Search NASA⌕ Search

Engineering topics

van Duin, Adri C.T.

Publications and source records attributed to van Duin, Adri C.T..

8 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Thermally induced structural evolution and nanoscale interfacial dynamics in Bi-Sb-Te layered nanostructures

Layered chalcogenides, including Bi-Sb-Te ternary alloys and heterostructures, are renowned as thermoelectric and topological insulators and have recently been highlighted as plasmonic building blocks beyond noble metals. Here, we conduct joint in situ transmission electron microscopy and density functional theory calculations to investigate the temperature-dependent nanoscale dynamics and interfacial properties, identifying the role of native defects and edge configurations in the anisotropic sublimation of Bi 2 Te 3 -Sb 2 Te 3 heterostructures and Sb 2-x Bi x Te 3 alloys. We report structural dynamics, including edge evolution, layer-by-layer sublimation, and the formation and coalescence of thermally induced polygonal nanopores. These nanopores are initiated by preferential dissociation of tellurium, reducing thermal stability in heterostructures. Triangular and quasi-hexagonal configurations dominate nanopore structures in heterostructures. Our calculations reveal antisite defects (Te Sb and Te Bi ) as key players in defect-assisted sublimation. These findings enhance our understanding of nanoscale dynamics and assist in designing tunable low-dimensional chalcogenides.

Bi2Te3-Sb2Te3 heterostructure↗
DOE OSTI2024

ReaxFF Reactive Force Field for Exploring Electronically Switchable Polarization in Zn 1– x Mg x O Ferroelectric Semiconductors

Cation misfit in traditional ferroelectric crystals offers a new material platform that can drive electronic components toward structural miniaturization and high-density integration, enabling deviation from von-Neumann architectures. Here, we explore ferroelectricity in Zn 1–x Mg x O, a nontraditional ferroelectric material with tunable properties. Using data from density-functional theory calculations, we have developed a ReaxFF reactive force field to explore the ferroelectric properties of Zn 1–x Mg x O and reveal the hysteresis behavior. We discover that ferroelectric switching can be observed at a critical thickness of 10 nm with a residual polarization of ~100 μC/cm 2 . Our analysis indicates that an increase in Mg-substitution correlates with a decrease in the coercive field. We also observe a strong temperature dependence of the coercive field in Zn 1–x Mg x O, with values decreasing as the temperature increases. Additionally, we find that the distribution of Mg atoms significantly impacts the coercive field, with a clustered distribution leading to a substantial increase. In particular, a decrease in coercive field values is observed when Mg atoms are randomly distributed, compared to uniform distribution. Furthermore, leveraging tunable hysteresis behavior offered by varied percentages and distribution of Mg-substitution provides valuable insights into the design of next-generation functional devices and will inspire further investigations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Computationally guided synthesis of carbon coated mesoporous silica materials

Mesoporous silica materials (MSMs) are well-suited for biomedical applications due to their unique features, including a large surface area and tunable pore size. To enhance their durability, the small pores in MSMs are filled with carbon precursors and then carbonized to prevent them from interacting with unreacted silicic acid. Here, in this study, we synthesized and healed MSMs using a combination of non-reactive and reactive molecular dynamics (MD) simulations. The non-reactive MD simulation revealed that the self-assembly of Pluronic® L64 polymers in water resulted in nearly 80 % hydrogen bonds between the hydrophilic sections of the micelle and water. In the bond-boosted ReaxFF MD simulations, silicic acid precursors were condensed on the micelle surface, with over 60 % of them leading to the creation of periodic mesoporous silica within the system. Condensation of silicic acid precursors at 300 K with bond-boosting and at 1500 K without it both significantly promoted the polymerization of Si(OH) 4 , with the latter doubling the rate compared to the former. Subsequently, we healed the MSM surface by carbonizing carbon precursors inside an MSM pore. Polyethylene (PE) and high-rank lignite were identified as the most suitable precursors due to their ability to form turbostratic graphene structures. High-rank lignite exhibited the highest carbon conversion ratio to 6-membered rings, closely followed by PE, in the carbon ring formation analysis. Additionally, the production of gases, such as H 2 , increased significantly for PE at both 2200 K and 2600 K, indicating the conversion of a considerable portion of carbon into graphitic or turbostratic structures. The carbonization of PE primarily led to the formation of planar (sp 2 ) structures, while sucrose yielded the least planar structures. Finally, we studied the protective blocking of unreacted silicic acid precursor by considering a PET turbostratic graphene structure in a silica mesopore formed at 2600 K. The trajectory analysis showed that the surface of the silica was effectively coated with PET tar, preventing unreacted silicic acid from interacting with the inner silica pore surface. These findings offer valuable insights into the synthesis and carbonization-based healing processes of MSMs, enhancing their potential for various biomedical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Mechanistic study of pH effect on organic solvent nanofiltration using carboxylated covalent organic framework as a modeling and experimental platform

Covalent organic framework (COF) membranes for organic solvent nanofiltration (OSN) have attracted growing interest due to their high stability, well-defined pore size, and controllable pore functionality. In aqueous nanofiltration processes, solution pH has a significant effect on membrane permeability, selectivity, and fouling. However, our understanding of pH effects on OSN processes is still limited. In this work, we present experimental and reactive force field molecular dynamics (ReaxFF MD) simulation results on the effect of pH on OSN using a well-characterized carboxylated COF (C-COF) membrane. Filtration experimental and modeling results both demonstrate that pH changes can affect solvent permeance and solute rejection dramatically. Specifically, methanol permeance decreases with the increase of NaOH and HCl concentration, respectively. When Alcian Blue dye was used as the solute in methanol, the selectivity increased from 23% to 98% when changing the feed pH from 2.2 to 10.1, respectively. While ReaxFF MD results show that C-COF solvated pore size is only marginally affected by the pH of solution, methanol diffusion is affected by the size of methanol-solvated Na + and Cl - ions, which increase with increasing Na + and Cl - concentrations. Solution pH change also affected solute solvation layer thicknesses and C-COF pore charges, contributing to the significant AB dye selectivity increase with pH increase. To summarize, we have shown that dramatic changes in C-COF selectivity are not anomalous in OSN, but are instead controllable by varying feed solution pH to modify solvated solute radii and surface charge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Nanomechanical investigation of the interplay between pore morphology and crack orientation of amorphous silica

Porous amorphous silica (a-SiO 2 ) is of both fundamental and practical interests, as they exhibit a large specific surface area and tunable porous network. However, the brittle nature of a-SiO 2 and the presence of pre-existing cracks at both micro- and nano-scales lead to complex mechanical behavior. Here, we systematically investigate the effects of pre-existing crack and its orientation on the mechanical properties of a-SiO 2 with varying pore shapes using reactive molecular dynamics simulations. We demonstrate that pore shape will primarily influence the Young’s modulus (E) and critical energy release rate (G IC ). We further investigate the impact of pore shape and crack orientation by local characterization of the structural parameters. By defining the high stress and inter-mediate regions, the overall mechanical properties are found to be greatly influenced by the pore shape which can be reflected through the spatial distribution of von Mises stress. Overall, G IC is found to increase with the increase of ligament length (also known as pore wall thickness). Meanwhile, the effect of the pre-existing crack on the crack propagation process is confirmed by analyzing the density distribution evolution. These results highlight the interplay between pore morphology and crack orientation in controlling the fracture behaviors in brittle porous materials.

42 ENGINEERING↗
DOE OSTI2021

Experimental and computational investigations of ethane and ethylene kinetics with copper oxide particles for Chemical Looping Combustion

In this work, reaction pathways for the oxidation of methane, ethane, and ethylene with CuO was obtained by ReaxFF Molecular Dynamics (MD) simulations between temperatures of 1000 K and 2000 K. Experiments in a fixed-bed flow reactor were preformed with methane, ethane, and ethylene at temperatures ranging from 500 K to 1000 K with time-dependent species measurements from an Electron-Ionization Molecular Beam Mass Spectrometer (MBMS), and species validation with Gas Chromatography (GC) for detection of complete and intermediate combustion products. The MBMS and GC allow for the detection of oxygenated species and larger species produced from radical reformation. The simulation and experiment agree on the production of such species as CH 3 CHO, CH 2 O, CO, and H 2 O, which allow for the creation of simple C1 and C2 reaction pathways, which can be used in kinetic models of C2 species and larger fuels such as biofuels, which inherently depend on C1 and C2 kinetics and reaction pathway. The simulation and experiment disagree on the formation of C 2 H 2 , CH 3 OH, and CO 2 with large amounts of C 2 H 2 being measured in the ethylene oxidation simulations and CH 3 OH being formed in methane oxidation simulations, while neither species were experimentally found. In the case of CO 2 large amounts of CO 2 are rapidly produced in experiments with C2 fuels at 800 K, while little-to-no CO 2 was observed in simulations. This is believed to be resulting from the extremely short timescale of the simulations, preventing total oxidation of the fuel. Here, the differences in products produced between simulation and experiment allow for the potential to modify the ReaxFF potential functions to more accurately model the experimental products of Cu–H–O–C reaction kinetics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Low-temperature carbonization of polyacrylonitrile/graphene carbon fibers: A combined ReaxFF molecular dynamics and experimental study

Graphene inclusion in a polymer matrix is a promising route to significantly enhance the mechanical properties of low-grade carbon fibers (CFs). Using ReaxFF molecular dynamics simulation, the atomistic mechanism leading to this enhancement is investigated. We demonstrate that the graphene edges along with the nitrogen and oxygen functional groups play a catalytic role and act as seeds to expedite alignment of the all-carbon rings, which are starting sites for the growth of graphitic structures. To examine the role of this proposed mechanism that enhances the graphitic structure of PAN/graphene CFs, we discuss the experimental results wherein the PAN/graphene CFs carbonized at 1250 C demonstrate 91% (from 632 to 1207 MPa) increase in strength and 101% (from 88 to 177 GPa) enhancement in Young’s modulus compared to PAN-based CFs carbonized at 1500 C. In conclusion, these enhanced mechanical properties of low-grade carbon fibers achieved via graphene inclusion at decreased carbonization temperature provide a means to realize both energy savings and cost reduction.

42 ENGINEERING↗