Search NASASearch

NASA NTRS · 20210005632

Technology Validation Program for Mars Aerobot Micromission

Abstract

UNKNOWN

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Yavrouian, A., Weiss, J., Jones, J., Hall, J., Cameron, J., Patzold, J., Bachelder, A., Kerzhanovich, V., Cutts, J.. 1999-02-01. Technology Validation Program for Mars Aerobot Micromission. https://ntrs.nasa.gov/citations/20210005632

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

CubeSat Platform Enables an Inexpensive Space Telescope

Space telescopes have historically been expensive to plan, build, and launch. The Astrophysics Division of NASA’s Science Mission Directorate is now leveraging the development of small spacecraft known as CubeSats by universities and industry to enable capable and reliable platforms with well-focused goals, rapid development times, and affordable costs

technology

LUVOIR: Engineering Design & Technology Overview

The Large Ultraviolet / Optical / Infrared Surveyor (LUVOIR) is one of four large mission concepts being study by NASA in preparation for the 2020 Decadal Survey in Astronomy and Astrophysics. Over the past three and a half years, the LUVOIR Science and Technology Definition Team (STDT) and Study Office at NASA's Goddard Space Flight Center have developed a broad, compelling science case for LUVOIR, and detailed engineering point designs to achieve it. In this paper, we provide an overview of the two LUVOIR concepts: LUVOIR-A, a 15-m segmented, obscured aperture observatory, and LUVOIR-B, an 8-m segmented, unobscured aperture observatory. Both versions of LUVOIR cover a broad spectral range between 100 nm and 2.5 µm with a suite of imagers and spectrographs, including the High Definition Imager (HDI), the LUVOIR Ultraviolet Multi-object Spectrograph (LUMOS), and the Extreme Coronagraph for Living Planetary Systems (ECLIPS). LUVOIR-A will carry an additional fourth instrument, Pollux, a high-resolution UV spectropolarimeter being studied by the Centre National d'Etudes Spatiales (CNES). Both versions of LUVOIR are also designed to be serviceable and upgradeable. We will also provide a summary of the LUVOIR technology development program, which identifies critical enabling technologies, enhancing technologies, and a development plan to mature those technologies to TRL 6.

technology

Lightweight ZERODUR: Validation of Mirror Performance and Mirror Modeling Predictions

Upcoming spaceborne missions, both moderate and large in scale, require extreme dimensional stability while relying both upon established lightweight mirror materials, and also upon accurate modeling methods to predict performance under varying boundary conditions. We describe tests, recently performed at NASA's XRCF chambers and laboratories in Huntsville Alabama, during which a 1.2 m diameter, f/1.2988% lightweighted SCHOTT lightweighted ZERODUR(TradeMark) mirror was tested for thermal stability under static loads in steps down to 230K. Test results are compared to model predictions, based upon recently published data on ZERODUR(TradeMark). In addition to monitoring the mirror surface for thermal perturbations in XRCF Thermal Vacuum tests, static load gravity deformations have been measured and compared to model predictions. Also the Modal Response(dynamic disturbance) was measured and compared to model. We will discuss the fabrication approach and optomechanical design of the ZERODUR(TradeMark) mirror substrate by SCHOTT, its optical preparation for test by Arizona Optical Systems (AOS). Summarize the outcome of NASA's XRCF tests and model validations

technology