Biocompatible surface functionalization architecture for a diamond quantum sensor

Significance Diamond-based quantum sensing enables nanoscale measurements of biological systems with unprecedented sensitivity. Potential applications of this emerging technology range from the investigation of fundamental biological processes to the development of next-generation medical diagnostics devices. One of the main challenges faced by bioquantum sensing is the need to interface quantum sensors with biological target systems. Specifically, such an interface needs to maintain the highly fragile quantum states of our sensor and at the same time be able to fish intact biomolecules out of solution and immobilize them on our quantum sensor surface. Our work overcomes these challenges by combining tools from quantum engineering, single-molecule biophysics, and material processing.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Materials challenges for quantum technologies based on color centers in diamond

Emerging quantum technologies require precise control over quantum systems of increasing complexity. Defects in diamond, particularly the negatively charged nitrogen-vacancy center, are a promising platform with the potential to enable technologies ranging from ultra-sensitive nanoscale quantum sensors, to quantum repeaters for long distance quantum networks, to simulators of complex dynamical processes in many-body quantum systems, to scalable quantum computers. While these advances are due in large part to the distinct material properties of diamond, the uniqueness of this material also presents difficulties, and there is a growing need for novel materials science techniques for characterization, growth, defect control, and fabrication dedicated to realizing quantum applications with diamond. In this article we identify and discuss the major materials science challenges and opportunities associated with diamond quantum technologies.

36 MATERIALS SCIENCE↗